OV23850 23.8MP product brief lead free available in a lead-free package DSC-Like Performance and Advanced Digital Imaging Features for Next-Generation Flagship Smartphones OmniVision's OV23850 is a high performance PureCel-S™ 23.8-megapixel image sensor that bring DSC-like image quality and performance to flagship smartphones. The 1/2.3-inch OV23850 captures stunning ultra-high resolution images and video while enabling advanced digital imaging features. The sensor utilizes OmniVision's new stacked die technology which separates the imaging array from the image sensor processing pipeline into a stacked die structure. This enables additional sensor functionality, such as phase detection autofocus (PDAF), two-dimensional contrast fast autofocus and high dynamic range (HDR) video, while maintaining a much smaller footprint. Supporting an active array of 5632 x 4224 pixels (23.8 megapixels) operating at 24 frames per second (fps), the OV23850 is the highest resolution image sensor currently available that captures images and video in a 4:3 aspect ratio. The OV23850 outputs 16:9 format video of up to 4.5-megapixels operating at 60 fps, enabling clear video preview on smartphone displays. It is capable of recording quad high definition (QHD) video at 30 fps in HDR mode to enable 'always on' HDR preview mode. Additionally, the sensor supports 720p high definition (HD) video at 120 fps, and 1080p HD video at 90 fps for crisp, slow motion video recording. The OV23850 fits into a 10.5 x 10.5 mm module with a z-height of 5.7 mm. Find out more at www.ovt.com. OV23850 Applications ¬ Cellular Phones ¬ PC Multimedia ¬ Tablets Ordering Information Product Features ¬ OV23850-G05A (color, chip probing, 150 µm backgrinding, reconstructed wafer with good die) ¬ 1.12 x 1.12 µm pixel ¬ 4 lane MIPI @ 2 Gbps/lane or 8 lane MIPI @ 1 Gbps/lane ¬ optical size of 1/2.3" ¬ 1/2/4/8 lane LVDS with 1 Gbps/lane ¬ 34.52° CRA for 6.3 mm z-height ¬ programmable controls for frame rate, mirror and flip, cropping, and windowing ¬ supports images sizes: - 23MP (5648x4232) - 18MP (5648x3184) - 6MP (2824x2120) - 1080p (1928x1088) - 720p (1288x728) Product Specifications ¬ 4-exposure HDR and alternate row HDR with on-chip recombination ¬ image quality control: DPC, ABLC, lens shading correction ¬ phase defect auto focus (PDAF) support ¬ supports 4x4 and 2x2 binning ¬ supports output formats: - 14/12/10-bit HDR RAW - 10-bit RGB RAW - DPCM 12/10-8 compression ¬ standard serial SCCB interface ¬ supports horizontal and vertical subsampling ¬ three on-chip phase lock loops (PLLs) ¬ 3K bytes of embedded OTP for customer use ¬ 5632 x 4224 @ 24 fps 10-bit, 5632 x 3168 @ 30 fps 10-bit, 6MP @ 45 fps ¬ active array size: 5632 x 4224 ¬ input clock frequency: 6 ~ 64 MHz ¬ power supply: - core: 1.2V - analog: 2.8V - I/O: 1.8V ¬ maximum image transfer rate: - 5632x4224: 24 fps - 5632x3168: 30 fps - 2816x2112: 45 fps ¬ power requirements: - active: TBD - standby: TBD - XSHUTDOWN: TBD ¬ scan mode: progressive ¬ minimum exposure interval: 2 rows ¬ built-in temperature sensor ¬ temperature range: - operating: -30°C to +85°C junction temperature - stable image: 0°C to +60°C junction temperature ¬ programmable I/O drive capability ¬ output formats: 10-bit RGB RAW ¬ lens size: 1/2.3" ¬ maximum exposure interval: (VTS-8) rows ¬ pixel size: 1.116 µm x 1.116 µm ¬ image area: 6321 µm x 4749.7 µm ¬ die dimensions: - COB: 7399.8 µm x 5599.8 µm - RW: 7449.8 µm x 5649.8 µm ¬ lens chief ray angle: 34.52° non-linear Functional Block Diagram OV23850 image array 12-bit ADC AMP temperature sensor ISP row select column sample/hold image output interface MIPI/LVDS image sensor processor FIFO image sensor core MCP/N[1:0] MDP/N[7:0] gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, October, 2015 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SDA SCL SCCB interface SID STROBE GPIO[4:0] HREF ILPWM FREX VSYNC FSIN TM XSHUTDN timing generator and system control logic PWDNB PLL EXTCLK PLLs OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and VarioPixel are registered trademarks of OmniVision Technologies, Inc. PureCel and OmniBSI are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.