Aluminum Electrolytic Capacitors/TB Surface Mount Type Series: TB n Features Country of Origin V Type : Endurance : 125°C 500 to 1000 h For use near car engines. Good for electronically controlled units (ECU, ABS etc). 125°C guarantee. Low temp. Characteristic stability type. Vibration-proof product is available upon request.(φ8 < =) RoHS directive compliant(Parts No:EEE∗) Japan Low temp. stability TB ↑ TA n Specifications Category temp. range -40 to +125°C Rated W.V. Range 10 to 50 V .DC 10 to 330 µ F ±20 % (120Hz/+20°C) I < 0.01 CV or 3(µ A) after 2 minutes (Whichever is greater) Please see the attached standard products list Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ W.V. (V) -25 / +20 °C -40 / +20 °C Characteristics at Low Temperature 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 (Impedance ratio at 120 Hz) After applying rated working voltage for 500 hours (φ 8) and for 1000 hours (φ10) at +125 ±2°C and then being stabilized at +20°C, capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current ±30 % of initial measured value < 300 % of initial specified value < initial specified value After storage for 250 hours (φ 8) and for 500 hours (φ10) at +125±2°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the following limits. (With voltage treatment) Shelf Life Capacitance change ±30 % of initial measured value tan δ < 300 % of initial specified value DC leakage current < initial specified value After reflow soldering and then stabilized at +20°C, capacitor shall meet the following limits. Resistance to Soldering Heat Capacitance change tan δ DC leakage current n Marking ±10 % of initial measured value < Initial specified value < initial specified value n Dimensions in mm (not to scale) K Series identification C TB W.V. code Code 10 16 25 35 50 A C E V (P) B±0.2 w L ±0.3 (mm) Size L A,B H I W P K code D E 8.0 6.2 8.3 9.5 MAX 3.4 0.65±0.1 2.2 0.35 -0.20 to +0.15 F 8.0 10.2 8.3 10.0MAX 3.4 0.90±0.2 3.1 0.70 ±0.2 G 10.0 10.2 10.3 12.0MAX 3.5 0.90±0.2 4.6 0.70 ±0.2 Lot number V H Capacitance (µF) 100 Negative polarity marking φD±0.5 W.V. code (I) ( ) reference size A±0.2 0.3 max (I) Example: 16V 100 µF (Polarized) H n Case size W.V.(V) Cap. (µF) 10 22 33 47 100 220 330 10 (1A) E F G 16 (1C) F G 25 (1E) E F 35 (1V) E F G 50 (1H) E E F G Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Apr. 2005 EE50 Aluminum Electrolytic Capacitors/TB n Standard Products W.V. Cap. (±20%) 16 25 35 50 Min. Packaging Q’ty Reflow 10 Part No. (RoHS: compliant) Part No. (RoHS: not compliant) Specification EndurDia. Length S i z e Ripple tan δ ance Code current (100kHz) (120Hz) (+125°C) (+20°C) (hours) (mm) (mm) (m A ) Taping 100 8 6.2 E 100 0.30 500 EEVTB1A101P (2) EEETB1A101P (5) 1000 220 8 10.2 F 197 0.30 500 EEVTB1A221P (2) EEETB1A221P (5) 500 330 10 10.2 G 270 0.30 1000 EEVTB1A331P (2) EEETB1A331P (5) 500 100 8 10.2 F 156 0.23 500 EEVTB1C101P (2) EEETB1C101P (5) 500 220 10 10.2 G 248 0.23 1000 EEVTB1C221P (2) EEETB1C221P (5) 500 47 8 6.2 E 90 0.18 500 EEVTB1E470P (2) EEETB1E470P (5) 1000 100 8 10.2 F 148 0.18 500 EEVTB1E101P (2) EEETB1E101P (5) 500 33 8 6.2 E 85 0.16 500 EEVTB1V330P (2) EEETB1V330P (5) 1000 47 8 10.2 F 140 0.16 500 EEVTB1V470P (2) EEETB1V470P (5) 500 100 10 10.2 G 223 0.16 1000 EEVTB1V101P (2) EEETB1V101P (5) 500 10 8 6.2 E 40 0.14 500 EEVTB1H100P (2) EEETB1H100P (5) 1000 22 8 6.2 E 80 0.14 500 EEVTB1H220P (2) EEETB1H220P (5) 1000 33 8 10.2 F 133 0.14 500 EEVTB1H330P (2) EEETB1H330P (5) 500 EEETB1H470P (5) 500 (µF) 47 10 10.2 G 221 0.14 1000 Reflow (V) Case size EEVTB1H470P (2) (pcs) The taping dimensions are explained on p.187 of our Catalog. Please use it as a reference guide. Reflow Profile(Fig-1 to Fig-5) listed on the last page. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Apr. 2005 EE51 Pre-fix Suffix Case Diameter ECE-V RoHS Terminal Compliant Finish Reflow Condition Peak Temperature Time above 200℃ Reflow Chart R 3mm to 5mm No Sn-Pb 240℃ for 5 seconds 20 seconds (1) Fig.1 P 6mm No Sn-Pb 240℃ for 5 seconds 20 seconds (1) Fig.1 P 8mm to 10mm No Sn-Pb 230℃ for 5 seconds 20 seconds (2) Fig.2 R 4mm to 5mm No Sn-Pb 240℃ for 5 seconds 20 seconds (1) Fig.1 P 6mm No Sn-Pb 240℃ for 5 seconds 20 seconds (1) Fig.1 P 8mm to 10mm No Sn-Pb 230℃ for 5 seconds 20 seconds (2) Fig.2 Q 12.5mm Yes Sn 230℃ for 5 seconds 20 seconds EEV- (2) Fig.2 (Except for EB series) (3) Fig.3 (EB series only) (2) Fig.2 (Except for EB series) M 16mm to 18mm Yes Sn 230℃ for 5 seconds 20 seconds (3) Fig.3 (EB series only) EEE- R 3mm to 5mm Yes Sn-Bi 250℃ for 5 seconds 60 seconds (4) Fig.4 P 6mm Yes Sn-Bi 250℃ for 5 seconds 60 seconds (4) Fig.4 P 8mm to 10mm Yes Sn-Bi 235℃ for 5 seconds 60 seconds (5) Fig.5 (1) (2) Fig. 1 Fig. 2 260 Peak temperature / deg.C Peak temperature / deg.C 260 250 240 230 220 210 200 250 240 230 220 210 200 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 Time in 200deg.C or more / s Time in 200deg.C or more / s (3) (4) Fig. 3 Fig. 4 260 Peak temperature / deg.C Peak temperature / deg.C 260 250 240 230 220 210 200 10 20 30 40 50 60 70 230 220 210 (5) Fig. 5 260 250 240 230 220 210 200 10 20 30 40 50 Time in 200deg.C or more / s 0 10 20 30 40 50 Time in 200deg.C or more / s Time in 200deg.C or more / s Peak temperature / deg.C 240 200 0 0 250 60 70 60 70