Aluminum Electrolytic Capacitors/ FC Low impedance Surface Mount Type Series: FC FC Type: FC V 앖 High temperature Lead-Free reflow(suffix:A✽) HA ■ Features ● ● ● ● Endurance : 105 °C 1000 h Low impedance (1/2 for HA series) Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature –40 °C to +105 °C 6.3 V.DC to 35 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached High temperature lead-free reflow products list. W.V. (V) 6.3 10 16 25 35 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current ±20 % of initial measured value < 200 % of initial specified value < initial specified value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k 100 k to 0.70 0.75 0.90 0.95 1.00 ■ Marking ■ Dimensions in mm (not to scale) (Unit : mm) A±0.2 Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (P) + L (I) Capacitance (µF) 22 j FC H φD±0.5 Negative polarity marking (–) B±0.2 – K 0.3 max. (I) Example:6.3 V 22 µF Marking color : BLACK W Pressure Relief (φ10 and larger) ( ) Reference size Lot number Rated Voltage Mark j 6.3 V A 10 V C 16 V E V 25 V 35 V Size code B C D E F G D L A, B H I W P K 4.0 5.0 6.3 8.0 8.0 10.0 5.4 +0.1 -0.2 5.4 +0.1 -0.2 5.4 +0.1 -0.2 6.2±0.3 10.2±0.3 10.2±0.3 4.3 5.3 6.6 8.3 8.3 10.3 5.5 max. 6.5 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-33 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ High temperature Lead-Free reflow Products Case size W.V. (V) 6.3 10 16 25 35 Cap. (±20 %) (µF) 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 Dia. Length (mm) 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 (mm) 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 Endurance : 105 °C 1000 h Min. Packaging Q'ty Specification Size Code B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G Ripple tan δ Impedance Part No. Current (RoHS:compliant) (100 kHz) (120 Hz) (100 kHz) (+105°C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEEFC0J220AR 60 0.26 3.00 EEEFC0J470AR 95 0.26 1.80 EEEFC0J680AP 140 0.26 1.00 EEEFC0J101AP 140 0.26 1.00 EEEFC0J221AP 230 0.26 0.40 EEEFC0J331AP 450 0.26 0.30 EEEFC0J102AP 670 0.26 0.15 EEEFC0J152AP 670 0.26 0.15 EEEFC1A330AR 95 0.19 1.80 EEEFC1A101AP 230 0.19 0.40 EEEFC1A151AP 230 0.19 0.40 EEEFC1A221AP 450 0.19 0.30 EEEFC1A471AP 670 0.19 0.15 EEEFC1A102AP 670 0.19 0.15 EEEFC1C100AR 60 0.16 3.00 EEEFC1C220AR 95 0.16 1.80 EEEFC1C470AP 140 0.16 1.00 EEEFC1C680AP 230 0.16 0.40 EEEFC1C101AP 230 0.16 0.40 EEEFC1C221AP 670 0.16 0.15 EEEFC1C331AP 670 0.16 0.15 EEEFC1C471AP 670 0.16 0.15 EEEFC1C681AP 670 0.16 0.15 EEEFC1E6R8AR 60 0.14 3.00 EEEFC1E220AP 140 0.14 1.00 EEEFC1E330AP 140 0.14 1.00 EEEFC1E470AP 230 0.14 0.40 EEEFC1E680AP 450 0.14 0.30 EEEFC1E101AP 450 0.14 0.30 EEEFC1E221AP 670 0.14 0.15 EEEFC1E331AP 670 0.14 0.15 EEEFC1E471AP 670 0.14 0.15 EEEFC1V1R0AR 60 0.12 3.00 EEEFC1V2R2AR 60 0.12 3.00 EEEFC1V3R3AR 60 0.12 3.00 EEEFC1V4R7AR 60 0.12 3.00 EEEFC1V6R8AR 95 0.12 1.80 EEEFC1V100AR 95 0.12 1.80 EEEFC1V220AP 140 0.12 1.00 EEEFC1V330AP 230 0.12 0.40 EEEFC1V470AP 230 0.12 0.40 EEEFC1V101AP 670 0.12 0.15 EEEFC1V221AP 670 0.12 0.15 EEEFC1V331AP 670 0.12 0.15 Reflow (5) (5) (5) (5) (6) (6) (6) (6) (5) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) Taping (pcs) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-34 – 00 Nov. 2012