14,48 14,48 cross section A-A Schnitt A-A / 7,67 0,3 12,5 +0,13 ohne Zubehoer without accessories : 3,05 M3 oder/ or M3 oder/ or 0,2 A 10,8 A #4-40 0,86 Einpressbolzen / Gewindehülse press-fit bolt / threaded sleeve : #4-40 Einpressbolzen press-fit bolt : 5,94 3,2 0,3 min. 4,5 3,2 min. 3 (min. 2.5) 9 6,4 6,4 (5.9) +0,1 9 -0,3 114181 M3 M3 oder/ or Nietmutter mit Klemmteil clamping thread : max 1,5 9 Nietmutter riveted nut : M3 oder/ or 5,8 Nietmutter riveted nut : #4-40 53 0,3 #4-40 41,3 +0,3 +0,2 054116 8,3 3,9 38,9 47 Polzahl / Part No. : 0,2 Refer to table on page 2 No. of contacts : Anschlußart / Refer to table on page 2 Terminal Type : Pressfit Anschlußlänge / Terminal Length : Bauart / 5W5 Type : Anforderungsstufe / Aufdruck / Zubehör / Logo : Sonderausführung / Schichtaufbau im metallisierten Loch / für Einpresskontakt Zeichnung 114110 / für Einpressbolzen Zeichnung 114109 / 3.2 mm Information: Class : 201=0.8µm (30 µin) Au CONTACT, GOLD/LEAD TERMINAL ERNI Accessory : 6,3 +0,2 Refer to table on page 2 Special : Refer to table on page 2 metal plating of plated-through hole for press-fit contact drawing 114110 for press-fit bolt drawing 114109 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 9 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 09.07.2001 Date TMC-P 5W5-EP-9.0-5 TMC-P 5W5-EP-9.0-5 www.ERNI.com d Index Designation M:00021154.SZN 054880 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 9 mm Number of Pins 5W5 Accessory Termination Side: Pressfit bolt M3 104285 Accessory Termination Side: Pressfit bolt #4-40 103925 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 114136 Accessory Mating Side: Threaded sleeve #4-40 Accessory Termination Side: Pressfit bolt 063785 Ordering Information press-in tools Number of Pins 5W5 Upper Tool with Quick Change Device Lower Tool 220283 220284 www.erni.com