SQ4284EY www.vishay.com Vishay Siliconix Automotive Dual N-Channel 40 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY VDS (V) • • • • 40 RDS(on) () at VGS = 10 V 0.0135 RDS(on) () at VGS = 4.5 V 0.0148 ID (A) 8 Configuration Dual D1 SO-8 S1 1 8 D1 G1 2 7 D1 S2 3 6 D2 G1 G2 4 5 D2 TrenchFET® Power MOSFET AEC-Q101 Qualified 100 % Rg and UIS Tested Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 D2 G2 S1 S2 N-Channel MOSFET N-Channel MOSFET Top View ORDERING INFORMATION Package SO-8 Lead (Pb)-free and Halogen-free SQ4284EY-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 40 Gate-Source Voltage VGS ± 20 Continuous Drain Current TC = 25 °Ca TC = 125 °C Continuous Source Current (Diode Conduction) Pulsed Drain Currenta Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipationa L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range ID V 8 7.4 IS 3.5 IDM 32 IAS 48 EAS 115 PD UNIT 3.9 1.3 A mJ W TJ, Tstg - 55 to + 175 °C SYMBOL LIMIT UNIT RthJA 120 RthJF 38 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Foot (Drain) PCB Mountb °C/W Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. When mounted on 1" square PCB (FR-4 material). S13-0873-Rev. D, 22-Apr-13 Document Number: 67334 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4284EY www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS VGS = 0 V, ID = 250 μA 40 - - VGS(th) VDS = VGS, ID = 250 μA 1.5 2.0 2.5 Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 20 V - - ± 100 VGS = 0 V VDS = 40 V - - 1 Zero Gate Voltage Drain Current IDSS VGS = 0 V VDS = 40 V, TJ = 125 °C - - 50 VGS = 0 V VDS = 40 V, TJ = 175 °C - - 150 On-State Drain Currenta ID(on) VGS = 10 V VDS5 V 25 - - VGS = 10 V ID = 7 A - 0.0112 0.0135 VGS = 10 V ID = 7 A, TJ = 125 °C - - 0.0198 VGS = 10 V ID = 7 A, TJ = 175 °C - - 0.0235 VGS = 4.5 V ID = 5 A - 0.0123 0.0148 - 30 - - 1760 2200 - 252 315 Gate-Source Threshold Voltage Drain-Source On-State Resistancea Forward Transconductanceb RDS(on) gfs VDS = 15 V, ID = 7 A V nA μA A S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss - 93 116 Total Gate Chargec Qg - 30 45 Gate-Source Chargec Qgs - 5.5 - Gate-Drain Chargec Gate Resistance Turn-On Delay Timec Rise Timec Turn-Off Delay Timec Fall Timec VGS = 0 V VDS = 25 V, f = 1 MHz VGS = 10 V VDS = 20 V, ID = 5 A Qgd pF nC - 5 - f = 1 MHz 2.2 4.53 6.8 td(on) - 10 15 tr VDD = 20 V, RL = 4 ID 5 A, VGEN = 10 V, Rg = 1 - 40 60 - 32 48 - 11 17 - - 32 A - 0.76 1.2 V Rg td(off) tf ns Source-Drain Diode Ratings and Characteristicsb Pulsed Currenta ISM Forward Voltage VSD IF = 7 A, VGS = 0 V Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S13-0873-Rev. D, 22-Apr-13 Document Number: 67334 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4284EY www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 30 30 VGS = 10 V thru 4 V 24 ID - Drain Current (A) ID - Drain Current (A) 24 18 VGS = 3 V 12 6 18 12 TC = 25 °C 6 TC = 125 °C 0 0 2 4 6 8 VDS - Drain-to-Source Voltage (V) 10 0 1 3 4 5 Transfer Characteristics 100 8 80 gfs - Transconductance (S) 10 6 TC = 25 °C 4 2 VGS - Gate-to-Source Voltage (V) Output Characteristics ID - Drain Current (A) TC = - 55 °C 0 2 TC = - 55 °C TC = 25 °C 60 40 TC = 125 °C 20 TC = 125 °C TC = - 55 °C 0 0 0 1 2 3 4 5 0 2 VGS - Gate-to-Source Voltage (V) 6 8 10 Transconductance 0.05 2500 0.04 2000 C - Capacitance (pF) RDS(on) - On-Resistance (Ω) Transfer Characteristics 0.03 0.02 4 ID - Drain Current (A) VGS = 4.5 V Ciss 1500 1000 500 0.01 Coss VGS = 10 V Crss 0 0.00 0 6 12 18 24 ID - Drain Current (A) On-Resistance vs. Drain Current S13-0873-Rev. D, 22-Apr-13 30 0 8 16 24 32 VDS - Drain-to-Source Voltage (V) 40 Capacitance Document Number: 67334 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4284EY www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 1.7 10 ID = 7 A VDS = 20 V 6 4 1.3 VGS = 4.5 V 1.1 0.9 2 0.7 - 50 - 25 0 0 8 16 24 32 40 100 50 75 100 125 150 175 0.05 10 0.04 TJ = 150 °C RDS(on) - On-Resistance (Ω) IS - Source Current (A) 25 On-Resistance vs. Junction Temperature Gate Charge 1 TJ = 25 °C 0.1 0.01 0.001 0.0 0 TJ - Junction Temperature (°C) Qg - Total Gate Charge (nC) 0.03 TJ = 25 °C 0.02 0.01 TJ = 150 °C 0.00 0.2 0.4 0.6 0.8 1.0 0 1.2 VSD - Source-to-Drain Voltage (V) 53 0.2 51 VDS - Drain-to-Source Voltage (V) 0.5 - 0.1 ID = 5 mA - 0.4 ID = 250 μA - 0.7 - 1.0 - 50 - 25 0 25 50 75 100 TJ - Temperature (°C) Threshold Voltage S13-0873-Rev. D, 22-Apr-13 125 150 2 4 6 8 VGS - Gate-to-Source Voltage (V) 10 On-Resistance vs. Gate-to-Source Voltage Source Drain Diode Forward Voltage VGS(th) Variance (V) VGS = 10 V 1.5 8 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) ID = 5 A 175 ID = 1 mA 49 47 45 43 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) Drain Source Breakdown vs. Junction Temperature Document Number: 67334 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4284EY www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 100 IDM Limited ID - Drain Current (A) 10 Limited by RDS(on)* 1 ms ID Limited 10 ms 1 100 ms 0.1 TC = 25 °C Single Pulse 0.01 0.01 BVDSS Limited 1s 10 s, DC 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 110 °C/W 0.02 3. T JM - TA = PDMZthJA(t) 0.01 10 -4 4. Surface Mounted Single Pulse 10 -3 10 -2 10 -1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient S13-0873-Rev. D, 22-Apr-13 Document Number: 67334 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ4284EY www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Duty Cycle = 0.5 Normalized Effective Transient Thermal Impedance 1 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 10 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67334. S13-0873-Rev. D, 22-Apr-13 Document Number: 67334 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix SO-8 Ordering codes for the SQ rugged series power MOSFETs in the SO-8 package: OLD ORDERING CODE a NEW ORDERING CODE SQ4005EY - SQ4005EY-T1_GE3 SQ4050EY SQ4050EY-T1-GE3 SQ4050EY-T1_GE3 SQ4182EY SQ4182EY-T1-GE3 SQ4182EY-T1_GE3 SQ4184EY SQ4184EY-T1-GE3 SQ4184EY-T1_GE3 SQ4282EY SQ4282EY-T1-GE3 SQ4282EY-T1_GE3 SQ4284EY SQ4284EY-T1-GE3 SQ4284EY-T1_GE3 SQ4401EY SQ4401EY-T1-GE3 SQ4401EY-T1_GE3 SQ4410EY SQ4410EY-T1-GE3 SQ4410EY-T1_GE3 SQ4425EY SQ4425EY-T1-GE3 SQ4425EY-T1_GE3 SQ4431EY SQ4431EY-T1-GE3 SQ4431EY-T1_GE3 SQ4435EY SQ4435EY-T1-GE3 SQ4435EY-T1_GE3 DATASHEET PART NUMBER SQ4470EY SQ4470EY-T1-GE3 SQ4470EY-T1_GE3 SQ4483BEEY SQ4483BEEY-T1-GE3 SQ4483BEEY-T1_GE3 SQ4483EY - SQ4483EY-T1_GE3 SQ4532AEY - SQ4532AEY-T1_GE3 SQ4840EY SQ4840EY-T1-GE3 SQ4840EY-T1_GE3 SQ4850EY SQ4850EY-T1-GE3 SQ4850EY-T1_GE3 SQ4917EY SQ4917EY-T1-GE3 SQ4917EY-T1_GE3 SQ4920EY SQ4920EY-T1-GE3 SQ4920EY-T1_GE3 SQ4937EY SQ4937EY-T1-GE3 SQ4937EY-T1_GE3 SQ4940AEY SQ4940AEY-T1-GE3 SQ4940AEY-T1_GE3 SQ4946AEY SQ4946AEY-T1-GE3 SQ4946AEY-T1_GE3 SQ4949EY SQ4949EY-T1-GE3 SQ4949EY-T1_GE3 SQ4961EY SQ4961EY-T1-GE3 SQ4961EY-T1_GE3 SQ9407EY SQ9407EY-T1-GE3 SQ9407EY-T1_GE3 SQ9945BEY SQ9945BEY-T1-GE3 SQ9945BEY-T1_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 21-Oct-15 Document Number: 66624 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix SOIC (NARROW): 8-LEAD JEDEC Part Number: MS-012 8 6 7 5 E 1 3 2 H 4 S h x 45 D C 0.25 mm (Gage Plane) A e B All Leads q A1 L 0.004" MILLIMETERS INCHES DIM Min Max Min Max A 1.35 1.75 0.053 0.069 A1 0.10 0.20 0.004 0.008 B 0.35 0.51 0.014 0.020 C 0.19 0.25 0.0075 0.010 D 4.80 5.00 0.189 0.196 E 3.80 4.00 0.150 e 0.101 mm 1.27 BSC 0.157 0.050 BSC H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.50 0.93 0.020 0.037 q 0° 8° 0° 8° S 0.44 0.64 0.018 0.026 ECN: C-06527-Rev. I, 11-Sep-06 DWG: 5498 Document Number: 71192 11-Sep-06 www.vishay.com 1 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR SO-8 0.172 (4.369) 0.028 0.022 0.050 (0.559) (1.270) 0.152 (3.861) 0.047 (1.194) 0.246 (6.248) (0.711) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 22 Document Number: 72606 Revision: 21-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000