IMS-5 Vishay Dale Inductors, Commercial, Molded, Shielded, Axial Leaded FEATURES ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % standard, ± 5 % available Insulation Resistance: 1000 MΩ minimum per MIL-STD-202, method 302, test condition B Dielectric Withstanding Voltage: 1000 VAC per MIL-STD-202, method 301 (at sea level) Percent Coupling: 3 % maximum per MIL-PRF-15305 Operating Temperature: - 55 °C to + 105 °C ENVIRONMENTAL PERFORMANCE TEST CONDITIONS SPECIFICATIONS C MIL-STD-202, method 105 Barometric Pressure Thermal Shock • • • • Wide inductance range in small package Flame retardant coating Electromagnetic shield-finest shield available Precision performance, excellent reliability, sturdy construction • Epoxy molded construction provides superior moisture protection • Compliant to RoHS directive 2002/95/EC MECHANICAL SPECIFICATIONS Terminals: 5 lb pull per MIL-STD-202, method 211, test condition A Weight: IMS-5 = 0.85 g maximum MATERIAL SPECIFICATIONS Encapsulant: Epoxy Standard Terminals: #22 AWG, tinned copper A-1 MIL-STD-202, method 107 Flammability - MIL-STD-202, method 111 Overload - MIL-PRF-15305 INDUCTANCE RANGE AND MILITARY STANDARD Low Temperature Storage - MIL-PRF-15305 INDUCTANCE RANGE (μH) Resistance to Soldering Heat A MIL-STD-202, method 210 Resistance to Solvents - MIL-STD-202, method 215 MATERIAL MIN. MAX. CORE SHIELD 0.10 0.82 Phenolic Powdered iron 1.0 12 15 8200 Powdered iron Powdered iron Ferrite Ferrite DIMENSIONS in inches [millimeters] 1.44 ± 0.188 [36.57 ± 4.78] 0.025 ± 0.002 [0.635 ± 0.051] 0.410 ± 0.020 [10.41 ± 0.508] 0.162 ± 0.010 [4.11 ± 0.254] STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 TOL. (%) ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q MIN. 50 51 51 50 49 47 46 44 44 43 42 40 TEST FREQUENCY L AND Q (MHz) 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 SRF MIN. (MHz) (1) 250.0 250.0 250.0 250.0 250.0 250.0 250.0 250.0 235.0 210.0 190.0 180.0 DCR MAX. (Ω) 0.025 0.034 0.037 0.047 0.067 0.11 0.13 0.18 0.25 0.33 0.45 0.59 RATED DC CURRENT (mA) (2) 1790 1530 1470 1300 1100 855 780 670 565 490 420 370 INCREMENTAL CURRENT (mA) (3) - MODEL IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 Notes (1) Measured with full length lead (2) Rated DC current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient (3) Incremental current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value Document Number: 34048 Revision: 14-Sep-09 For technical questions, contact: [email protected] www.vishay.com 31 IMS-5 Inductors, Commercial, Molded, Shielded, Axial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 TOL. (%) ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q MIN. 44 44 44 44 44 44 44 44 44 44 50 50 50 55 45 45 45 45 45 50 50 50 50 50 50 55 55 55 55 55 55 60 60 60 60 60 60 45 45 45 45 45 45 45 45 44 40 40 TEST FREQUENCY L AND Q (MHz) 25.0 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 SRF MIN. (MHz) (1) 140.0 130.0 115.0 105.0 100.0 92.0 85.0 75.0 70.0 65.0 55.0 50.0 46.0 44.0 49.0 45.0 41.0 38.0 34.0 29.0 27.0 25.0 21.0 10.5 10.0 9.7 8.5 8.0 7.5 7.0 6.5 6.2 5.7 4.7 4.5 4.2 3.8 1.5 1.2 1.0 0.97 0.92 0.84 0.80 0.74 0.73 0.66 0.54 DCR MAX. (Ω) 0.07 0.10 0.12 0.14 0.19 0.28 0.35 0.40 0.55 0.72 1.02 1.32 1.62 2.00 0.80 0.89 0.96 1.19 1.37 1.93 2.11 2.23 2.70 2.44 3.12 3.6 4.1 4.4 5.0 5.8 6.4 7.4 9.5 10.5 11.8 13.0 17.5 22.1 26.5 29.9 33.8 47.3 53.0 73.8 81.6 98.9 111.0 119.0 INCREMENTAL CURRENT (mA) (3) 250.0 235.0 220.0 200.0 190.0 180.0 175.0 160.0 150.0 140.0 120.0 95.0 90.0 85.0 80.0 70.0 65.0 60.0 58.0 55.0 50.0 45.0 40.0 35.0 33.0 30.0 27.0 25.0 22.0 20.0 19.0 17.0 16.0 15.0 RATED DC CURRENT (mA) (2) 1070 895 815 775 650 535 480 450 380 335 280 250 220 200 315 300 290 260 240 205 195 190 170 180 160 150 140 135 125 115 110 105 92 90 80 80 70 60 55 50 50 40 40 35 31 28 27 26 MODEL IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 Notes (1) Measured with full length lead (2) Rated DC current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient (3) Incremental current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value ORDERING INFORMATION IMS-5 10 μH ± 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S MODEL www.vishay.com 32 0 5 E R PACKAGE CODE 1 0 INDUCTANCE VALUE For technical questions, contact: [email protected] 0 K INDUCTANCE TOLERANCE Document Number: 34048 Revision: 14-Sep-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000