Specification Sheet

DVC500 Series
DC/DC AUTOMOTIVE CONVERTER
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
500W Automotive and Vehicle Converter
Designed for use in rough environment
Rugged construction / potted device
Protection against unfavourable environmental conditions
DC/DC wide range input
Filtered against vehicle on-board disturbances
Galvanic separation 1.5kV
Design acc. to EN60950. EN50155. EN1175. ISO20898
Regulated output
Very high efficiency
Short-circuit / No-load protection
Over Temperature protection
Parallel connectable (Option: Smart output characteristics)
SPECIFICATIONS
INPUT
STANDARDS & APPROVALS
Input voltage
36V, 48V, 72V, 96V, 110V
Safety
EN60950, EN50155, EN1175, ISO20898
Input range
See selection table
EMC
EN61204-3
Filtering
Filtering against on board disturbances
PROTECTION
OUTPUT
Protective degree
IP67 (not connector)
Output voltage
12.5Vdc, 13.8Vdc, 24.3Vdc
Reverse polarity Protection
External input fuse is blown.
Output Voltage Tolerance
+/- 1%
Over temperature Protection
Protective shut down, self reset after cool down.
Output Current
See Selection Table
Insulation
Input to Output: 1.5kV
Input to Case: 1.5kV
Ouput to Case: 500V
Over voltage Protection
Protective shut down
Self reset after cool down.
Safety Note
If an external energy source (e.g battery) is
connected to the output of the converter, the
supply line (+pole)must be fused close by the
source. Recommended fusing: 1.1.. 1.2 x Inom
Current Limiting
Typically 1.1 x I nominal
Load Regulation
+/-0.5% (Typ 0.3% = 80mV) 10-90% load
Regulation time
<1 ms
Line regulation
±0.1%
Temperature drift
-25C to +70C <1%
Ripple & noise
100mVp-p
Efficiency
92% Typical
MECHANICAL
Parallel Operation
Unlimited, 100% redundancy
requires external diodes
Connectors
Input: +Uin (M5) / -Uin(M8)
Output: +Uout (M6) / -Uout(M8)
Dimensions
222(220) x 166(122) x 71(47)mm
Weight
2.65Kg
Case Material
Aluminium
ENVIRONMENT
Ambient temperature
-40°C to 75°C with derating,
Max baseplate temperature 100°C
Storage temperature
-40°C to 85°C
Humidity
100% relative humidity, dewing permitted.
Cooling
Natural convection / cooling
via contact to mounting surface.
www.powerbox.com.au - 1800 251 380
www.powerbox.co.nz - 0800 104 480
Doc. No. DVC500 Rev.D 25-11-15
DVC500 Series
DC/DC AUTOMOTIVE CONVERTER
SELECTION TABLE
MODEL
INPUT VOLTAGE
OUTPUT VOLTAGE
OUTPUT CURRENT
POWER
DVC500-36-24
36VDC (25-70VDC)
24VDC
21A
500W
DVC500-48-12
48VDC (33-90VDC)
12.5VDC
40A
500W
DVC500-48-13.8
48VDC (33-90VDC)
13.8VDC
36A
500W
DVC500-48-24
48VDC (33-90VDC)
24VDC
21A
500W
DVC500-48-28.8
48VDC (41-80VDC)
28.8VDC
17.4A
500W
DVC500-80-12
72/80/96/110VDC (56-154VDC)
12.5VDC
40A
500W
DVC500-80-13.8
72/80/96/110VDC (65-154VDC)
13.8VDC
36A
500W
DVC500-80-24
72/80/96/110VDC (56-154VDC)
24VDC
21A
500W
TECHNICAL ILLUSTRATIONS
www.powerbox.com.au - 1800 251 380
www.powerbox.co.nz - 0800 104 480
Doc. No. DVC500 Rev.D 25-11-15