IH www.vishay.com Vishay Dale Filter Inductors, High Current, Radial Leaded FEATURES • Printed circuit mounting • Pre-tinned leads • Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, class 3 requirements • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Operating Temperature: -55 °C to +125 °C (no load), -55 °C to +75 °C (at full rated current) Noise filtering for switching regulators, power amplifiers, power supplies and SCR and Triac control circuits Current Rating: Maximum continuous operating current (DC or RMS) based on a 50 °C temperature rise MECHANICAL SPECIFICATIONS Wire: Solid soft copper Terminals: Extensions of the winding Core Material: Ferrite Coating: Polyolefin tubing DIMENSIONS in inches [millimeters] A B 1.0 ± 0.125 [25.40 ± 3.18] Schematic D Leads tinned to within 0.125 [3.18] C MODEL IH-3 IH-3 IH-3 IH-3 IH-3 IH-3 IH-3 IH-5 IH-5 IH-5 IH-5 IH-5 IH-5 IH-5 IH-10 IH-10 IH-10 IH-10 IH-10 IH-10 IH-15 IH-15 IH-15 IH-15 Revision: 08-Aug-14 IND. (μH) 5 10 27 50 100 150 250 5 10 27 50 68 100 150 5 10 27 50 68 100 5 10 27 50 A (MAX.) 0.875 [22.23] 1.125 [28.58] 0.875 [22.23] 0.875 [22.23] 1.125 [28.58] 1.375 [34.93] 1.625 [41.28] 0.875 [22.23] 1.125 [28.58] 0.875 [22.23] 1.125 [28.58] 1.125 [28.58] 1.375 [34.93] 1.625 [41.28] 1.125 [28.58] 1.375 [34.93] 1.125 [28.58] 1.375 [34.93] 1.375 [34.93] 1.625 [41.28] 1.375 [34.93] 1.687 [42.85] 1.375 [34.93] 1.625 [41.28] B (MAX.) 0.600 [15.24] 0.625 [15.88] 0.800 [20.32] 0.800 [20.32] 0.800 [20.32] 0.800 [20.32] 0.800 [20.32] 0.625 [15.88] 0.625 [15.88] 0.840 [21.34] 0.840 [21.34] 0.860 [21.84] 0.860 [21.84] 0.860 [21.84] 0.635 [16.13] 0.635 [16.13] 0.935 [23.75] 0.935 [23.75] 0.935 [23.75] 0.935 [23.75] 0.700 [17.78] 0.700 [17.78] 1.000 [25.40] 1.000 [25.40] C ± 0.062 [± 1.57] 0.500 [12.70] 0.687 [17.45] 0.437 [11.10] 0.750 [19.05] 0.937 [23.80] 1.062 [26.97] 1.312 [33.32] 0.750 [19.05] 1.000 [25.40] 0.562 [14.27] 0.750 [19.05] 0.875 [22.23] 1.000 [25.40] 1.250 [31.75] 0.812 [20.62] 1.218 [30.94] 0.687 [17.45] 0.937 [23.80] 1.125 [28.58] 1.312 [33.32] 0.937 [23.80] 1.500 [38.10] 0.937 [23.80] 1.125 [28.58] D ± 0.005 [± 0.127] 0.042 [1.067] 0.042 [1.067] 0.042 [1.067] 0.042 [1.067] 0.042 [1.067] 0.042 [1.067] 0.042 [1.067] 0.053 [1.35] 0.053 [1.35] 0.053 [1.35] 0.053 [1.35] 0.053 [1.35] 0.053 [1.35] 0.053 [1.35] 0.065 [1.65] 0.065 [1.65] 0.065 [1.65] 0.065 [1.65] 0.065 [1.65] 0.065 [1.65] 0.082 [2.08] 0.082 [2.08] 0.082 [2.08] 0.082 [2.08] Document Number: 34013 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IH www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. AT 1 kHz (μH) TOL. (%) IH-3 5 IH-3 10 IH-3 IH-3 DCR MAX. () RATED DC CURRENT (mA) ± 10 0.015 10 000 25 000 ± 10 0.018 9000 19 000 27 ± 10 0.035 7000 12 000 50 ± 10 0.050 5600 8000 IH-3 100 ± 10 0.065 5200 6000 IH-3 150 ± 10 0.075 5000 5000 IH-3 250 ± 10 0.090 5000 4000 IH-5 5 ± 10 0.012 14 000 25 000 IH-5 10 ± 10 0.015 12 000 19 000 IH-5 27 ± 10 0.025 9000 13 000 IH-5 50 ± 10 0.030 8000 10 000 IH-5 68 ± 10 0.035 7500 9000 IH-5 100 ± 10 0.050 7500 7000 MODEL INCREMENTAL CURRENT (mA) IH-5 150 ± 10 0.060 7000 5000 IH-10 5 ± 10 0.010 19 000 25 000 IH-10 10 ± 10 0.012 16 000 19 000 IH-10 27 ± 10 0.018 12 500 12 000 IH-10 50 ± 10 0.025 11 000 10 000 IH-10 68 ± 10 0.027 10 000 8000 IH-10 100 ± 10 0.030 10 000 7000 IH-15 5 ± 10 0.008 24 000 25 000 IH-15 10 ± 10 0.010 20 000 19 000 IH-15 27 ± 10 0.015 16 000 14 000 IH-15 50 ± 10 0.020 15 000 10 000 MARKING - Vishay Dale - Model - Inductance value - Date code ORDERING INFORMATION 10 μH IH-5 MODEL ± 10 % INDUCTANCE VALUE EB INDUCTANCE TOLERANCE e2 PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD 0 K GLOBAL PART NUMBER I H 0 MODEL Revision: 08-Aug-14 5 E B PACKAGE CODE 1 0 INDUCTANCE VALUE INDUCTANCE TOLERANCE Document Number: 34013 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000