IRF-36 www.vishay.com Vishay Dale Inductors, Epoxy Conformal Coated, Axial Leaded FEATURES • High performance ferrite core is used in this epoxy conformally coated choke which allows for inductance values to 1000 μH • Axial lead type, small lightweight design • Special magnetic core structure contributes to high Q and self-resonant frequencies • Treated with epoxy resin coating for humidity resistance to ensure long life ELECTRICAL SPECIFICATIONS Inductance Range: 0.27 μH to 1000 μH • Heat resistant adhesives and special structural design for effective open circuit measurement Inductance Tolerance: ± 10 % from 0.1 μH to 1000 μH standard, ± 5 % optional • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Operating Temperature Range: -20 °C to +105 °C Dielectric Strength: 250 VRMS DIMENSIONS in inches [millimeters] B MECHANICAL SPECIFICATIONS ØC A Terminal Strength: Pull = 5 pounds, twist = 360 °C x 3 Protection: Epoxy uniform roll coated ØD Leads: Tinned copper 1st 4th 2nd 3rd ENVIRONMENTAL SPECIFICATIONS Maximum Temperature Rise: + 20 °C MODEL IRF-36 A (MAX.) B C (MAX.) D 0.394 [10.0] 2.480 ± 0.039 [63.0 ± 1.0] 0.157 [4.0] 0.026 ± 0.002 [0.65 ± 0.05] STANDARD ELECTRICAL SPECIFICATIONS MODEL IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IND. (μH) 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 Revision: 25-May-16 TOL. (%) ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % Q MIN. 25 25 25 25 25 25 45 45 50 50 55 55 60 65 65 70 70 75 70 70 70 70 65 40 55 TEST FREQUENCY (MHz) 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 SRF MIN. (MHz) 250 240 230 220 215 210 172 140 140 131 121 110 100 94 86 80 74 68 53 45 34 20 14 9.9 7.6 DCR MAX. () 0.24 0.28 0.32 0.36 0.41 0.47 0.24 0.24 0.27 0.30 0.32 0.35 0.35 0.35 0.37 0.39 0.43 0.48 0.52 0.58 0.63 0.72 0.77 0.84 0.94 RATED DC CURRENT (mA) 1320 1280 1200 1150 1100 1030 980 920 880 830 790 750 720 670 640 620 590 550 530 500 480 460 430 410 390 Document Number: 34057 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF-36 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 MODEL IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 IRF-36 TOL. (%) ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % ± 5 %, ± 10 % Q MIN. 55 50 45 40 40 35 30 70 70 70 70 65 65 65 60 60 55 55 50 TEST FREQUENCY (MHz) 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 SRF MIN. (MHz) 6.3 6.3 6.3 6.2 5.7 5.3 4.8 3.8 3.5 3.3 3.0 2.8 2.6 2.4 2.25 2.10 1.95 1.85 1.40 DCR MAX. () 1.03 1.12 1.22 1.34 1.47 1.62 1.80 3.7 4.2 4.6 5.1 5.8 6.4 7.0 7.7 8.5 9.4 12.0 17.4 RATED DC CURRENT (mA) 370 350 340 320 306 290 275 185 175 165 155 146 137 133 126 120 113 100 100 ORDERING INFORMATION IRF-36 4.7 μH ± 10 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I R F MODEL Revision: 25-May-16 3 6 E R PACKAGE CODE 4 R INDUCTANCE VALUE 7 K INDUCTANCE TOLERANCE Document Number: 34057 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000