download document

OVP7200/OVP921 LCOS product brief
lead free
available in
a lead-free
package
720p HD LCOS Chip Set Solution
for Compact Projection Systems
The OVP7200/OVP921liquid crystal on silicon (LCOS)
chip set brings high definition (HD) image resolution to
very small projection systems. The OVP7200 panel has a
resolution of 1280 x 720 pixels and a diagonal
measurement of 0.37-inch, making it ideal for low cost
HD projection systems. The companion driver ASIC, the
OVP921, integrates a host of features that simplify
system design, while saving both space and power.
The OVP7200 is a single panel, color field sequential
device, based on a 6.4-micron pixel in an array with a
native resolution of 1280 x 720 pixels. The OVP7200
uses all-digital technology to drive the liquid crystal,
resulting in stable, reproducible image quality.
The OVP921 provides enhanced system performance
without the need for an external image processor. The
OVP921 has built-in keystone correction, frame rate
conversion, video input scaling, LED controller, and an
embedded 8051 microcontroller (MCU). Additionally, the
OVP921 can accept inputs via 24-bit RGB, MIPI or USB.
The OVP7200 is large enough to couple well with LED
light sources, yet is small enough to meet the demands of
compact projection systems for mobile and automotive
applications. The HD resolution of OVP7200/OVP921
combined with solid state light sources allows customers
to create low-cost, compact projection systems with high
optical output.
Find out more at www.ovt.com.
OVP7200/OVP921
Applications
¬ Companion projector
¬ Head up display
¬ Head mounted display
¬ Embedded projector
Ordering Information
OVP921 Product Specifications
¬ no external memory required
¬ support for 3 types of video input
- USB (slave only)
- MIPI (2 channel Rx)
- 24 bit RGB
¬ support for input resolutions
- 320 x 240, 640 x 480, 800 x 600
- 848 x 600,848 x 480
- 1280 x 720
¬ built-in scaler functionality
- 1 to 5x upscale
- 1 to 0.5x downscale
¬ LCOS Panel: OVP7200-MBAA-TA
(lead-free, 41-pin PCB)
¬ Driver ASIC: OVP0921-B44G
(lead-free, 144-pin BGA)
¬ keystone correction
- up to +/- 15°
¬ LED control
- enable/disable + PWM dimming
¬ embedded 8051 MCU
¬ serial camera control bus (SCCB)
- for register programming
- support for either all 3.3V I/O or
1.8V I/O
¬ designed for low power consumption
OVP7200 Product Specifications
¬ active array size: 1280 x 720
¬ aperture ratio: > 92%
¬ pixel pitch: 6.4 µm
¬ package dimensions: 9 x 23.4 x 3.2 mm
¬ array diagonal: 0.37”
¬ temperature range:
- operating: 10°C to 70°C
- storage: -20°C to 100°C
¬ integrated optical mask
¬ package dimensions:
- 144-pin BGA: 9 x 9 mm
¬ frame rate conversion
- from 60Hz to 10Hz input
Functional Block Diagram
USB CLK
USB data
MIPI
DSI
R[7:0]
G[7:0]
B[7:0]
SIOC
SIOD
USB
MIPI
DSI RX
VID
8051
micro
SSCB
slave
serial
interface
flash
4275 Burton Drive
Santa Clara, CA 95054
USA
Version 1.1, January, 2013
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
video
processing
SRAM
buffer
video
post
processing
LCOS
panel
interface
DP
imager
OVP921
LED
MIPI TX
control
signals
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered
trademarks of OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision
Technologies, Inc. All other trademarks are the property of their respective owners.
OVP7200
LCOS
panel