Technical Information Metal Halide Lamp No. DO 5575 Edition: 10/08 - subject to change HMI® 6000 W/DXS Supersedes: / Status: valid Product description The OSRAM HMI® 6000 W/DXS is a double-ended metal halide lamp. The lamp is characterized by its high luminous efficacy, its daylight-like color temperature and its hot restart ability. The HMI® 6000 W/DXS is used in the SSTV field mainly for film shootings. Technical data HMI® 6000 W/DXS Order reference Rated lamp wattage W 6,000 Rated lamp voltage V 125±10 Rated lamp current (~) A 55 Ignition voltage kVS 20 / 50 (max. 60) Luminous flux lm 570,000 Luminous efficacy lm/W 95 Color temperature K 6.000 Color rendering index Ra > 90 Light arc length mm 21 Lamp length l1 mm max. 450 Bulb diameter d mm 54 Average service life h 500 Base l 1 d S 25,5 Lamp operation Maximum permissible pinch seal temperature °C 450 °C / with eXtreme Seal Technology (measured at welding point) Cooling convection Burning position horizontal ± 15°, p 15 The HMI® 6000 W/DXS can either be operated on standard ballasts or on electronic power supplies (ECG). Manufacturers of igniters and control gear (not all officially approved by ORRAM) Ignitors: Ballasts: ECGs: Bauch 907 and 916, DESISTI 2642 Power Gems EB 640P Bauch 907, DESISTI 2445 Further information on operating and control gears requirements is available with the OSRAM brochure "Guidelines for Control Gear and Igniters - Metal Halide Lamps Photo Optics", order reference 123T01E. Display/Optic Berlin