BCI-Motor BCI 52.30 – – – – – – – DC motor with ferrite permanent magnets. Mechanical commutation through 12-piece collector. Closed steel motor housing with zinc diecast bearing flanges. Operation in both directions of rotation. Service life 3.000 hrs for continuous operation (S1). Insulation class B. Protection class IP 40, optionally higher. Nominal Data Type BCI 52.30 12 V DC 24 V DC 40 V DC 60 V DC Nominal speed min-1 3600 3600 3600 3600 Nominal torque mNm 100 100 100 100 Nominal output power W 38 38 38 38 Nominal current A 4.8 2.2 1.35 1.0 Nominal efficiency approx. % 71 71 71 71 Free-running speed min 4200 4200 4200 4200 Free-running current A 0.48 0.30 0.17 0.12 Starting torque mNm 550 650 650 790 Starting current A 20.8 12.0 8.8 5.9 Rotor moment of inertia gcm2 230 230 230 230 Mass kg 0.9 0.9 0.9 0.9 931 5230 002 931 5230 001 931 5230 003 931 5230 004 -1 3, 7 (4 H1 x) 0 Order No. -0,1 2,8 ) (2x 25±0,3 52 49±0,1 36 ø25 _ 0,04 ø25 _ 0,04 FA 45° 49 ±0,1 36 32 ø19,05 ø6 g5 95±0,5 FR ø (4 2,3 x) H 2 ±0,1 22,5° 2 ±0,1 45° 10 [min-1] Motor curves for 24 V A 4000 8,0 n = f (M) 3000 6,0 2000 4,0 Max. permissible shaft load FA – axial load 90 N FR – radial load 130 N, 20 mm from motor flange Blind holes for self threading screws according to DIN 7500 I = f (M) 1000 S 2,0 0 S 6 50 100 150 200 250 mNm Electrical connection Direction of rotation, clockwise as viewed onto the drive shaft Cable length 300 ± 30 from motor Cable length 7 ± 2 stripped and tin-coated 3,7 H10 (4x ) (7 deep)