SUBMINIA TURE FUSES UBMINIATURE No. 392 / TE5® IEC 60127-3/IV 60127-3/IV,, 250 V V,, T Lead Free Time-Current Time Lag (T) Specifications Packaging 000: Tape/Ammopack (1400 pcs.) 044: Short Leads - Bulk (1400 pcs.) Characteristic Materials Standard Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V0 Round Pins: Copper, Sn plated According to IEC 60127-3/IV Approvals Operating TTemperature emperature Lead Free Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant Halogen free Stock Conditions -40 ºC to +85 ºC (consider de-rating) Climatic Category -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-78) Features Dimensions (mm) max. 4 max. 8 8,5 1,5 0,5 min ∅ 0,6 5,08 +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days - 95 % Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration W ebLinks Lead Pull Strength Further infos see: www.wickmanngroup.com Further application infos see Fuseology: 1 +0,1 L VDE Expert Report SEMKO cULus Recognized METI-PSE CCC 10 N (IEC 60068-2-21) Solderability 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) www.wickmanngroup.com/download/ fuseology.pdf Holes in PCB Soldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-20) Long Leads (L=18.8 mm) Short Leads (L=4.3 mm) Marking , T, Current Rating, Approvals Unit Weight 0.60 g (approx.) Limits for Pre-arcing TTime ime 4 x IN 10 x IN VDE Permissible continuous operating current is ≤ 100 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.5 x IN 10 x IN Current Code Rating Capacity 1.0 x IN 50-60Hz/cos ϕ = 1.0 max. (mV) max. (mW) min. (A2s) 800 mA 1.00 A 1.25 A 1.60 A 2.00 A 2.50 A 3.15 A 4.00 A 0800 1100 1125 1160 1200 1250 1315 1400 250V 250V 250V 250V 250V 250V 250V 250V 25A/250 V AC 25A/250 V AC 25A/250 V AC 25A/250 V AC 25A/250 V AC 25A/250 V AC 32A/250 V AC 40A/250 V AC 110 115 100 95 90 85 80 75 280 400 500 600 700 750 1100 1200 3.80 5.80 9.75 13.50 21.00 32.00 55.00 100.00 Approvals CCC 2.75 x IN 400 ms ... 10 s 150 ms ... 3 s 20 ms ... 150 ms METI-PSE < 2 min cURus 2.1 x IN >1h SEMKO 1.5 x IN 800 mA ... 4.00 A VDE Rated Current G G G G G G G G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • G = Expert Report Order Information 050118 Qty. OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 392 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE Time (sec.) TE5® / No. 392 I Fault / I Rated Contact WICKMANN for individual I-t curves 050118 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]