VISHAY IHA-101

IHA
Vishay Dale
Filter Inductors
High Current
FEATURES
•
•
•
•
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IHA-101
IHA-102
IHA-103
IHA-104
IHA-105
IHA-201
IHA-202
IHA-203
IHA-204
IHA-205
IHA-301
IHA-302
IHA-303
IHA-304
IHA-305
IHA-501
IHA-502
IHA-503
IHA-504
IHA-505
IND.
at 1 kHz
(µH)
50
100
250
500
1000
27
50
100
250
500
5
10
27
50
100
5
10
27
50
100
TOL.
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
± 10 %
DCR
MAX.
(Ohms)
0.120
0.160
0.280
0.420
0.600
0.060
0.085
0.120
0.200
0.320
0.015
0.021
0.040
0.050
0.070
0.010
0.015
0.030
0.040
0.060
RATED
CURRENT
(Max. Amps)
2.5
2.1
1.8
1.6
1.4
3.7
3.1
2.7
2.4
2.3
6.8
6.1
4.8
4.3
4.2
9.3
8.3
6.5
6.1
5.9
Printed circuit mounting (axial leads)
Pre-tinned leads
Low cost construction
Protected by polyolefin tubing - flame retardant
UL type VW-1 per MIL-I-23053/5, Class 3
requirements
RoHS
COMPLIANT
DIMENSIONS in inches [millimeters]
1.25 [31.75]
Min. Typ.
B
Max.
0.125
[3.18]
C Typ.
A Max.
Schematic
MODEL
A
(Max.)
B
(Max.)
C
± 0.002 [0.050]
Inductance: Measured at 1.0 V with zero DC current
Current Rating: Maximum continuous operating current
(DC or RMS) based on 50 °C temperature rise
Dielectric Rating: 2500 VRMS, 60 Hz, applied for one
minute between winding and outer circumference to within
0.250" [6.35 mm] of the insulation sleeve edge
Operating Temperature: - 55 °C to + 125 °C (no load)
- 55 °C to + 75 °C (at full rated current)
IHA-101
IHA-102
IHA-103
IHA-104
IHA-105
IHA-201
IHA-202
IHA-203
IHA-204
IHA-205
IHA-301
IHA-302
IHA-303
IHA-304
IHA-305
IHA-501
IHA-502
IHA-503
IHA-504
IHA-505
0.475 [12.07]
0.475 [12.07]
0.475 [12.07]
0.550 [13.97]
0.550 [13.97]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.600 [15.24]
0.750 [19.05]
0.475 [12.07]
0.475 [12.07]
0.550 [13.97]
0.550 [13.97]
0.550 [13.97]
0.475 [12.07]
0.475 [12.07]
0.700 [17.78]
0.700 [17.78]
0.700 [17.78]
0.800 [20.32]
0.800 [20.32]
1.050 [26.67]
1.050 [26.67]
1.175 [29.85]
0.800 [20.32]
0.800 [20.32]
0.920 [23.37]
0.920 [23.37]
1.050 [26.67]
0.800 [20.32]
0.920 [23.37]
0.800 [20.32]
0.920 [23.37]
1.175 [29.85]
1.050 [26.67]
1.050 [26.67]
1.050 [26.67]
1.050 [26.67]
1.300 [33.02]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
MECHANICAL SPECIFICATIONS
MARKING
Winding: Layered solenoid type
Wire: Solid soft copper
Terminals: Tinned copper leads
Encapsulant: Polyolefin tubing
Core Material: Ferrite
- Vishay Dale
- Model
- Date code
ELECTRICAL SPECIFICATIONS
DESCRIPTION
IHA-101
APPLICATIONS
Noise filtering for switching regulators, power amplifiers,
power supplies and SCR and Triac control circuits
50 µH
10 %
EB
e2
INDUCTANCE INDUCTANCE PACKAGE JEDEC LEAD
MODEL
(Pb)-FREE
VALUE
TOLERANCE
CODE
STANDARD
GLOBAL PART NUMBER
I
H
A
1
MODEL
www.vishay.com
38
For technical questions contact [email protected]
0
1
E
B
PACKAGE
CODE
Document Number: 34014
Revision: 18-Apr-06
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1