SUBMINIA TURE FUSES UBMINIATURE No. 396 / TE5 ® UL 248-14, 125 V V,, T Leadfree T ime-Current Time Lag (T) Specifications Packaging 000: Tape/Ammopack (1400 pcs.) 044: Short Leads - Bulk (1400 pcs.) Characteristic Materials Standard Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated UL 248-14 CSA C22.2 No. 248.14 Approvals Operating TTemperature emperature UL Listed cUL Listed METI-PSE CCCe for China Import -40 ºC to +85 ºC (consider de-rating) Climatic Category -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-78) Features Leadfree Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant halogen free max. 4 max. 8 Vibration Resistance 24 cycles at 15 min. each (IEC 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Further infos see: www.wickmanngroup.com Further application infos see Fuseology: Lead Pull Strength 10 N (IEC 60068-2-21) Solderability www.wickmanngroup.com/download/ fuseology.pdf Holes in PCB Marking , T, Current Rating, Approvals Limits for Pre-arcing Time 50 mA ... 6.30 A < 60 s Unit Weight 0.60 g (approx.) Permissible continuous operating current is ≤ 70 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.0 x IN 10 x IN Current Code Rating Capacity 1.0 x IN max. (mV) max. (mW) min. (A2s) 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 1 2.50A 1 3.15A 1 4.00A 5.00A 6.30A Order Information 050118 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V Qty. 100A / 125 V AC 50-60 Hz cos ϕ = 1.0 OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 396 900 800 700 600 550 480 390 350 300 250 220 210 160 155 145 130 125 120 110 110 95 95 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] 45 50 55 60 70 80 80 90 95 100 110 135 130 155 185 210 250 300 350 400 475 570 0.0056 0.009 0.014 0.025 0.044 0.058 0.1 0.17 0.26 0.32 0.58 0.75 0.98 2.2 3.8 5.2 7.5 14 22 27 59 100 Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CCCe 2.0 x IN Soldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-20) Long Leads (L=18.8 mm) Short Leads (L=4.3 mm) Rated Current 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering Iron) METI-PSE 0,5 min 5,08 +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days - 95 % W ebLinks 1 +0,1 L ∅ 0,6 1,5 Stock Conditions cUL 8,5 UL Dimensions (mm) • • • • • • • • • • • • • • • • • • • • • • Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE 00 0,0 10 TE5® / No. 396 I-t Characteristics ,00 10 (Min-Max Limit) UL 248-14 Test value 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 I Fault / I Rated Contact WICKMANN for individual I-t curves 050118 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]