High-side Power Switch ICs [Surface-mount, current monitor output function] SPF5018 External Dimensions (unit: mm) Features ● Internal current sense resistor ● High accuracy current monitor output (sample & hold function) ● Built-in overcurrent and thermal protection circuits 12.2±0.2 +0.2 Conditions VB 0 to 32 V 1 Vcc –0.5 to 7.0 V 1.27±0.25 Power supply voltage 3 VB 0 to 40 V Input terminal voltage Vsense+ –0.8 to 6 Vsense– Vsense+±Io • Rsense V VOUT –2 to 32 V –0.5 to 7.0 V VPWM 2.0 –0.8 Unit Power supply voltage 2 Output terminal voltage 9 (Ta=25ºC) Ratings Power supply voltage 1 Current sensing voltage Fin thickness 8 +0.15 0.4 –0.05 2.5±0.2 Symbol 1.0 –0.05 7.5±0.2 Absolute Maximum Ratings Parameter +0.1 10.5±0.2 16 VB terminal, t = 1 min +0.15 0.25–0.05 VHold Output current IOUT 2.0 A Power dissipation PD 2.0 W Storage temperature Tstg –40 to +150 °C Channel temperature Tch 150 °C Block Diagram (for one channel) Vcc Depends on surface-mount board pattern 2 VB 11 clamp Electrical Characteristics D Charge Pump OSC TSD (VB=14V, Ta=25ºC unless otherwise specified) S Sense MOS OCP OUT 14 PWM 3 Parameter Symbol 70kΩ Ratings min typ Sense+ max Unit 13 CMOS Logic Conditions Hold lamp 4 70kΩ Min. operating power supply voltage Operating power supply voltage 1 VB min VB Operating power supply voltage 2 VCC Quiescent circuit current 1 Iqvb Quiescent circuit current 2 PWM terminal input voltage 10 14 Hold terminal input voltage Output ON resistance Current sensing resistance 70 Vcc = 5V, VPWM = 0V 0.2 mA Vcc = 5V, VPWM = 0V V 110 Ttsd 150 Io 0.2 µA Vcc = 5V, VPWM = 5V, Active H * 3 Ω IOUT = 1A 0.21 Ω IOUT = 1A, Ta = 125°C 0.21 Ω IOUT = 1A 0.25 Ω IOUT = 1A, Ta = 125°C A *4 A *1 Io = 0A, Vcc = 5V 0.2 V 0.500 0.512 V Io = 0.2A, Vcc = 5V 1.219 1.250 1.281 V Io = 0.5A, Vcc = 5V, Ta = –40 to 140°C 2.925 3.000 3.075 V 5 mA Io = 1A, Vcc = 5V, VSH = 0V mA Io = 1A, Vcc = 5V, VSH = 5V –6 15 µs t off 15 µs tr 100 µs tf Current monitor output delay time t shd Hold time after inputting hold t shh S/H settling time 500 3 4 6 1kΩ 0.01 µF 11 VB Sense+ Hold Sense– 50 µs 650 µs 1 µs 2 µs µs VB = 11V, Vcc = 5V, Io = 1.2A, C1 = 0.033µF 80 µs VB = 11V, Vcc = 5V, Io = 1.2A, C1 = 0.033µF, Ta = 125°C t stt D1 5.1 kΩ LG C 5 7 D2 Timing Chart Ordinary operation (auto hold) Thermal protection Ordinary operation (external hold) VPWM Icoil *1 500 to 650 usec Io = 0.5A, Vcc = 5V, 70 15 * Use a Schottky Di for D2 when the Sense+ terminal is lower than the abs. max. rated voltage (–0.8V) VS/H C1 = 0.033µF 14 13 S/H Vout Io = 0.5A, Vcc = 5V OUT SFP5018 PWM C1 Io = 1.2A, Vcc = 5V, Ta = –40 to 140°C Note: * 1: Accuracy warranty range for current monitor output * 2: Equivalent errors are not included in current monitor output accuracy. * 3: With built-in pull-down resistance (70kΩ typ) * 4: Self-excitation and oscillation type * 5: Accuracy of current monitor output is affected by the materials of the hold capacitor (C1). The capacitor C1 must be of low dielectric absorption and have good bias and leak current characteristics. 48 Controlling microcomputer CPU °C 1.2 t on t sh 2 Vcc = 5V 0.488 ISH Current monitor output hold time *3 110 Rsense Operation circuit for current monitor output Output fall time LG Standard Connection Diagram Vcc = 5V Vcc = 5V, VPWM = 5V, Active H 7 C 0.14 RDSon Thermal shutdown operating temperature Output rise time 5 VCC 70 3.0 Output transfer time *2 1.5 IHoldH VSH µA V Is Current monitor output current mA Sense– S/H 6 3.5 Overcurrent protection starting current Current monitor output voltage 7.2 V VHoldL Hold terminal input current V 15 S/H 1.5 IPWMH VHoldH 16 *1 3.5 VPWML PWM terminal input current Minimum operation of OUT terminal. 5.0 Iqvcc VPWMH V 6 Sense R + – *2 *1 500 to 650 usec VHold Truth table VPWM L H VOUT L H Overcurrent protection Ordinary operation (auto hold)