cross section A-A 0,2 0,3 12,5 A 10,8 Nietmutter mit Klemmteil clamping thread : +0,13 Gehäuse genietet riveted housing : M3 A Einpressbolzen / Gewindehülse press-fit bolt / threaded sleeve : 3,05 0,3 M3 oder/ or 27,5 Einpressbolzen press-fit bolt : #4-40 0,3 #4-40 39,1 M3 oder/ or Schnitt A-A / 3,2 3,2 min. 3 9 (min. 2.5) 6,4 (5.9) 9 0,8 0,1 3,9 max 1,5 standoff : 3,2 Abstandshülse / 5,8 054116 Nietmutter / riveted nut : l = 3,7/5,6/6,0/6,3/9,0 #4-40 13,72 M3 oder/ or min. 4,5 +0,3 9 +0,1 9 -0,3 l 8,3 +0,2 6,4 25,1 33,3 Polzahl / 0,2 Refer to table on page 2 Part No. : No. of contacts : Anschlußart / Refer to table on page 2 Anschlußlänge / Terminal Length : Bauart / 3W3 Type : Anforderungsstufe / Aufdruck / Zubehör / Logo : Sonderausführung / 3.2 mm Information: Class : 201=0.8µm (30 µin) Au CONTACT, GOLD/LEAD TERMINAL ERNI Accessory : Schichtaufbau im metallisierten Loch / für Einpresskontakt Zeichnung 114110 / für Einpressbolzen Zeichnung 114109 / Pressfit, Pressfit zone 3.6 mm Terminal Type : Refer to table on page 2 Special : Refer to table on page 2 metal plating of plated-through hole for press-fit contact drawing 114110 for press-fit bolt drawing 114109 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / +0,2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 07.06.1999 Date TMC-P 3W3-EP-9.0-3 TMC-P 3W3-EP-9.0-3 www.ERNI.com d Index Designation M:00021149.SZN 054879 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 9 mm Number of Pins 3W3 Accessory Termination Side: Pressfit bolt M3 064500 Accessory Termination Side: Pressfit bolt #4-40 063625 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 064460 Accessory Mating Side: Threaded sleeve #4-40 Accessory Termination Side: Pressfit bolt 063784 Ordering Information press-in tools Number of Pins 3W3 Upper Tool with quick change Device Lower Tool 220058 220147 www.erni.com