SQJQ402E www.vishay.com Vishay Siliconix Automotive N-Channel 40 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY VDS (V) • TrenchFET® power MOSFET 40 RDS(on) (Ω) at VGS = 10 V 0.0017 • AEC-Q101 qualified RDS(on) (Ω) at VGS = 4.5 V 0.0020 • 100 % Rg and UIS tested ID (A) • Thin 1.9 mm height 200 Configuration • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Single PowerPAK® 8x8L Single 1.9 mm 8.1 mm D D D 8 mm G 1 G S 2 S 3 S 4 Top View S 4 S 3 S 2 1 G S Bottom View N-Channel MOSFET ORDERING INFORMATION Package PowerPAK 8x8L Lead (Pb)-free and Halogen-free SQJQ402E-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER Drain-Source Voltage SYMBOL VDS LIMIT 40 Gate-Source Voltage VGS ± 20 Continuous Drain Current TC = 25 °C a TC = 125 °C Continuous Source Current (Diode Conduction) Pulsed Drain Current b Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range ID 127 IS 200 300 IAS 85 EAS 361 TJ, Tstg Soldering Recommendations (Peak Temperature) d, e V 200 IDM PD UNIT 150 50 -55 to +175 260 A mJ W °C THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Case (Drain) PCB Mount c SYMBOL LIMIT RthJA 50 RthJC 1 UNIT °C/W Notes a. Package limited. b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. c. When mounted on 1" square Pcb (Fr4 material). d. See solder profile (www.vishay.com/doc?73257). The PowerPAK 8x8L is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components. S14-2246-Rev. A, 10-Nov-14 Document Number: 62748 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJQ402E www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. VDS VGS = 0, ID = 250 μA 40 - - VGS(th) VDS = VGS, ID = 250 μA 1.5 2 2.5 VDS = 0 V, VGS = ± 20 V UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Current a Drain-Source On-State Resistance a Forward Transconductance b IGSS IDSS - ± 100 VDS = 40 V - - 1 VGS = 0 V VDS = 40 V, TJ = 125 °C - - 50 VGS = 0 V VDS = 40 V, TJ = 175 °C - - 150 VGS = 10 V VDS ≥ 5 V 100 - - VGS = 10 V ID = 20 A - 0.0013 0.0017 VGS = 4.5 V ID = 10 A - 0.0015 0.0020 VGS = 10 V ID = 20 A, TJ = 125 °C - - 0.0026 VGS = 10 V ID = 20 A, TJ = 175 °C ID(on) RDS(on) - VGS = 0 V gfs VDS = 15 V, ID = 20 A - - 0.0031 - 140 - V nA μA A Ω S Dynamic b Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Total Gate Charge c Gate-Source Charge c Gate-Drain Charge c Gate Resistance Turn-On Delay Time c Rise Time c Turn-Off Delay Time c Fall Time c - 10 760 13 500 - 1370 1800 Crss - 650 850 Qg - 169 260 - 32 - - 29 - 0.6 1.3 2.5 - 19 30 Qgs VGS = 0 V VDS = 20 V, f = 1 MHz VGS = 10 V VDS = 20 V, ID = 40 A Qgd Rg f = 1 MHz td(on) tr td(off) VDD = 20 V, RL = 0.5 Ω ID ≅ 40 A, VGEN = 10 V, Rg = 1 Ω tf pF nC Ω - 15 25 - 69 110 - 11 20 - - 300 A - 0.82 1.2 V ns Source-Drain Diode Ratings and Characteristics b Pulsed Current a ISM Forward Voltage VSD IF = 50 A, VGS = 0 Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S14-2246-Rev. A, 10-Nov-14 Document Number: 62748 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJQ402E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 250 16 000 VGS = 10 V thru 4 V 12 800 C - Capacitance (pF) ID - Drain Current (A) 200 150 100 VGS = 3 V 50 Ciss 9600 6400 3200 Coss Crss 0 0 0 3 6 9 12 VDS - Drain-to-Source Voltage (V) 0 15 8 16 24 32 VDS - Drain-to-Source Voltage (V) Capacitance 160 10 128 8 VGS - Gate-to-Source Voltage (V) ID - Drain Current (A) Output Characteristics 96 TC = 25 °C 64 TC = 125 °C 32 TC = -55 °C ID = 40 A VDS = 20 V 6 4 2 0 0 0 2 4 6 8 VGS - Gate-to-Source Voltage (V) 0 10 40 200 2.0 RDS(on) - On-Resistance (Normalized) 0.0050 0.0040 0.0030 0.0020 VGS = 4.5 V 0.0010 0.0000 0 80 120 160 Qg - Total Gate Charge (nC) Gate Charge Transfer Characteristics RDS(on) - On-Resistance (Ω) 40 VGS = 10 V 20 40 60 ID - Drain Current (A) 80 On-Resistance vs. Drain Current S14-2246-Rev. A, 10-Nov-14 100 ID = 20 A 1.7 VGS = 10 V 1.4 VGS = 4.5 V 1.1 0.8 0.5 - 50 - 25 0 25 50 75 100 125 TJ - Junction Temperature (°C) 150 175 On-Resistance vs. Junction Temperature Document Number: 62748 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJQ402E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 52 VDS - Drain-to-Source Voltage (V) 100 IS - Source Current (A) 10 TJ = 150 °C 1 TJ = 25 °C 0.1 0.01 0.001 ID = 1 mA 48 46 44 42 0.0 0.2 0.4 0.6 0.8 1.0 VSD - Source-to-Drain Voltage (V) 1.2 - 50 - 25 0 25 50 75 100 125 TJ - Junction Temperature (°C) 150 175 Drain Source Breakdown vs. Junction Temperature Source Drain Diode Forward Voltage 1000 0.010 IDM Limited 100 ID - Drain Current (A) 0.008 RDS(on) - On-Resistance (Ω) 50 0.006 0.004 TJ = 125 °C TJ = 25 °C 0.000 0 10 2 4 6 8 VGS - Gate-to-Source Voltage (V) 10 On-Resistance vs. Gate-to-Source Voltage 1 ms 10 ms, 100 ms, 1 s,10 s, DC 1 0.1 0.002 100 μs ID Limited 0.01 0.01 Limited by RDS(on)* BVDSS Limited TC = 25 °C Single Pulse 0.1 1 10 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 100 Safe Operating Area 0.6 VGS(th) Variance (V) 0.2 -0.2 ID = 5 mA -0.6 ID = 250 μA -1.0 -1.4 -50 -25 0 25 50 75 100 TJ - Temperature (°C) 125 150 175 Threshold Voltage S14-2246-Rev. A, 10-Nov-14 Document Number: 62748 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQJQ402E www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 10 100 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?62748. S14-2246-Rev. A, 10-Nov-14 Document Number: 62748 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix PowerPAK® 8 x 8L Ordering codes for the SQ rugged series power MOSFETs in the PowerPAK 8 x 8L package: DATASHEET PART NUMBER OLD ORDERING CODE a NEW ORDERING CODE SQJQ402E SQJQ402E-T1-GE3 SQJQ402E-T1_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 25-Aug-15 Document Number: 67144 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK® 8 x 8L Case Outline W1 b2 E1 E W E2 E3 W3 W2 D2 θ L A1 e θ1 0.25 gauge line Bottom view (single) D3 K D3 E1 E E2 E3 W3 W2 W1 b2 K A Top view (single) C D1 D A3 b1 F b L1 D4 D4 b b1 D1 D e Bottom view (dual) Top view (dual) DIM. MILLIMETERS INCHES A A1 A3 b b1 b2 c D D1 D2 D3 D4 MIN. 1.70 0.00 0.55 0.92 1.02 7.80 0.20 8.00 7.80 6.70 2.85 6.11 NOM. 1.80 0.08 0.62 1.00 1.10 7.90 0.25 8.10 7.90 6.80 2.95 6.21 MAX. 1.90 0.13 0.70 1.08 1.18 8.00 0.30 8.25 8.00 6.90 3.05 6.31 MIN. 0.067 0.000 0.022 0.036 0.040 0.307 0.008 0.315 0.307 0.264 0.112 0.241 NOM. 0.071 0.003 0.024 0.039 0.043 0.311 0.010 0.319 0.311 0.268 0.116 0.244 MAX. 0.075 0.005 0.028 0.043 0.046 0.315 0.012 0.325 0.315 0.272 0.120 0.248 e 1.95 7.90 6.12 3.94 4.69 0.05 0.62 0.92 0.80 0.30 0.30 4.39 4.54 6° 0° 2.00 8.00 6.22 4.04 4.79 0.10 0.72 1.07 0.90 0.40 0.40 4.49 4.64 10° 3° 2.05 8.10 6.32 4.14 4.89 0.15 0.82 1.22 1.00 0.50 0.50 4.59 4.74 14° 8° 0.077 E E1 E2 E3 F L L1 K W W1 W2 W3 θ θ1 0.079 0.315 0.245 0.159 0.189 0.004 0.028 0.042 0.035 0.016 0.016 0.177 0.183 10° 3° 0.081 0.319 0.249 0.163 0.193 0.006 0.032 0.048 0.039 0.020 0.020 0.181 0.187 14° 8° 0.311 0.241 0.140 0.185 0.002 0.024 0.036 0.031 0.012 0.012 0.173 0.179 6° 0° C14-0891-Rev. A, 06-Oct-14 DWG: 6026 Revision: 06-Oct-14 Document Number: 67734 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern www.vishay.com Vishay Siliconix Recommended Minimum PADs for PowerPAK® 8 x 8L Single 8.00 (0.31) 0.50 (0.02) 4.05 (0.16) 3.55 (0.14) Y 3.99 (0.16) 4.59 (0.18) 6.90 (0.27) (0, 0) 0.44 (0.02) X 0.54 (0.02) 0.85 (0.03) 6.11 (0.24) 1.29 (0.05) 1.94 (0.08) 8.25 (0.32) 3.23 (0.13) 0.82 (0.03) 2.47 (0.10) 3.62 (0.14) 4.05 (0.16) 2.03 (0.08) 1.15 (0.05) 0.88 (0.03) Dimensions in millimeters (inches) Note • Linear dimensions are in black, the same information is provided in ordinate dimensions which are in blue. Revision: 08-Apr-15 1 Document Number: 67477 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000