IHB Datasheet

IHB
www.vishay.com
Vishay Dale
Filter Inductors, High Current, Radial Leaded
FEATURES
• Printed circuit mounting
• Wide range of inductance and current ratings
• Pre-tinned leads
• Optional polyolefin tubing and printing available
at additional cost
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with zero DC current
Dielectric: 2500 VRMS between winding and 0.250"
[6.35 mm] of insulating covering edge (with optional
insulating covering)
Current Rating: Maximum continuous operating current
based on a + 50 °C temperature rise
Operating Temperature: - 55 °C to + 130 °C (no load),
- 55 °C to + 80 °C (at full rated current)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL SPECIFICATIONS
Terminals: Extensions of the winding wire, solder coated to
within 0.063" [1.60 mm] of body
Mounting: Center hole for mechanical mounting, insulated
bushings recommended for center hole mounting
DIMENSIONS in inches [millimeters]
F (2)
B
D Dia.
0.500 ± 0.062
[12.70 ± 1.57]
E (1)
A Dia.
MODEL
IHB-1
IHB-2
IHB-3
IHB-4
IHB-5
IHB-6
A (MAX.)
0.660 [16.76]
0.825 [20.96]
1.100 [27.94]
1.600 [40.64]
1.600 [40.64]
2.000 [50.80]
B (MAX.)
0.840 [21.34]
0.840 [21.34]
0.840 [21.34]
1.030 [26.16]
1.450 [36.83]
1.500 [38.10]
D (MIN.)
0.115 [2.92]
0.115 [2.92]
0.115 [2.92]
0.175 [4.45]
0.175 [4.45]
0.240 [6.10]
Notes
(1) E varies between components, see individual model specifications for details, tolerance of ± 0.035
(2) F varies between components, see individual model specifications for details
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IND. AT 1 kHz
(μH)
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
Revision: 26-Mar-14
TOL.
(%)
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
DCR MAX.
()
0.003
0.003
0.004
0.004
0.005
0.005
0.005
0.006
0.007
0.007
0.008
0.009
0.010
0.011
0.015
0.016
0.020
0.030
0.040
0.046
RATED DC CURRENT
(A)
14.9
14.9
12.9
12.9
11.6
11.6
11.6
10.6
9.8
9.8
9.2
8.6
8.2
7.8
6.7
6.5
5.8
4.7
4.1
3.8
LEAD “E” SPACING
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.450 [11.43]
0.475 [12.07]
0.475 [12.07]
MAXIMUM LEAD “F”
DIAMETER
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
Document Number: 34015
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-1
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-2
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IND. AT 1 kHz
(μH)
47
56
68
82
100
120
150
180
220
270
330
390
470
560
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
Revision: 26-Mar-14
TOL.
(%)
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 10
± 10
± 10
DCR MAX.
()
0.062
0.069
0.077
0.083
0.095
0.127
0.181
0.217
0.240
0.300
0.336
0.460
0.636
0.696
0.003
0.003
0.003
0.003
0.004
0.005
0.005
0.005
0.005
0.006
0.007
0.007
0.009
0.009
0.013
0.018
0.019
0.026
0.029
0.030
0.035
0.039
0.053
0.060
0.080
0.090
0.098
0.110
0.150
0.213
0.305
0.320
0.355
0.388
0.430
0.590
0.818
1.140
1.260
1.390
1.540
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.006
0.008
0.009
RATED DC CURRENT
(A)
3.3
3.1
2.9
2.8
2.7
2.3
1.9
1.8
1.7
1.5
1.4
1.2
1.0
1.0
17.4
17.4
17.4
17.4
15.1
13.5
13.5
13.5
13.5
12.3
11.4
11.4
10.0
10.0
8.4
7.1
6.9
5.9
5.6
5.5
5.1
4.8
4.1
3.9
3.4
3.2
3.0
2.9
2.5
2.1
1.7
1.7
1.6
1.5
1.5
1.2
1.1
0.9
0.8
0.8
0.8
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
17.6
17.6
14.4
12.4
11.7
LEAD “E” SPACING
0.470 [11.94]
0.470 [11.94]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.500 [12.70]
0.480 [12.19]
0.480 [12.19]
0.480 [12.19]
0.475 [12.07]
0.475 [12.07]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.620 [15.75]
0.615 [15.62]
0.615 [15.62]
0.575 [14.61]
0.575 [14.61]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.600 [15.24]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.590 [14.99]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.790 [20.07]
0.770 [19.56]
0.750 [19.05]
0.750 [19.05]
MAXIMUM LEAD “F”
DIAMETER
0.025 [0.644]
0.025 [0.644]
0.025 [0.644]
0.025 [0.644]
0.025 [0.644]
0.023 [0.573]
0.020 [0.510]
0.020 [0.510]
0.020 [0.510]
0.018 [0.455]
0.018 [0.455]
0.016 [0.405]
0.014 [0.361]
0.014 [0.361]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051[1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.045 [1.15]
0.040 [1.02]
0.040 [1.02]
0.036 [0.912]
0.036 [0.912]
0.036 [0.912]
0.036 [0.912]
0.036 [0.912]
0.032 [0.812]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
0.028 [0.723]
0.028 [0.723]
0.025 [0.644]
0.023 [0.573]
0.020 [0.510]
0.020 [0.510]
0.020 [0.510]
0.020 [0.510]
0.020 [0.510]
0.018 [0.455]
0.016 [0.405]
0.014 [0.361]
0.014 [0.361]
0.014 [0.361]
0.014 [0.361]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.064 [1.63]
0.057 [1.45]
0.057 [1.45]
Document Number: 34015
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-3
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IND. AT 1 kHz
(μH)
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
Revision: 26-Mar-14
TOL.
(%)
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
DCR MAX.
()
0.010
0.011
0.012
0.017
0.022
0.024
0.026
0.029
0.032
0.034
0.046
0.064
0.072
0.080
0.110
0.122
0.169
0.187
0.205
0.256
0.288
0.426
0.462
0.518
0.705
1.020
1.140
1.270
1.670
1.860
0.002
0.002
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.005
0.005
0.006
0.008
0.009
0.010
0.011
0.012
0.018
0.019
0.021
0.023
0.025
0.028
0.040
0.045
0.050
0.056
0.074
0.082
0.114
0.125
0.139
0.154
0.216
0.232
0.324
0.360
0.494
0.555
0.773
RATED DC CURRENT
(A)
11.1
10.6
10.2
8.5
7.5
7.2
6.9
6.5
6.2
6.0
5.2
4.4
4.1
3.9
3.4
3.2
2.7
2.6
2.5
2.2
2.1
1.7
1.6
1.5
1.3
1.1
1.0
1.0
0.9
0.8
33.8
33.8
27.6
27.6
27.6
27.6
23.9
23.9
23.9
21.4
21.4
19.5
16.9
15.9
15.1
14.4
13.8
11.3
11.0
10.4
10.0
9.6
9.0
7.6
7.1
6.8
6.4
5.6
5.3
4.5
4.3
4.1
3.9
3.3
3.1
2.7
2.5
2.2
2.0
1.7
LEAD “E” SPACING
0.750 [19.05]
0.750 [19.05]
0.800 [20.32]
0.780 [19.81]
0.780 [19.81]
0.760 [19.30]
0.760 [19.30]
0.760 [19.30]
0.760 [19.30]
0.760 [19.30]
0.740 [18.80]
0.720 [18.29]
0.720 [18.29]
0.790 [20.07]
0.770 [19.56]
0.770 [19.56]
0.740 [18.80]
0.740 [18.80]
0.740 [18.80]
0.725 [18.42]
0.725 [18.42]
0.715 [18.16]
0.760 [19.30]
0.760 [19.30]
0.740 [18.80]
0.720 [18.29]
0.720 [18.29]
0.720 [18.29]
0.700 [17.78]
0.730 [18.54]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.11 [28.19]
1.11 [28.19]
1.11 [28.19]
1.11 [28.19]
1.11 [28.19]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.16 [29.46]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.10 [27.94]
1.10 [27.94]
1.14 [28.96]
1.14 [28.96]
1.11 [28.19]
1.11 [28.19]
1.09 [27.69]
MAXIMUM LEAD “F”
DIAMETER
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.051 [1.29]
0.051 [1.29]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.045 [1.150]
0.045 [1.150]
0.040 [1.020]
0.036 [0.912]
0.036 [0.912]
0.036 [0.912]
0.032 [0.812]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
0.028 [0.723]
0.025 [0.644]
0.025 [0.644]
0.023 [0.573]
0.023 [0.573]
0.023 [0.573]
0.020 [0.510]
0.018 [0.455]
0.018 [0.455]
0.018 [0.455]
0.016 [0.405]
0.016 [0.405]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.064 [1.63]
0.064 [1.63]
0.064 [1.63]
0.064 [1.63]
0.064 [1.63]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.051 [1.29]
0.045 [1.15]
0.045 [1.15]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.036 [0.912]
0.036 [0.912]
0.032 [0.812]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
0.025 [0.644]
Document Number: 34015
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-4
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-5
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IND. AT 1 kHz
(μH)
3900
4700
5600
6800
8200
10 000
12 000
15 000
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10 000
12 000
15 000
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
Revision: 26-Mar-14
TOL.
(%)
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 20
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 20
± 20
± 20
± 20
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
DCR MAX.
()
0.845
1.140
1.600
1.760
1.950
2.760
3.040
3.390
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.005
0.007
0.007
0.008
0.009
0.010
0.011
0.013
0.015
0.017
0.018
0.022
0.025
0.035
0.040
0.044
0.049
0.070
0.078
0.105
0.115
0.127
0.176
0.195
0.274
0.302
0.338
0.459
0.642
0.699
0.775
0.843
1.150
1.260
1.740
1.920
2.170
0.002
0.002
0.003
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.006
0.006
0.008
0.009
RATED DC CURRENT
(A)
1.6
1.4
1.2
1.1
1.1
0.9
0.9
0.8
36.2
36.2
36.2
36.2
29.5
29.5
29.5
29.5
29.5
25.6
25.6
22.9
19.3
19.3
18.1
17.0
16.2
15.4
14.2
13.2
12.4
12.1
10.9
10.2
8.6
8.1
7.7
7.3
6.1
5.8
5.0
4.8
4.5
3.9
3.7
3.1
2.9
2.8
2.4
2.0
1.9
1.8
1.8
1.5
1.4
1.2
1.2
1.1
43.5
43.5
35.5
35.5
35.5
30.7
30.7
27.5
27.5
25.1
25.1
25.1
21.7
20.5
LEAD “E” SPACING
1.09 [27.69]
1.07 [27.18]
1.05 [26.67]
1.05 [26.67]
1.09 [27.69]
1.07 [27.18]
1.07 [27.18]
1.07 [27.18]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.13 [28.70]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.10 [27.94]
1.08 [27.43]
1.08 [27.43]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
1.12 [28.45]
1.09 [27.69]
1.09 [27.69]
1.07 [27.18]
1.07 [27.18]
1.07 [27.18]
1.05 [26.67]
1.05 [26.67]
1.03 [26.16]
1.10 [27.94]
1.10 [27.94]
1.08 [27.43]
1.06 [26.92]
1.06 [26.92]
1.06 [26.92]
1.06 [26.92]
1.04 [26.42]
1.09 [27.69]
1.07 [27.18]
1.07 [27.18]
1.07 [27.18]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.43 [36.32]
1.53 [38.86]
1.53 [38.86]
MAXIMUM LEAD “F”
DIAMETER
0.025 [0.644]
0.023 [0.573]
0.020 [0.510]
0.020 [0.510]
0.020 [0.510]
0.018 [0.455]
0.018 [0.455]
0.018 [0.455]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.081 [2.05]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.064 [1.63]
0.064 [1.63]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.051 [1.29]
0.051 [1.29]
0.045 [1.15]
0.045 [1.15]
0.045 [1.15]
0.040 [1.02]
0.040 [1.02]
0.036 [0.912]
0.036 [0.912]
0.036 [0.912]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
0.028 [0.723]
0.028 [0.723]
0.025 [0.644]
0.025 [0.644]
0.023 [0.573]
0.023 [0.573]
0.023 [0.573]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
0.102 [2.59]
Document Number: 34015
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB
www.vishay.com
Vishay Dale
STANDARD ELECTRICAL SPECIFICATIONS
IND. AT 1 kHz
(μH)
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10 000
12 000
15 000
18 000
22 000
27 000
33 000
39 000
47 000
MODEL
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
IHB-6
TOL.
(%)
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
± 10
DCR MAX.
()
0.009
0.010
0.014
0.015
0.023
0.025
0.028
0.030
0.040
0.055
0.061
0.068
0.094
0.104
0.143
0.156
0.219
0.241
0.270
0.364
0.498
0.548
0.608
0.671
0.750
1.030
1.160
1.540
1.750
1.940
2.740
3.710
4.160
5.550
6.190
RATED DC CURRENT
(A)
20.5
19.4
16.4
15.9
12.8
12.3
11.6
11.2
9.7
8.3
7.9
7.5
6.3
6.0
5.1
4.9
4.2
4.0
3.7
3.2
2.8
2.6
2.5
2.4
2.2
1.9
1.8
1.6
1.5
1.4
1.2
1.0
1.0
0.8
0.8
LEAD “E” SPACING
1.53 [38.86]
1.53 [38.86]
1.45 [36.83]
1.45 [36.83]
1.41 [35.81]
1.41 [35.81]
1.41 [35.81]
1.41 [35.81]
1.38 [35.05]
1.35 [34.29]
1.35 [34.29]
1.35 [34.29]
1.33 [33.78]
1.33 [33.78]
1.31 [33.27]
1.40 [35.56]
1.37 [34.80]
1.37 [34.80]
1.37 [34.80]
1.34 [34.04]
1.32 [33.53]
1.32 [33.53]
1.32 [33.53]
1.38 [35.05]
1.38 [35.05]
1.35 [34.29]
1.35 [34.29]
1.33 [33.78]
1.33 [33.78]
1.38 [35.05]
1.36 [34.54]
1.33 [33.78]
1.33 [33.78]
1.31 [33.27]
1.34 [34.04]
MAXIMUM LEAD “F”
DIAMETER
0.102 [2.59]
0.102 [2.59]
0.081 [2.05]
0.081 [2.05]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.072 [1.83]
0.064 [1.63]
0.057 [1.45]
0.057 [1.45]
0.057 [1.45]
0.051 [1.29]
0.051 [1.29]
0.045 [1.15]
0.045 [1.15]
0.040 [1.02]
0.040 [1.02]
0.040 [1.02]
0.036 [0.912]
0.032 [0.812]
0.032 [0.812]
0.032 [0.812]
0.032 [0.812]
0.032 [0.812]
0.028 [0.723]
0.028 [0.723]
0.025 [0.644]
0.025 [0.644]
0.025 [0.644]
0.023 [0.573]
0.020 [0.510]
0.020 [0.510]
0.018 [0.455]
0.018 [0.455]
MARKING
- Model
- Value
- Date code
ORDERING INFORMATION
IHB-1
10 μH
± 10 %
EB
e2
MODEL
INDUCTANCE VALUE
INDUCTANCE TOLERANCE
PACKAGE CODE
JEDEC® LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
B
MODEL
Revision: 26-Mar-14
1
E
B
PACKAGE
CODE
1
0
INDUCTANCE
VALUE
0
K
INDUCTANCE
TOLERANCE
Document Number: 34015
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000