eBOX671-885-FL-ECM Fanless EtherCAT Master Controller with LGA1150 Socket 4th Generation Intel® Core™ i7/i5/i3 & Celeron® Processors Triple independent display NEW 24VDC Power Input 8-CH Programmable Digital I/O 8-CH Isolated Digital I/O by selection Front view USB IP40 Low Power TripleView USB 3.0 TM ● LGA1150 4th generation Intel® Core i7/i5/i3 & Celeron® (Haswell and Haswell Refresh) processors with Intel® Q87 ● Fanless operation design with 4CH GbE PoE ● Two 2.5” SATA HDD drive bay, mSATA and CFast™ slot ● Two internal PCI Express Mini Card slots, 1 x SIM Card slot ● Supports HDMI, DVI-I and DisplayPort for triple independent display ● Supports RAID 0 & 1, Jumbo Frame (9.5K),WoL, PXE and Teaming 2 x RS-232/422/485 & 2 x RS-232 LGA1150 Socket Intel® Core™ i7/i5/i3 & Celeron® processor DDR3 2 x 2.5” HDD, CFast & mSATA supported 4 x PoE Gigabit LAN 6 x USB 3.0 Rear view CF CFast TM Easy processor maintenance design DDR3 ast Fanless Features EN60950 Introduction The eBOX671-885-FL-ECM EtherCAT controller is verified with IntervalZero EtherCAT Master middleware KingStar which is based on Acontis EtherCAT Master Stack and IntervalZero realtime extension RTX. With well-known Acontis EC-Master, it not only supports CoE, EoE, FoE and SoE enabling seamless integration with servo drives, but also offers Distributed Clocks function support for synchronization of all slave devices. With IntervalZero Windows real-time extension RTX that through a separate real-time scheduler transforms Windows® 7 the general-purpose operating system into a fully functional RTOS that runs on multicore hardware, delivering deterministic time control to allow Master controller and Slave device communicating cycle time of 250 s. In a practice of robotic arm, IP Camera is widely used as eye to guide robotic arm to pick up object on conveyor. The eBOX671-885-FL-ECM with 4 GbE PoE is an ideal choice. Specifications Standard Color Construction CPU System Memory Chipset BIOS System I/O Outlet 275 Silver-Black Aluminum extrusion and heavy-duty steel, IP40 4th generation Intel® Core™ i7/i5/i3 & Celeron® processors with TDP max. up to 45W 8 GB recommended Intel® Q87 AMI 1 x EtherCAT port (Intel® i210) 1 x GbE LAN port (Intel® i210) 4 x 10/100/1000Mbps Power over Ethernet, PoE - 4 ports full-load, IEEE802.3af Class 2 (7Watt) - 2 ports full-load, IEEE802.3af Class 3 (15.4Watt) - 1 ports full-load, IEEE802.3at Class 4 (30Watt) 2 x RS-232/422/485 & 2 x RS-232 8 channel programmable DI/DO (Default) 8 Isolated DI/DO (4 IN & 4 OUT) (Option) 6 x USB 3.0 2 x USB 2.0 1 x Audio (MIC_in/Line_out) 1 x DVI-I 1 x HDMI 1 x DisplayPort 1 x 24VDC Power input connector 1 x Power switch 1 x Reset switch 1 x Remote Power Switch 3 x Antenna opening Watchdog Timer Storage Expansion Interface System Indicator Power Supply Operating Temperature Storage Temperature Humidity Dimensions Weight (net/gross) Certificate 255 levels, 1 ~ 255 sec. 2 x 2.5” SATA HDD bay, max. height 9.5 mm (RAID 0 & 1 supported) 1 x CFast™ (front access) 2 x mSATA 2 x Full-size PCI Express Mini Card slot (USB+PCIe signal) 1 x SIM Card slot 1 x blue LED for system power 1 x orange LED for HDD active DC Input 24V -20°C ~ +50°C (-4°F ~ +122°F) (with W.T. SSD or CFast™, CPU TDP 35W) -40°C ~ +80°C (-40°F ~ +176°F) 10% ~ 90%, non-condensing 280 mm (11.02”) (W) x210 mm (8.27”) (D) x 76 mm (2.99”) (H) 4.31 kg (9.5 lb)/ 3.2 kg (7.05 lb) CE Verified with Software Operating System Windows Extension Test Middleware EtherCAT Master EtherCAT Configurator Windows® Embedded Standard 7 32-bit IntervalZero Windows real-time extension RTX2012 IntervalZero KingStarIO 32 bit Acontis EtherCAT Master stack 32 bit IntervalZero EtherCAT Configurator Ordering Information Standard eBOX671-885-FL-ECM-DC Fanless EtherCAT master controller embedded system with Intel® Core™ i7/i5/i3 & Celeron® processors, Intel® Q87, dual HDD, 4 PoE, 2 GbE LANs, 8 USB, audio, 4 COM, 8-CH TTL digital I/O and 24VDC Updated February 17, 2016. * All specifications and photos are subject to change without notice.