Aluminum Electrolytic Capacitors/ HD Surface Mount Type Series: HD V Type: ※6.3V to 35V : High temperature Lead-Free reflow (suffix:A✽) 50V to 100V : Standard Lead-Free reflow ■ Features ● Endurance: 105 °C 5000 h ● Vibration-proof product is available upon request. (φ8 mm and larger) ● RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +105 °C Rated W.V. Range 6.3 V.DC to 100 V.DC Nominal Cap. Range 0.47 µF to 1000 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) DC Leakage Current tan δ Please see the attached High temperature lead-free reflow products list. Characteristics at Low Temperature W.V. (V) 6.3 10 16 25 35 50 63 100 Z(–25 °C)/Z(+20 °C) 3 3 2 2 2 2 2 2 Z(–40 °C)/Z(+20 °C) 4 4 3 3 3 3 3 3 (Impedance ratio at 120 Hz) After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Endurance ±30 % of initial measured value tan δ < 300 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Soldering Heat Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) 50, 60 0.70 Correction factor 1k 1.30 10 k to 1.70 ■ Dimensions in mm (not to scale) 0.3 max. W Pressure Relief (φ10 and larger) Lot number H J 2A + L (I) Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (P) B±0.2 H φD±0.5 Capacitance (µF) Rated Voltage Mark j 6.3 V A 10 V C 16 V E 25 V V 35 V A±0.2 – Negative polarity marking (–) 330 j HD (Unit : mm) 50 V 63 V 100 V Size D code B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 L 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 6.2±0.3 10.2±0.3 10.2±0.3 A, B H 4.3 5.5 max. 5.3 6.5 max. 6.6 7.8 max. 6.6 7.8 max. 8.3 9.5 max. 8.3 10.0 max. 10.3 12.0 max. ( ) Reference size I 1.8 2.2 2.6 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-29 – (I) Example: 6.3 V 330 µF Marking color: BLACK K ■ Marking 120 1.00 P 1.0 1.5 1.8 1.8 2.2 3.1 4.6 K + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 + 0.15 - 0.20 0.35 0.35 0.35 0.35 0.35 0.70±0.20 0.70±0.20 00 Nov. 2012 Aluminum Electrolytic Capacitors/ HD ■ High temperature Lead-Free reflow Products(6.3V to 35V) Case size W.V. (V) 6.3 10 16 25 35 Cap. (±20 %) (µF) 330 1000 100 220 330 10 22 47 100 220 470 4.7 10 22 33 47 100 330 4.7 10 22 33 47 100 220 Dia. Length (mm) 8.0 10.0 8.0 8.0 10.0 4.0 5.0 6.3 8.0 10.0 10.0 4.0 5.0 6.3 6.3 8.0 8.0 10.0 4.0 5.0 6.3 8.0 6.3 6.3 8.0 10.0 10.0 (mm) 10.2 10.2 6.2 10.2 10.2 5.8 5.8 5.8 10.2 10.2 10.2 5.8 5.8 5.8 5.8 6.2 10.2 10.2 5.8 5.8 5.8 6.2 7.7 7.7 10.2 10.2 10.2 Size Code F G E F G B C D F G G B C D D E F G B C D E D8 D8 F G G Case size (V) 50 63 100 Cap. (±20 %) (µF) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 10 22 33 3.3 4.7 10 22 Dia. Length (mm) 4.0 4.0 4.0 4.0 5.0 6.3 8.0 8.0 10.0 10.0 8.0 8.0 10.0 8.0 8.0 8.0 10.0 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 6.2 10.2 10.2 10.2 6.2 10.2 10.2 6.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification tan δ Ripple Impedance Part No. Current Reflow (100 kHz) (RoHS:compliant) (120 Hz) (120 Hz) (+20 °C) (+20 °C) (+105°C) (mA r.m.s.) EEEHD0J331AP 230 1.5 0.30 (7) EEEHD0J102AP 313 0.8 0.50 (7) EEEHD1A101AP 62 2.0 0.30 (7) EEEHD1A221AP 160 1.5 0.30 (7) EEEHD1A331AP 238 0.8 0.30 (7) EEEHD1C100AR 28 12.0 0.20 (5) EEEHD1C220AR 39 7.2 0.20 (5) EEEHD1C470AP 70 4.0 0.20 (5) EEEHD1C101AP 130 1.5 0.20 (7) EEEHD1C221AP 220 0.8 0.20 (7) EEEHD1C471AP 340 0.8 0.20 (7) EEEHD1E4R7AR 17 12.0 0.16 (5) EEEHD1E100AR 28 7.2 0.16 (5) EEEHD1E220AP 55 4.0 0.16 (5) EEEHD1E330AP 55 4.0 0.16 (5) EEEHD1E470AP 56 2.0 0.18 (7) EEEHD1E101AP 130 1.5 0.16 (7) EEEHD1E331AP 238 0.8 0.16 (7) EEEHD1V4R7AR 17 12.0 0.13 (5) EEEHD1V100AR 28 7.2 0.13 (5) EEEHD1V220AP 55 4.0 0.13 (5) EEEHD1V330AP 53 2.0 0.16 (7) EEEHDV330XAP 57 2.0 0.13 (5) EEEHDV470XAP 57 2.0 0.14 (5) EEEHD1V470AP 79 1.5 0.14 (7) EEEHD1V101AP 101 0.8 0.14 (7) EEEHD1V221AP 220 0.8 0.14 (7) ■ Standard Lead-Free reflow Products(50V to 100V) W.V. Endurance : 105 °C 5000 h B B B B C D E F G G E F G E F F G (pcs) 500 500 1000 500 500 2000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 2000 1000 1000 1000 900 900 500 500 500 Endurance : 105 °C 5000 h Specification Size Code Taping Ripple tan δ Impedance Part No. Current Reflow (100 kHz) (120 Hz) (120 Hz) (RoHS:compliant) (+20 °C) (+105°C) (+20 °C) (mA r.m.s.) EEEHD1HR47R 5 12.0 0.12 (1) EEEHD1H1R0R 7 12.0 0.12 (1) EEEHD1H2R2R 12 12.0 0.12 (1) EEEHD1H3R3R 16 12.0 0.12 (1) EEEHD1H4R7R 21 7.2 0.12 (1) EEEHD1H100P 33 4.0 0.12 (1) EEEHD1H220P 50 2.0 0.14 (2) EEEHD1H330P 74 1.5 0.14 (2) EEEHD1H470P 94 0.8 0.14 (2) EEEHD1H101P 94 0.8 0.14 (2) EEEHD1J100P 45 2.0 0.18 (2) EEEHD1J220P 65 1.5 0.18 (2) EEEHD1J330P 80 0.8 0.18 (2) EEEHD2A3R3P 30 2.0 0.18 (2) EEEHD2A4R7P 50 1.5 0.18 (2) EEEHD2A100P 55 1.5 0.18 (2) EEEHD2A220P 70 0.8 0.18 (2) Min. Packaging Q'ty Taping (pcs) 2000 2000 2000 2000 1000 1000 1000 500 500 500 1000 500 500 1000 500 500 500 If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J씮J, 1A씮A, 1C씮C, 1E씮E, 1V씮V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-30 – 00 Nov. 2012