Customer Customer Ref. Project Ref Description Prototype Ref. Current Transformer 35 A 1:100 Ordering Code CSAU-100 CSAU-100 Date 10/03/10 Edition 1 Page 1/3 RoHS 2002/95/EC 1- Dimensions 8.5 Max 18 3 0,9 3 ax M .5 17 Side View Top View 45° 3,81 1 2 18,8 7 12,7 3,05 4 Recommended PCB Layout. View in Mounting Direction Notes. - Tolerances ± 0,25 mm - Pin 3 and 8 not connecting for ensure creepage security distances. - Coplanarity < 100u Notes: Specification are subjetced to change without notice DIMENSIONS IN: mm TECHNICAL SPECIFICATION Customer Customer Ref. Project Ref Prototype Ref. CSAU-100 Description Current Transformer 35 A 1:100 Ordering Code Date CSAU-100 Edition 10/03/10 1 Page 2/3 RoHS 2002/95/EC 2- Electrical Parameters Parameter Value Application Current Transformer Work Frequency 100 to 250 kHz Typical Value 200 kHz Nominal RMS Current 35 A RMS Wave Form Expected Peak-Current-Sense in the primery side of a DCDCConverter for HEV Turns Ratio 1 : 100 Secondary Inductance 4 to 12 mH (at 100kHz 100mVac) Primary Resistance ( at 25 ºC ) < 1 mOhm Typical 0.50 mOhm Secondary Resistance ( at 25 ºC ) <1 Ω Typical 0.8 mOhm P to S Capacitance at 100kHz 100mV a < 7 pF Typical 4.5 pF Hi-Pot Primar to Secondary 3kVDC 1' ( 1mA current allowed) Primar to Core 3kVDC 1' ( 1mA current allowed) Secondary to Core 500 VDC 1' ( 1mA current allowed) Temperature Behavior Operating Temperature ( including Self-Heating) - 40 to 155ºC Storage Temperature - 55 to 155ºC Notes: Specification are subjetced to change without notice DIMENSIONS IN: mm TECHNICAL SPECIFICATION Customer Customer Ref. Project Ref Description Prototype Ref. Current Transformer 35 A 1:100 Ordering Code CSAU-100 Date CSAU-100 10/03/10 Edition 1 Page 3/3 RoHS 2002/95/EC 3- Electrical Diagram 4 1 Pri 1 Turn Sec 100 Turns 7 2 4- Marking The Transformer is marked on the top surface as follows: CSAU-100 PREMO XX/YY XX: Week YY: Year 5- Standards. The current transformer is designed according to following standards: - RoHS directive - AECQ-200 6- Packaging - Type = Tape and reel - Pieces per Real = 250pcs Notes: Specification are subjetced to change without notice DIMENSIONS IN: mm TECHNICAL SPECIFICATION