SUBMINIA TURE FUSES UBMINIATURE No. 372 / TR5 ® IEC 60127-3/IV 60127-3/IV,, 250 V V,, T Lead Free T ime-Current Time Lag (T) Characteristic Materials IEC 60127-3/IV Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated Approvals VDE SEMKO cULus Recognized METI CCC -40 ºC to +85 ºC (consider de-rating) Climatic Category -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-78) Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration 0,5 min Further infos see: www.wickmanngroup.com Further application infos see Fuseology: Lead Pull Strength 10 N (EN 60068-2-21) Solderability www.wickmanngroup.com/download/ fuseology.pdf 260 ºC, ≤ 3 s (Wave+Reflow) 350 ºC, ≤ 3 s (Soldering iron) Soldering Heat Resistance Holes in PCB 260 ºC, 10 s (IEC 60068-2-20) Marking Long Leads (L=18.8mm) Short Leads (L=4.3mm) , 372, 250 V, T, Current Rating, Approvals Unit Weight Limits for Pre-arcing Time 0.77 g (approx.) 4 x IN 10 x IN 40 mA ... 6.30 A >1h < 2 min 400 ms ... 10s 150 ms ... 3 s 20 ms ... 150 ms Permissible continuous operating current is ≤ 100 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.5 x IN 10 x IN Current Code Rating Capacity 1.0 x IN max. (mV) max. (mW) min. (A2s) 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A* 0040 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 35A / 250 V AC 1 50-60Hz cos ϕ = 1.0 40A / 250 V AC 50A / 250 V AC 1 Per UL, approved breaking capacity is 50 A at 250 V. Order Information 050118 Qty. OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] 900 500 400 370 300 260 200 170 150 140 130 125 120 110 110 95 95 85 80 80 75 80 58 90 70 80 100 110 120 130 140 150 160 170 180 200 220 360 450 450 600 700 1100 1200 1300 1250 0.009 0.01 0.02 0.023 0.047 0.066 0.14 0.2 0.28 0.36 0.9 1.3 2.5 3.8 5.5 9 14 23 35 60 95 94 105 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] • • • • • • • • • • • • • • • • • • • • G G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • p • • • • • • • • • • • • • • • • • • • • • G Expert Report * Conducting path min. 0.2 mm2 Series 372 Approvals CCC 2.75 x IN METI 2.1 x IN cURus 1.5 x IN SEMKO Rated Current VDE 5,08 +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % W ebLinks 1 +0,1 ∅ 0,6 Stock Conditions Lead Free Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Halogen free max. 8 L Operating TTemperature emperature Features ∅ 8,5 Packaging 000: Tape/Ammopack (1000 pcs.) 041: Short Leads - Bulk (1000 pcs.) Standard Dimensions (mm) Specifications p = pending Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE 00 0,0 10 TR5® / No. 372 I-t Characteristics ,00 10 (Min-Max Limit) IEC 60127-3/IV 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 I Fault / I Rated Contact WICKMANN for individual I-t curves 050118 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]