MVW, HVW, HVX www.vishay.com Vishay Dale Carbon Film (Metal Alloy) Resistors, Special Purpose, High Voltage FEATURES • HVW and MVW are uncoated; HVX (blue flameproof coating) available on request • High voltage (up to 15 kV) • Semi-precision: ± 5 %, ± 10 %, ± 20 % • Axial leads: HVW, HVX = Tinned copper MVW = Copper clad steel MATERIAL SPECIFICATIONS Element: Metal alloy • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Core: Alkaline earth porcelain Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P70 °C W MAXIMUM WORKING VOLTAGE (2) V RESISTANCE RANGE (2) TOLERANCE ±% HVW1/2 HVW-1/2 1.0 3.5K 1K to 25M 5, 10, 20 HVX1/2 HVX-1/2 1.0 3.5K 1K to 25M 5, 10, 20 MVW1/2 MVW-1/2 1.0 3.5K 1K to 25M 5, 10, 20 HVW3/4 HVW-3/4 1.5 7.5K 1K to 50M 5, 10, 20 HVX3/4 HVX-3/4 1.5 7.5K 1K to 50M 5, 10, 20 MVW3/4 MVW-3/4 1.5 7.5K 1K to 50M 5, 10, 20 HVW001 HVW-1 2.5 7.5K 1K to 75M 5, 10, 20 HVX001 HVX-1 2.5 7.5K 1K to 75M 5, 10, 20 HVW002 HVW-2 5.0 15.0K 1K to 200M 5, 10, 20 HVX002 HVX-2 5.0 15.0K 1K to 200M 5, 10, 20 Notes (1) All resistance values are calibrated at 100 V . Calibration at other voltages upon request. DC (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: HVW00126K40KLB (preferred part numbering format) H V W 0 0 1 2 6 K 4 0 K L B GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE (3)(4) SPECIAL (See Standard Electrical Specifications table) K = kΩ M = MΩ 1K000 = 1.0 kΩ 47K00 = 47 kΩ 200M0 = 200 MΩ J=±5% K = ± 10 % M = ± 20 % EL = Lead (Pb)-free, lacer EK = Lead (Pb)-free, bulk EE = Lead (Pb)-free, reel Blank = Standard (Dash Number) (up to 3 digits) From 1 to 999 as applicable LB = Tin/lead, lacer BJ = Tin/lead, bulk RC = Tin/lead, reel Historical Part Numbering: HVW-126.4K10 % (will continue to be accepted) HVW-1 HISTORICAL MODEL 26.4 K RESISTANCE VALUE 10 % TOLERANCE CODE L05 PACKAGING Notes (3) MVW products do not contain lead. Use tin/lead packaging codes to specify these lead free MVW products. Use lead (Pb)-free packaging codes to specify lead (Pb)-free HVW and HVX products. (4) Some packaging codes are model specific. • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 21-Nov-12 Document Number: 31036 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MVW, HVW, HVX www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) HVW/MVW (Uncoated) HVX (Silicone coated) 1.50 ± 0.125 (38.10 ± 3.18) 1.50 ± 0.125 (38.10 ± 3.18) C A C A B D DIMENSIONS HVW/MVW C GLOBAL MODEL A (Max.) B (Max.) C D (Max.) HVW1/2 0.545 ± 0.015 (13.84 ± 0.38) 0.032 ± 0.002 (0.81 ± 0.05) 0.155 (3.94) HVX1/2 0.651 (16.54) 0.680 (17.27) 0.032 ± 0.002 (0.81 ± 0.05) 0.180 (4.57) MVW1/2 0.545 ± 0.015 (13.84 ± 0.38) 0.032 ± 0.002 (0.81 ± 0.05) 0.155 (3.94) HVX3/4 0.988 (25.10) 1.062 (26.97) 0.032 ± 0.002 (0.81 ± 0.05) 0.180 (4.57) HVW3/4 0.895 ± 0.010 (22.73 ± 0.25) 0.032 ± 0.002 (0.81 ± 0.05) 0.155 (3.94) HVX001 0.988 (25.10) 1.062 (26.97) 0.032 ± 0.002 (0.81 ± 0.05) 0.310 (7.87) MVW3/4 0.895 ± 0.010 (22.73 ± 0.25) 0.032 ± 0.002 (0.81 ± 0.05) 0.155 (3.94) HVX002 2.150 (54.61) 2.200 (55.88) 0.032 ± 0.002 (0.81 ± 0.05) 0.310 (7.87) HVW001 0.920 ± 0.020 (23.37 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05) 0.275 (6.99) HVW002 2.080 ± 0.030 (52.83 ± 0.76) 0.032 ± 0.002 (0.81 ± 0.05) 0.275 (6.99) 100 75 50 RATED TEMPERATURE A DIMENSIONS HVX D (Max.) RATED POWER IN % GLOBAL MODEL D 25 0 70 100 DERATING 200 300 AMBIENT TEMPERATURE IN °C Note • For operation in oil or inert atmosphere derating, consult factory PACKAGING PACKAGING CODE GLOBAL MODEL PACKAGING TYPE BULK n/a BJ MVW1/2, MVW3/4 TAPE/REEL n/a RC LACER n/a LB BULK BJ EK TAPE/REEL RC EE LACER LB EL LACER LB EL HVW1/2, HVW3/4, HVX1/2, HVX3/4 HVW001, HVW002, HVX001, HVX002 Revision: 21-Nov-12 LEAD (Pb)-BEARING LEAD (Pb)-FREE Document Number: 31036 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000