WVL Vishay Dale Inductors, Variable, Subminiature, Shielded, Radial Leaded FEATURES • • • • • • • ELECTRICAL SPECIFICATIONS Adjustable Inductance Range: Tunable range; ± 5 % for 0.10 μH to 1 μH. ± 10 % for 1.2 μH to 1000 μH Dielectic Strength: 840 VRMS at sea level Working Voltage: 300 VDC Maximum Current: Based on temperature rise not to exceed 15 °C at + 90 °C ambient Incremental Current: The DC current required to cause a five percent reduction in the nominal inductance value Operating Temperature: - 55 °C to + 105 °C DENSITY SPECIFICATIONS Weight: 1.5 g maximum Shielding: 3 % coupling maximum when two units are tested side by side Classification is grade 3, class A Subminiature shielded adjustable inductor High Q values Vertical or horizontal mounting Inductance range is 0.10 μH to 1000 μH 0.300" [7.62 mm] diameter by 0.400" [10.16 mm] length Printed board mounting facilitated by 0.200" [5.08 mm] grid spacing • Unit has shield construction to allow maximum density packaging • Accommodates close inductance adjustments in high density circuits that demand exceptional stability and high “Q” in the smallest size available • Compliant to RoHS Directive 2002/95/EC MECHANICAL SPECIFICATIONS Tuning Tool: Use number WVL-T or equal Torque: 0.40 inch-ounces to 6 inch-ounces Terminal Pull: 3 pounds DIMENSIONS in inches [millimeters] Horizontal Style Vertical Style 0.400 [10.16] 0.300 ± 0.020 [7.62 ± 0.508] 0.320 [8.13] 0.400 ± 0.030 [10.16 ± 0.762] 0.020 [0.508] Dia. Wire Phosphor-Bronze 3/8 ± 1/16 [9.52 ± 1.59] 3/8 ± 1/16 [9.52 ± 1.59] 0.200 ± 0.010 [5.08 ± 0.254] 0.375 [9.53] #24 0.020 ± 0.002 [0.508 ± 0.051] TCW 0.050 [1.27] 0.200 ± 0.010 [5.08 ± 0.254] Horizontal Mounting Clip Part Number ACS-57 (One required per unit.) STANDARD ELECTRICAL SPECIFICATIONS MODEL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL IND. (μH) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 TOL. Q (%) TYP. ±5 56 ±5 56 ±5 56 ±5 56 ±5 56 ±5 64 ±5 64 ±5 64 ±5 64 ±5 64 ±5 64 ±5 68 Document Number: 34086 Revision: 05-May-11 TEST FREQUENCY (MHz) 25 25 25 25 25 25 25 25 25 25 25 25 SRF NOM. (MHz) 200 200 200 200 200 200 200 200 184 176 150 144 DCR MAX. () 0.030 0.030 0.030 0.035 0.038 0.040 0.040 0.045 0.045 0.050 0.055 0.060 RATED DC CURRENT (mA) 1510 1450 1400 1370 1340 1300 1260 1240 1200 1160 1100 1040 For technical questions, contact: [email protected] INCREMENTAL CURRENT (mA) www.vishay.com 67 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WVL Inductors, Variable, Subminiature, Shielded, Radial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MODEL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL WVL IND. TOL. Q (μH) (%) TYP. 1.0 ±5 68 1.2 ± 10 72 1.5 ± 10 80 1.8 ± 10 92 2.2 ± 10 88 2.7 ± 10 88 3.3 ± 10 77 3.9 ± 10 72 4.7 ± 10 76 5.6 ± 10 76 6.8 ± 10 68 8.2 ± 10 76 10 ± 10 72 12 ± 10 96 15 ± 10 96 18 ± 10 92 22 ± 10 100 27 ± 10 92 33 ± 10 96 39 ± 10 96 47 ± 10 88 56 ± 10 92 68 ± 10 84 82 ± 10 84 100 ± 10 76 120 ± 10 76 150 ± 10 72 180 ± 10 76 220 ± 10 76 270 ± 10 80 330 ± 10 80 390 ± 10 80 470 ± 10 80 560 ± 10 76 680 ± 10 80 820 ± 10 72 1000 ± 10 80 TEST FREQUENCY (MHz) 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 SRF NOM. (MHz) 128 136 124 108 96 83 74 70 63 58 50 48 43 30 23 19 17 16 15 14 12 11 10 9 8.4 4.5 4.0 3.9 3.7 3.4 2.8 2.7 2.6 2.3 2.2 2.0 1.9 DCR MAX. () 0.070 0.085 0.100 0.110 0.120 0.125 0.165 0.180 0.245 0.265 0.330 0.460 0.640 0.800 0.865 0.940 1.03 1.18 1.30 1.41 1.61 2.08 2.20 2.42 2.15 2.38 2.52 2.88 3.18 3.50 4.80 5.44 5.90 6.30 7.20 8 12 RATED DC CURRENT (mA) 986 968 893 853 817 800 696 659 571 550 493 417 359 316 301 292 267 243 231 223 203 191 185 174 333 316 306 288 273 260 222 209 201 194 181 172 141 INCREMENTAL CURRENT (mA) 333 190 175 150 125 120 110 105 100 90 80 70 65 MARKING - Manufacturer data printed ORDERING INFORMATION - VERTICAL STYLE WVL 0.10 μH 5% EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER - VERTICAL STYLE W V L 9 MODEL E B R PACKAGE CODE 1 0 J INDUCTANCE VALUE INDUCTANCE TOLERANCE ORDERING INFORMATION - HORIZONTAL STYLE WVL-H 0.10 μH 5% EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER - HORIZONTAL STYLE W V L MODEL www.vishay.com 68 9 E B PACKAGE CODE R 1 INDUCTANCE VALUE 0 J H INDUCTANCE TOLERANCE SPECIAL For technical questions, contact: [email protected] Document Number: 34086 Revision: 05-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000