ETB9F000 Series Quick Installation Guide Appendix : Watchdog Timer I. Checklist Using the Watchdog Function ETB9F000 Board x 1 The ETB9F000 ETX Evaluation Platform Base Board is using Watchdog Timer Version 2.0, which generates either a system reset or non-maskable interrupt (NMI), depending on the JP14 jumper settings. Enable and program the function as below: Quick Installation Guide x 1 Start ↓ Un-Lock WDT Product Information CD-ROM x 1 ↓ Set multiple (1~4) ↓ Set base timer (0~F) ↓ WDT counting ↓ re-set timer ↓ IF No re-set timer ↓ IF to disable WDT : OUT 120H 0AH ; enter WDT function OUT 120H 0BH ; enable WDT function : OUT 120 0NH ; N=1,2,3 or 4 : OUT 121 0MH ; M=0,1,2,…F : OUT 121 0MH ; M=0,1,2,…F : WDT time-out, generate RESET or NMI : OUT 120 00H ; Can be disable at any time 1COM Extension Cables with Bracket, Note: Please contact your local vendors if any damaged or missing items. DO NOT apply power to the board if any damaged components. Jumper N 1 0.5 sec. 1 sec. 1.5 secs. 2 secs. 2.5 secs. 3 secs. 3.5 secs. 4 secs. 4.5 secs. 5 secs. 5.5 secs. 6 secs. 6.5 secs. 7 secs. 7.5 secs. 8 secs. 2 5 secs. 10 secs. 15 secs. 20 secs. 25 secs. 30 secs. 35 secs. 40 secs. 45 secs. 50 secs. 55 secs. 60 secs. 65 secs. 70 secs. 75 secs. 80 secs. 3 50 secs. 100 secs. 150 secs. 200 secs. 250 secs. 300 secs. 350 secs. 400 secs. 450 secs. 500 secs. 550 secs. 600 secs. 650 secs. 700 secs. 750 secs. 800 secs. Jumper Settings Before applying the power to ETB9F000 Series, please make sure all jumper settings are defaulted as the following table: 4 100 secs. 200 secs. 300 secs. 400 secs. 500 secs. 600 secs. 700 secs. 800 secs. 900 secs. 1000 secs. 1100 secs. 1200 secs. 1300 secs. 1400 secs. 1500 secs. 1600 secs. ©Copyright 2009 AXIOMTEK Co., Ltd. 4 2-pin Jumper Cap, Pitch=2.0mm x 2 II. M 0 1 2 3 4 5 6 7 8 9 A B C D E F 2-pin Jumper Cap, Pitch=2.54mm x 8 Pitch=2.54mm x 1 1 USB extension cables with bracket, Pitch=2.54mm x 1 3.5” HDD Cable x 1 M2.5*6L Ni Screw x 4 Version A1 May 2009 Printed in Taiwan 9419F000000E Default Setting Jumper Setting JP1 LINE OUT Mode Select: None Amplifier Short 1-3, 2-4 JP2 LCD Voltage select : 3.3V Short 1-2 JP4 COM1 Mode Select: RS-232 Short 1-2 JP5 COM1 Mode Select: RS-232 Short 3-5, 4-6 JP6 COM1 Mode Select: RS-232 JP7 COM1 Mode Select COM1 Pin 1: JP8 COM2 Mode Select COM2 Pin 1: DCD JP9 Clear CMOS Setting : Normal Short 3-5, 4-6 Short 3-5 DCD COM1 Pin 9: RI Short 4-6 Short 3-5 COM2 Pin 8: RI Short 4-6 JP10 Short 1-2 Compact Flash Voltage select : Short 1-2 3.3V JP11 Compact Flash Select : Slave Short 1-2 JP13 LPT/FDD Device Select : LPT Short 1-2 JP14 W atchdog Timer : RESET Short 2-3 JP15 Debug Mode Select : Port 80h Short 1-2 ©Copyright 2009AXIOMTEK Co., Ltd. Version A1 May 2009 Printed in Taiwan 9419F000000E 1 Please refer to the ETB9F000 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related documents are Acrobat PDF format. User’s Manual and related documents are Acrobat PDF format. The Product Information CD contains the Adobe Acrobat 3.0 Reader installation software for user’s convenience. IV. ETB9F000 Series Quick Installation Guide ETB9F000 Series Quick Installation Guide User’s Manual and related documents are Acrobat PDF format. The Product Information CD contains the Adobe Acrobat 3.0 Reader installation software for user’s convenience. ETB9F000 Connectors & Switches Connectors RTC Battery Label IV. Connectors BAT1 Power Button SW1 LVDS1 Reset Button SW2 FDD Connector FDD1 FAN Connector FAN1 IDE1 FAN Connector FAN2 IDE2 Printer Port Connector CN12 (primary) Parallel IDE Connector(secondary) TFT LCD Connector CN2 Compact Flash Connector CN13 LCD Inverter Connector CN4 Front Panel Bezel Connector CN14 TV-OUT CN5 ATX Power Connector S-Video (TV-OUT) CN22 ETX Connector-X1 CN16 LAN1 Connector CN25 ETX Connector-X2 CN17 6-PinMiniDim Keyboard/Mouse CN7 ETX Connector-X3 CN18 VGA Connector CN8 ETX Connector-X4 CN19 Serial Port1 Connector CN9 Serial Port2 Connector CN20 USB Port1 &Port2 Connector CN10 ISA Slot1 ISA1 CN11 ISA Slot2 ISA2 PCI Slot1 PCI1 ISA Slot3 ISA3 PCI Slot2 PCI2 IR Connector PCI Slot3 PCI3 I2C BUS Connector J2 PCI Slot4 PCI4 SMBUS Connector J3 Audio Connector (support 5.1 Channel Audio) CN3 5.1 Channel Audio BUS CN21 Connector USB Port3 &Port4 Connector (Box Header) CN15 J1 FC1 ©Copyright 2009 AXIOMTEK Co., Ltd. 2 Board Layout Label LCD Connector (LVDS) Parallel IDE Connector Please refer to the ETB9F000 Series Product Information CD for the complete User’s Manual, drivers and utilities. User’s Manual and related documents are Acrobat PDF format. III. ETB9F000 Series Quick Installation Guide Version A1 May 2009 Printed in Taiwan 9419F000000E ©Copyright 2009AXIOMTEK Co., Ltd. Version A1 May 2009 Printed in Taiwan 9419F000000E 3