MS75083, MS75084, MS75085, MS18130, MS14046, MS90538, MS75101 www.vishay.com Vishay Dale Inductors, Military, MIL-PRF-15305 Qualified, Type LT, Molded, Axial Leaded FEATURES • Wide inductance range in small package • Flame retardant coating • Precision performance, excellent reliability, sturdy construction • Epoxy molded construction provides superior moisture protection ELECTRICAL SPECIFICATIONS INDUCTANCE RANGE AND MILITARY STANDARD MILITARY STANDARD INDUCTANCE RANGE MIL. RANGE (μH) (in bold face) CLASSIFICATION FROM TO GRADE CLASS MS75083 0.10 1 1 B MS75084 1.2 27 1 A MS75085 33 1000 1 A MS18130 0.15 4.7 1 B MS14046 5.6 33 1 A MS90538 36 240 1 A MS75101 3.3 27 1 A Inductance Tolerance: ± 10 %, standard Insulation Resistance: 1000 M minimum per MIL-STD-202, method 302, test condition B Dielectric Strength: Per MIL-STD-202, method 301: 1000 VAC MECHANICAL SPECIFICATIONS Terminal Strength: Per MIL-STD-202, method 211, test condition A: 5 pounds pull and twist Weight: MS75083 = 0.30 g maximum MS75084 = 0.30 g maximum MS75085 = 0.30 g maximum MS18130 = 0.65 g maximum MS14046 = 0.65 g maximum MS90538 = 0.65 g maximum MS75101 = 0.95 g maximum MATERIAL SPECIFICATIONS Encapsulant: Epoxy Standard Terminal: MS75083, MS75084, MS75085, 24 AWG; MS18130, MS14046, MS90538, MS75101, 22 AWG; tinned copper DIMENSIONS in inches [millimeters] C Typ. B D Dia. MS75083 MS75084 MS75085 MS18130 MS14046 MS90538 MS75101 A (DIA.) B (1) • H/P 4342A Q-meter • Measurements corporation megacycle meter, model 59 • Wheatstone bridge A Dia. MODEL TEST EQUIPMENT C (TYP.) D (DIA.) Note (1) Test procedures per MIL-PRF-15305 Max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] Min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ENVIRONMENTAL PERFORMANCE Max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] TEST Min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] Barometric Pressure Thermal Shock CONDITIONS SPECIFICATIONS Min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] Flammability - Max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] Overload Low Temperature Storage Resistance to Soldering Heat Resistance to Solvents - MIL-STD-202, method 105 MIL-STD-202, method 107 MIL-STD-202, method 111 MIL-PRF-15305 - MIL-PRF-15305 Max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] Min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] Max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] Min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] Max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] Min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] Max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686] Min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584] Revision: 11-May-15 C A-1 A - MIL-STD-202, method 210 MIL-STD-202, method 215 Document Number: 34189 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MS75083, MS75084, MS75085, MS18130, MS14046, MS90538, MS75101 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 MS75085 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 MS18130 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 MS14046 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Revision: 11-May-15 SRF MIN. (MHz) (1) DCR MAX. () 40 40 38 35 33 33 30 30 30 30 28 28 25 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 680.0 640.0 600.0 550.0 510.0 430.0 410.0 365.0 330.0 300.0 275.0 250.0 230.0 0.08 0.09 0.10 0.12 0.14 0.16 0.22 0.30 0.35 0.50 0.60 0.85 1.0 1350 1270 1200 1105 1025 960 815 700 650 545 495 415 385 25 28 30 30 37 45 45 45 50 50 55 55 45 40 50 50 50 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 150.0 140.0 125.0 115.0 100.0 90.0 80.0 75.0 65.0 60.0 55.0 50.0 40.0 35.0 30.0 25.0 20.0 0.18 0.22 0.30 0.40 0.55 0.85 1.0 1.2 1.8 2.0 2.7 3.7 2.7 2.8 3.1 3.3 3.5 590 535 455 395 355 270 250 230 185 175 155 130 155 150 145 140 135 45 45 45 45 50 50 50 30 30 30 30 30 30 30 30 30 30 30 30 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 24.0 22.0 20.0 18.0 15.0 14.0 13.0 12.0 11.0 10.0 9.0 8.0 7.0 6.5 6.0 5.0 4.0 3.8 3.4 3.4 3.6 4.5 5.7 6.7 7.3 8.0 13.0 15.0 17.0 21.0 25.0 28.0 35.0 42.0 46.0 60.0 65.0 72.0 130 125 110 100 92 88 84 66 61 57 52 47 45 40 36 35 30 29 28 50 50 45 45 50 50 50 50 33 33 33 33 33 33 33 33 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 525.0 450.0 360.0 310.0 280.0 250.0 220.0 200.0 180.0 160.0 150.0 135.0 120.0 110.0 100.0 90.0 0.03 0.055 0.09 0.12 0.135 0.15 0.22 0.29 0.42 0.50 0.65 0.95 1.20 2.0 2.30 2.60 2450 1810 1400 1225 1150 1100 900 785 650 600 525 435 385 300 280 260 45 50 50 55 65 65 75 75 60 65 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 60.0 55.0 50.0 45.0 42.0 40.0 34.0 30.0 25.0 19.0 0.32 0.50 0.60 0.90 1.10 1.40 2.25 2.50 2.60 3.00 495 395 360 290 265 240 185 175 170 165 PHENOLIC CORE MS75084 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 TEST FREQ. L AND Q (MHz) IRON CORE ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 RATED DC CURRENT (mA) (2) Q MIN. FERRITE CORE MS75083 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 MODEL MILITARY MILITARY STANDARD TYPE LT4K -1 339 -2 340 -3 341 -4 342 -5 343 -6 344 -7 345 -8 346 -9 347 -10 348 -11 349 -12 350 -13 351 LT10K -1 061 -2 062 -3 063 -4 064 -5 065 -6 066 -7 067 -8 068 -9 069 -10 070 -11 071 -12 072 -13 073 -14 074 -15 075 -16 076 -17 077 LT10K -1 078 -2 079 -3 080 -4 081 -5 082 -6 083 -7 084 -8 085 -9 086 -10 087 -11 088 -12 089 -13 090 -14 091 -15 092 -16 093 -17 094 -18 095 -19 096 LT4K -1 074 -2 075 -3 076 -4 077 -5 078 -6 079 -7 080 -8 081 -9 082 -10 083 -11 084 -12 085 -13 086 -14 087 -15 088 -16 089 LT10K -1 128 -2 129 -3 130 -4 131 -5 132 -6 133 -7 134 -8 135 -9 136 -10 137 PHENOLIC CORE TOL. (%) IRON CORE IND. (μH) Document Number: 34189 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MS75083, MS75084, MS75085, MS18130, MS14046, MS90538, MS75101 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MS90538 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 75.0 82.0 91.0 100.0 110.0 120.0 130.0 150.0 160.0 180.0 200.0 220.0 240.0 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 MS75101 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 MODEL MILITARY MILITARY STANDARD TYPE LT10K -1 001 -2 002 -3 003 -4 004 -5 005 -6 006 -7 007 -8 008 -9 009 -10 010 -11 011 -12 012 -13 013 -14 014 -15 015 -16 016 -17 017 -18 018 -19 019 -20 020 -21 021 LT10K -01 169 -02 170 -03 171 -04 172 -05 173 -06 174 -07 175 -08 176 -09 177 -10 178 -11 179 -12 180 Q MIN. 60 60 60 55 55 55 55 55 55 50 50 50 60 65 65 65 65 65 65 65 65 30 30 30 30 30 30 30 50 55 60 60 65 TEST FREQ. L AND Q (MHz) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 LT10K 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 RATED DC CURRENT (mA) (2) SRF MIN. (MHz) (1) DCR MAX. () 15.5 14.5 13.7 13.0 12.7 12.0 11.5 11.0 10.5 10.3 10.0 9.5 8.9 8.7 8.5 8.0 7.5 7.0 6.5 6.2 5.9 2.50 2.60 2.70 2.75 2.85 3.00 3.15 3.30 3.70 3.90 4.30 4.50 4.90 5.20 5.45 6.05 6.40 6.75 7.10 7.45 7.80 180 176 172 170 167 164 160 156 147 143 136 133 128 124 121 114 111 108 106 103 101 70.0 65.0 60.0 50.0 50.0 48.0 42.0 36.0 30.0 30.0 24.0 22.0 0.140 0.155 0.210 0.280 0.375 0.440 0.605 1.05 1.20 1.95 2.20 2.75 990 870 745 645 560 540 440 370 310 255 240 205 IRON CORE TOL. (%) IRON CORE IND. (μH) Notes (1) Measured with full length lead (2) Rated DC current based on the maximum temperature rise as shown in table MAXIMUM TEMPERATURE RISE OPERATING TEMPERATURE RANGE MS75083 0.10 μH to 1.0 μH = 35 °C at + 90 °C ambient -55 °C to +125 °C MS75084 1.2 μH to 27 μH = 15 °C at + 90 °C ambient -55 °C to +105 °C MS75085 33 μH to 1000 μH = 15 °C at + 90 °C ambient -55 °C to +105 °C MS18130 0.15 μH to 4.7 μH = 35 °C at + 90 °C ambient -55 °C to +125 °C MS14046 5.6 μH to 33 μH = 15 °C at + 90 °C ambient -55 °C to +105 °C MS90538 36 μH to 240 μH = 15 °C at + 90 °C ambient -55 °C to +105 °C MS75101 3.3 μH to 27 μH = 15 °C at + 90 °C ambient -55 °C to +105 °C DESCRIPTION - MILITARY PART NUMBER MS75084 -12 MILITARY STANDARD INDUCTANCE VALUE OR LT 10 K 072 TYPE GRADE AND CLASS FAMILY ID NUMBER GLOBAL PART NUMBER M S 7 5 0 PRODUCT FAMILY Revision: 11-May-15 4 8 - 1 INDUCTANCE VALUE 2 R U PACKAGE CODE Document Number: 34189 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000