Packaging Vishay BULK PACK MODEL B H G 206 225 [8.858] 140 [5.512] 70 [2.756] 100 G 207 225 [8.858] 140 [5.512] 70 [2.756] 100 Z 307 225 [8.858] 140 [5.512] 70 [2.756] 200 KKA 4 262 100 [10.315] [3.937] 35 [1.378] 200 KKA 5 260 115 [10.236] [4.528] 35 [1.378] 200 KKA 7 235 [9.252] 44 [1.732] 200 L B 130 [5.118] TAPE DIMENSIONS M K T H 235 [9.252] 130 [5.118] 44 [1.732] 100 181 [7.126] 126 [4.961] 33 [1.299] 200 235 [9.252] 130 [5.118] 44 [1.732] 200 KKE 11 238 [9.370] 166 [6.535] 43 [1.693] 200 KKE 17 255 105 [10.039] [4.134] 40 [1.575] 100 60 [2.362] 200 KKA 9 KKA 11 KKE 4 KKE 7 KKE 9 KKE 7 Si 235 KKE 9 Si [9.252] 129 [5.079] A K M T G 53 Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] G 63 63 ± 1 [2.480 ± 0.039] 5 ± 0.5 [0.197 ± 0.020] Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] G 73 73 ± 1 [2.874 ± 0.039] 5 ± 0.5 [0.197 ± 0.020] Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] G 80 80 ± 1 [3.150 ± 0.039] 10 ± 0.5 [0.394 ± 0.020] Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] G 83 83 ± 1 [3.268 ± 0.039] 10 ± 0.5 [0.394 ± 0.020] Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] G 88 88 ± 1 [3.465 ± 0.039] 10 ± 0.5 [0.394 ± 0.020] Lmax. + 1.4 Lmax. + [0.055] 1.2 [0.047] 6 ± 0.5 [0.236 ± 0.020] AMMOPACK MODEL TAPE DIMENSIONS UNITS in millimeters [inches] PER PACK L B H MODEL TAPE DIMENSIONS UNITS in millimeters [inches] PER PACK L B H G 53 324 82 49 [12.756] [3.228] [1.929] 500 Z 303 G 83 324 111 90 [12.756] [4.370] [3.543] 500 G 73 324 101 49 [12.756] [3.976] [1.929] 500 Z 305 G 83 324 111 75 [12.756] [4.370] [2.953] 250 G 204 G 88 324 111 75 [12.756] [4.370] [2.953] 250 Z 306 G 80 324 111 75 [12.756] [4.370] [2.953] 250 Z 301 G 53 324 82 49 1000 [12.756] [3.228] [1.929] CW-2B324 111 75 G 80 13 [12.756] [4.370] [2.953] 500 ZDA 0411 G 73 324 101 64 1000 [12.756] [3.976] [2.520] G 53 324 82 49 [12.756] [3.228] [1.929] 500 G 83 324 111 75 [12.756] [4.370] [2.953] 500 G 202 H B Z 302 Document Number: 21029 Revision: 05-Sep-06 B 5 ± 0.5 [0.197 ± 0.020] Lmax. see data sheets L L B T Taping corresponds to IEC 60286 UNITS PER PACK 53 ± 1 [2.087 ± 0.039] B A DIMENSIONS in millimeters [inches] MODEL DIMENSIONS in millimeters [inches] TAPE Lmax. UNITS PER PACK L H H DIMENSIONS in millimeters [inches] For technical questions in europe, contact: [email protected] For technical questions in americas/asia, contact: [email protected] www.vishay.com 181 Packaging Vishay AMMOPACK (continued) H DIMENSIONS in millimeters [inches] UNITS PER PACK MODEL ZDV 0411 L B H 324 [12.756] 53 [2.087] 147 [5.787] Ordering term of model ZDA0411 changes to L 2000 ZDV 0411 when radial taped B REEL PACK REEL DIMENSIONS in millimeters [inches] MODEL TAPE R 53 (1) G 202 R 73 (1) d G 204 R 88 Z 301 R 53 ZDA 0411 R 73 R 53 (1) B C A Z 302 R 83 R 53 (1) Z 303 R 83 Z 305 R 83 Z 306 R 83 KKA 4 R 80 KKA 5 R 80 R 53 CW-2B-13 R 63 R 80 d A B C 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 20 [0.787] 26.5 [1.043] 26.5 [1.043] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 14 [0.551] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 250 [9.843] 330 [12.992] 330 [12.992] 280 [11.024] 280 [11.024] 190 [7.480] 280 [11.024] 280 [11.024] 190 [7.480] 280 [11.024] 280 [11.024] 190 [7.480] 75 [2.953] 95 [3.740] 105 [4.134] 75 [2.953] 95 [3.740] 75 [2.953] 105 [4.134] 75 [2.953] 75 [2.953] 105 [4.134] 105 [4.134] 95 [3.740] 95 [3.740] 73 [2.874] 73 [2.874] 73 [2.874] 85 [3.346] 85 [3.346] 85 [3.346] 101 [3.976] 101 [3.976] 101 [3.976] 87 [3.425] 107 [4.213] 117 [4.213] 87 [3.425] 107 [4.213] 87 [3.425] 117 [4.213] 87 [3.425] 87 [3.425] 117 [4.213] 117 [4.213] 101 [3.976] 101 [3.976] 87 [3.425] 87 [3.425] 81 [3.189] 93 [3.661] 93 [3.661] 93 [3.661] 115 [4.528] 115 [4.528] 108 [4.252] PACKAGING UNIT (pieces) 1000 1000 500 2000 2000 2000 1000 1000 1000 500 500 1000 1000 1250 1000 500 1250 1000 500 1250 1000 500 Note: (1) Dimension A in tape dimensions is 10 ± 0.5 mm [0.394 ± 0.020] www.vishay.com 182 For technical questions in europe, contact: [email protected] For technical questions in americas/asia, contact: [email protected] Document Number: 21029 Revision: 05-Sep-06 Packaging Vishay VISHAY DRALORIC PACKAGING CODE Note: This packaging code is valid only for VISHAY DRALORIC resistors 1st digit (Packaging Style) A Ammo Pack R Reel L Loose pack B Embossed tape (Blister) P Paper tape M Bulk case (Murata) X Sample A 100 B 250 C 500 D 50 E 2500 F 25 G 40 H 60 I J 200 K 300 L 400 M 1250 N 20 000 O P EXAMPLE: A2 P0 Ammopack Papertape 1500 Q 2000 pieces 10 000 pieces 2nd digit (Quantity) R 5000 (R26) S 7500 T 30 000 U 25 000 V W X Without quantity Y Z 50 000 1 1000 2 2000 3 3000 4 4000 5 5000 6 7 8 9 0 Document Number: 21029 Revision: 05-Sep-06 For technical questions in europe, contact: [email protected] For technical questions in americas/asia, contact: [email protected] 10 000 www.vishay.com 183 Packaging Vishay LACER PACK WIREWOUND LACER PACKAGING Dimensions in mm [inches] MODEL A B CARD PACK A B RS-1/4, RS-1/2, G-1, G-2, CW-1/2, EGS-1, EGS-2, RS-1A, RS-1B, G-3, CW-1, CW-1M, EGS-3, NS-1A, LVR-1 215.90 [8.500] 95.25 [3.750] RS-2B, RS-2M, CW-2B, CW-2M, G-5, ESS-2B, LVR-3, RS-2, RS-2C, CW-2C, G-5C 215.90 [8.500] 101.6 [4.000] RS-5, RS-7, CW-5, ESS-5, CW-7, G-10, EGS-10, LVR-5 279.40 [11.000] 127.00 [5.000] RS-10, CW-10, ESS-10, LVR-10 376.24 [14.813] 153.99 [6.063] Resistor body is placed in slot, held in place with tongue insert. Terminals protected within folder. 20 units per folder. WIREWOUND CARD PACKAGING MODEL BULK PACK QTY./PACK TEAR OFF QTY. RH-5, NH-5, ERH-5, ENH-5 40 10 RH-10, NH-10, ERH-10, ENH-10 40 10 RH-25, NH-25, ERH-25, ENH-25 20 5 RH-50, NH-50, ERH-50, ENH-50 20 5 Resistor placed in slot and held in place with foldover protective paper. Each pack perforated to tear off into four smaller sub packs. WIREWOUND BULK PACKAGING Dimensions in mm [inches] MODEL A B C D E F RS-1/8, RS-1/4, RS-1/2, RS-1M, CW-1/2, G-1, G-2, EGW-1, EGS-2, EGW-2 25.4 [1.000] 25.4 [1.000] 92.1 [3.625] 57.1 [2.250] 95.2 [3.750] 136.5 [5.375] RS-1A, RS-1B, CW-1, EGW-3 38.1 [1.500] 38.1 [1.500] 92.1 [3.625] 127 [5.000] 98.4 [3.875] 196.8 [7.750] RS-2, RS-2A, CW-2, G-5A, ESS-2A 76.2 [3.000] 57.1 [2.250] 104.7 [4.125] 152.4 [6.000] 184.2 304.8 [7.250] [12.000] RS-2B, RS-2M, CW-2B, G-5, ESS-2B, LVR-3 50.8 [2.000] 50.8 [2.000] 98.4 [3.875] 152.4 [6.000] 184.2 304.8 [7.250] [12.000] RS-2C, CW-2C, G-5C 66.8 [2.625] 63.5 [2.500] 101.6 [4.000] 152.4 [6.000] 184.2 304.8 [7.250] [12.000] RS-5, CW-5, G-10, ESS-5, EGW-10, LVR-5 76.2 [3.000] 88.9 [3.500] 107.9 [4.125] 152.4 [6.000] 184.2 304.8 [7.250] [12.000] RS-7, CW-7 98.4 [3.875] 63.5 [2.500] 117.4 [4.625] 190.5 [7.500] 190.5 393.7 [7.500] [15.500] RS-10, CW-10, ESS-10 101.6 [4.000] 101.6 [4.000] 133.3 [5.250] 247.6 304.8 368.3 [9.750] [12.000] [14.500] Unit box A C B D E F Intermediate box Axial units are uniformly packaged 100 per box with 10 units per immediate container. Standard packaging for quantities of 300 and fewer. www.vishay.com 184 For technical questions in europe, contact: [email protected] For technical questions in americas/asia, contact: [email protected] Document Number: 21029 Revision: 05-Sep-06 Packaging Vishay MILITARY AND SPECIAL PACKAGING AMMOPACK SKIN PACK Resistors are lead taped, the same as in Reel Pack (see page), then they are placed in a continuous “S” pattern (without paper inner leaf) in an appropriate box. A versatile packaging method. Units are placed on double-faced corrugated board, then skin packed to board with polyfilm. Most resistor types are in multiples of five with insert strips. REEL PACK VISHAY DALE STANDARD PACKAGING TECHNIQUE WIREWOUND REEL PACKAGING Dimensions in mm [inches] MAXIMUM UNITS PER REEL PITCH (1) TAPE SPACING (2) 5000 5.08 [0.200] 52.37 [2.063] 1500 4500 5.08 [0.200] 52.37 [2.063] NS-1A, LVR-1 1000 4000 5.08 [0.200] 52.37 [2.063] CA-1, CA-2 (3) 1350 2500 5.08 [0.200] 73.02 [2.875] RS-2B, RS-2M, CW-2B, CW-2M, G-5, ESS-2B 400 1200 10.16 [0.400] 63.5 [2.500] LVR-3 400 1000 10.16 [0.400] 63.5 [2.500] RS-2, RS-2C, CW-2C, G-5C 400 1000 10.16 [0.400] 63.5 [2.500] RS-5, RS-7, CW-5, ESS-5, CW-7, G-10, EGS-10 - 700 10.16 [0.400] 73.02 [2.875] LVR-5 - 600 10.16 [0.400] 73.02 [2.875] RS-10, CW-10, ESS-10 - 600 10.16 [0.400] 85.72 [3.375] SMALL FLANGE “B” 190.50 [7.500] LARGE FLANGE “A” 281.78 [11.094] RS-1/4, RS-1/2, G-1, G-2, CW-1/2, EGS-1, EGS-2 2000 RS-1A, RS-1B, G-3, CW-1, CW-1M, EGS-3 MODEL Note 1 A B 14.29 to 15.88 [0.563 to 0.625] Hole Military packaging per MIL-P-116, Method 1A8. Blister pack, foam pack and vial pack also available for special requirements. Notes (1) Leads will be trimmed to a maximum of 1.59 mm [0.063"] beyond tape edge (2) For non standard type and reel requirements, contact our engineering department, see email address at the bottom of the page (3) CA-1 and CA-2 will be taped at 0.200 pitch, 73.02 mm [2.875"] tape space without lead trim. CA-4000 and CA-5000 series will be taped at 0.200 pitch, tape space varies by body length Document Number: 21029 Revision: 05-Sep-06 For technical questions in europe, contact: [email protected] For technical questions in americas/asia, contact: [email protected] www.vishay.com 185