Models VIV and VIH Datasheet

Models VIV and VIH
www.vishay.com
Vishay Dale
Inductors, Variable, Miniature, Radial Leaded
FEATURES
• Classification is grade 2, class B
• Encapsulated in epoxy resin for reliability
• High reliability and exceptional stability over
extreme temperature variations
• Miniature - small lightweight unit in vertical and horizontal
styles to facilitate PC board mounting
ELECTRICAL SPECIFICATIONS
Adjustable Inductance Range: Tunable range: ± 20 % for
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
0.33 μH to 4700 μH. ± 15 % for 0.15 μH to 0.22 μH. 
± 10 % for 0.10 μH. All measurements at + 25 °C on Q-meter
MECHANICAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 125 °C
Tuning Tool: 642867-01 or equal
Self-Resonant Frequency: Minimum SRF measured with
Torque: 0.75 inch-ounces to 5 inch-ounces
grid-dip meter
Terminal Solderability: Meets 5 pound pull test
Core Material: iron
DENSITY SPECIFICATIONS
Weight: 2.6 g maximum
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
VIV-VIH
NOM. IND.
(μH)
TUNABLE
RANGE
Q
MIN.
TEST FREQUENCY
(MHz)
SRF
MIN.
(MHz)
DCR
MAX.
()
RATED DC
CURRENT
(mA)
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
470.0
680.0
1000.0
1500.0
2200.0
3300.0
4700.0
± 10 %
± 15 %
± 15 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
± 20 %
68
80
80
80
80
80
72
56
58
64
60
64
66
52
44
43
41
44
40
40
40
38
36
34
32
32
35
37
38
25
25
25
25
25
25
25
7.9
7.9
7.9
7.9
7.9
7.9
2.5
2.5
2.5
2.5
2.5
2.5
0.79
0.79
0.79
0.79
0.79
0.79
0.25
0.25
0.25
0.258
300
300
300
267
228
190
164
134
108
90
80
64
54
43
14
12
10.5
9.5
8.5
2.4
2.2
1.8
1.5
1.4
1.1
0.90
0.80
0.70
0.60
0.02
0.035
0.04
0.04
0.05
0.07
0.13
0.24
0.30
0.45
0.80
1.1
1.9
3.2
3.4
3.6
4.5
5.5
6.7
11
13
16
18
21
38
54
66
85
99
3500
2600
2500
2500
2200
1850
1350
1000
890
730
550
460
355
270
265
255
230
210
190
150
135
120
115
105
80
65
60
54
49
Revision: 14-Aug-12
Document Number: 34099
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Models VIV and VIH
www.vishay.com
Vishay Dale
DIMENSIONAL CONFIGURATIONS in inches [millimeters]
VIV (Vertical)
VIH (Horizontal)
0.400 ± 0.031
[10.16 ± 0.79]
Dia.
0.400 ± 0.031
[10.16 ± 0.79]
Dia.
0.500 ± 0.031
[12.70 ± 0.79]
1/4 ± 1/32
[6.35 ± 0.794]
1/4 ± 1/32
[6.35 ± 0.794]
11/32 ± 1/32
[8.73 ± 0.794]
11/32 ± 1/32
[8.73 ± 0.794]
0.500 ± 0.031
[12.70 ± 0.79]
0.300 ± 0.031
[7.62 ± 0.79]
Mounting Plate Data
VIV (Vertical)
Mounting Plate Data
VIH (Horizontal)
0.150
[3.81]
R
Start
0.300
[7.62]
R
Finish
Start
Dummy
Finish
Dummy
0.500
[12.70]
Tuning Tool Number 642867-01
0.125
[3.18]
0.095
[2.41]
0.031
[0.79]
PART MARKING
- Manufacturer data printed
ORDERING INFORMATION
VIV
0.10 μH
MODEL
INDUCTANCE VALUE
10 %
EB
e2
INDUCTANCE TOLERANCE
PACKAGE
CODE
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
V
I
MODEL
Revision: 14-Aug-12
V
E
B
PACKAGE
CODE
R
1
INDUCTANCE
VALUE
0
K
INDUCTANCE
TOLERANCE
Document Number: 34099
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000