ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Fanning Strip System • Holds wires in a specific orientation • No sharp edges to damage wire insulation • Will accept wires up to 18 AWG • Fanning strip can remain as part of completed harness .53 (13.5) B2. Cable Accessories .04 (1.0) .16 (4.0) .62 (15.7) .31 (7.9) .06 (1.5) 1.42 (36.0) .04 (1.0) 6.00 (152.4) .12 (3.0) B3. Stainless Steel Ties 1.50 .75 (38.1) (19.0) 12.1 (307.8) FS156 FSH40 Part Number FS156-C FSH40-X FSHH Material Nylon 6.6 Color Natural ABS Black FSHH-X .60 (15.2) 1.10 (28.0) 3.2 (81.3) .56 (14.2) C1. Wiring Duct C2. Surface Raceway .04 (1.0) Mounting Method FSH Holder Four #8 (M4) Screws Two #8 (M4) Screws Std. Std. Pkg. Ctn. Qty. Qty. 100 1000 10 100 10 100 C3. Abrasion Protection C4. Cable Management Spring Wire Breakout System • Harness board spring and spring holder holds wire ends secure while harness is being fabricated • Wires simply pull out from spring when harness is removed • Each SHH Spring Holder is supplied with one rigid wire piece to hold the spring laterally and two #8 (M4), 2" (50.8mm) hex head wood screws; purchase spring separately D1. Terminals .19 (4.8) Dia. .53 (13.4) .44 (11.2) D2. Power Connectors E2. Labels 1.30 (33.0) PBSC D3. Grounding Connectors E1. Labeling Systems A A SHH Part Number PBSC1-X PBSC3-X Hole Spacing A In. mm 1.00 25.4 3.00 76.2 PBSC6-X PBSC12-X SHH1-S8-X SHH3-S8-X 6.00 12.00 1.85 6.80 152.4 304.8 47.0 172.7 Material Steel Nylon 6.6 Color — — — — Natural Mounting Method SHH1 Spring Holder Two #8 (M4) Screws Std. Pkg. Qty. 10 10 Std. Ctn. Qty. 100 100 SHH3 Spring Holder Two #8 (M4) Screws Two #8 (M4) Screws Two #8 (M4) Screws 10 10 10 10 100 100 100 100 E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.