Technical Information No. DO 4304 Edition: 10/08 - Metal Halide Lamp HMI® 4000 W/SE XS subject to change Supstitutes: 08/04 Status: valid Product description The OSRAM HMI® 4000 W/SE is a single-ended metal halide lamp with outer jacket. Featuring OSRAM's eXtreme-Seal Technology, the lamp stands pinch temperatures up to 450°C now. This lamp type is mainly used in film and TV lighting, for stage, show and industrial solar simulation. d Technical data HMI® 4000 W/SE XS Order reference Rated lamp wattage W 4000 Rated lamp voltage V 190 ± 10 Rated lamp current (~) A 25 Ignition voltage (cold, kHz-ign.) kVS 5 Ignition voltage (cold/hot, MHz-ign.) kVS 20 / 50...60 Luminous flux lm 380,000 Luminous efficacy lm/ 95 Color temperature K 6,000 Color rendering index Ra > 90 Electrode gap e mm 23,5 Lamp length (overall) l1 mm max. 250 Bulb diameter d mm max. 75 LCL a mm 142 Average service life h 500 Base l1 a G38 Lamp operation Maximum pinch seal temperature allowed °C 450 / with eXtreme Seal Technology (measured at welding point) Cooling Convection Burning position any The HMI® 4000 W/SE can either be operated on standard ballasts or on electronic power supplies (ECG). Manufacturers of igniters and control gear (not all officially approved by OSRAM) Ignitors: I.R.E.M. AD-3065, sAD-3065; Bauch 276, 940 Ballasts: ARRI 4000 CB, 4000 CB DMX; I.R.E.M. BC-4000; LTM 501 701; Lumo UB 4 KW, 510-054; May & Christe 1105.1250.005, 1105.2305.003; RDS BU-4000 EP; Strand 65 209 750 ECGs: ARRI 2.5/4kW EB, 2.5/4kW EB DMX, ; B&S EB 4000C; DE SISTI DEB 4000; I.R.E.M. EB-4000, sEB-4000; LTM 501 530; Sansha SG-4000, Super 4KW; Strand 65 209 760; Lightmaker T.L. 4000 Further information on operating and control gear requirements is available with the OSRAM brochure "Guidelines for Control Gear and Igniters - Metal Halide Lamps Photo Optics", order reference 123T01E. Display/Optic Berlin