SUBMINIA TURE FUSES UBMINIATURE No. 373 / TR5 ® UL 248-14, 250 V V,, F Specifications T ime-Current Packaging Quick Acting (F) Characteristic 000: Tape/Ammopack (1000 pcs.) 041: Short Leads - Bulk (1000 pcs.) Standard Materials UL 248-14 CSA C22.2 No. 248.14 Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated Approvals UL Listed CSA Certified Operating TTemperature emperature -40 ºC to +85 ºC (consider de-rating) Features Climatic Category Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant Halogen free CCCe for China import Dimensions (mm) -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-2-78) Stock Conditions +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration W ebLinks Further infos see: www.wickmanngroup.com Lead Pull Strength Further application infos see Fuseology: www.wickmanngroup.com/download/ fuseology.pdf Long Leads (L=18.8mm) Short Leads (L=4.3mm) Soldering Heat Resistance , 373, 250 V, F, Current Rating, Approvals Unit Weight 0.77 g (approx.) 2.0 x IN <5s 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 50A / 250 V AC 50-60 Hz cos ϕ = 1.0 1400 1300 1200 1100 1000 950 850 750 650 230 220 210 200 190 180 170 160 150 140 130 120 115 120 110 70 85 100 110 125 155 170 190 205 95 110 135 160 190 225 275 320 375 445 520 630 1000 1600 2000 0.0001 0.00023 0.00037 0.0013 0.0019 0.004 0.0065 0.014 0.032 0.016 0.024 0.039 0.069 0.11 0.2 0.38 0.63 1.2 1.9 3.5 6.2 9.1 30 55 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CCCe 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 1800 2100 cULus 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A 1 10.00A 1 Approvals CSA Permissible continuous operating current is ≤ 70 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.0 x IN 10 x IN Current Code Rating Capacity 1.0 x IN max. (mV) max. (mW) max. (A2s) UL < 60 s 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) Marking Limits for Pre-arcing Time 50 mA ... 10.00 A Solderability 260 ºC, 10 s (IEC 60068-2-20) Holes in PCB Rated Current 2.0 x IN 10 N (EN 60068-2-21) • • • • • • • • • • • • • • • • • • • • • • • • • • 1 Conducting path cross-section minimum ≥ 0.2mm² Order Information 050114 Qty. OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 373 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE 00 0,0 10 TR5® / No. 373 I-t Characteristics ,00 10 (Min-Max Limit) UL 248-14 Test value 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 IFault / I Rated Contact WICKMANN for individual I-t curves 050114 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]