SUBMINIA TURE FUSES UBMINIATURE WICKMANN TE5® / No. 396 UL 248-14, 125V 125V,, T Specifications Time-Current Characteristic Packaging Time Lag (T) 000: Tape/Ammopack (1400 pcs.) 044: Short Leads - Bulk (1400 pcs.) Standard Materials UL 248-14 CSA C22.2 No. 248.14 Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper alloy, tin plated Approvals UL Listed: File No. E 67006 cUL Listed: File No. E 67006 MITI: File No. 32-1410 Operating TTemperature emperature -40ºC to +85ºC (consider de-rating) Climatic Category Features Dimensions (mm) max. 4 ∅ 0,6 Data Sheet 1,5 www.wickmann.com/products/396.pdf Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) 1 +0,1 Packaging Page 118 www.wickmann.com/pack Marking , T, Current Rating, Approvals FaxBack Document # 302 Unit Weight Limits for Pre-arcing Time 0.60g (approx.) 2.0 x IRated < 60s 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 1 2.50A 1 3.15A 1 4.00A 5.00A 6.30A 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 100A / 125VAC 50-60Hz cos ϕ = 1.0 900 800 700 600 550 480 390 350 300 250 220 210 160 155 145 130 125 120 110 110 95 95 45 50 55 60 70 80 80 90 95 100 110 135 130 155 185 210 250 300 350 400 475 570 0.0056 0.009 0.014 0.025 0.044 0.058 0.1 0.17 0.26 0.32 0.58 0.75 0.98 2.8 3.8 5.2 7.5 14 22 27 59 100 Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • MITI Permissible continuous operating current is ≤ 70% at ambient temperature of 23ºC (73.4ºF). Rated Amp Voltage1 Breaking Voltage Drop Power Dissipation Melting Integral 1.0 x IRated 10 x IRated Current Code Rating Capacity 1.0 x IRated max. (mV) max. (mW) min. (A2s) cUL 50mA ... 6.30A UL Rated Current Lead Pull Strength 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 1 sec. (Hand) Page 59 www.wickmann.com/itcurves Long Leads (L=18.8mm) Short Leads (L=4.3mm) Vibration Resistance Solderability Time-Current Curve Holes in PCB +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% 10N (IEC 60068-2-21) Approval Certificates www.wickmann.com/approvals 5,08 Stock Conditions 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration WebLinks 0,5 min L max. 8 8,5 -25ºC/+70ºC/21 days (IEC 60068-2-1..3) Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant • • • • • • • • 1 Contact WICKMANN for alternative version rated at 250V, Series No. 392. Order Information 000801 Qty. WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 OrderNumber Series 396 Amp Code Packaging • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] S UBMINIA TURE FUSES UBMINIATURE WICKMANN 10 TE5® / No. 396 0 ,0 00 I-t C haracte ristic s (M in-M ax Lim it) 10 U L 24 8-1 4 T es t v alu e ,0 0 0 1 ,0 00 10 10 Time (sec.) 0 1 0 .1 0 .0 1 0 .0 01 1 1 .5 2 3 4 5 6 7 8 9 10 15 I Fault / IRated Contact WICKMANN for individual I-t curves 000801 WebSite: www.wickmann.com FaxBack: +1 (404) 699-6176 • Europe Tel: +49 (2302) 662-107 • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]