Inductive sensors IFR 10.82E05 Inductive sensors NAMUR ø 0,6 6 ø 10 6,6 dimension drawing 5,08 general data photo mounting type flush nominal sensing distance Sn 2 mm approvals/certificates ATEX 3G electrical data switching frequency < 2 kHz normal operating voltage 8,2 VDC voltage supply range +Vs 5 ... 30 VDC current consumption undamped > 4 mA current consumption damped < 1 mA current consumption max. (no load) 10 mA output circuit NAMUR residual ripple < 10 % Vs connection diagram mechanical data type cylindrical smooth housing material PBT dimension 10 mm housing length 6,6 mm connection types pins NAMUR (+) (-) RL +VS 0V ambient conditions operating temperature -25 ... +75 °C protection class IP 67 safe maximum values marking II 3G Ex ic IIC T5 Gc X current Ii < 20 mA voltage Ui < 13 VDC power Pi < 0,065 W internal capacitance Ci < 100 nF internal inductance Li < 0,1 mH operating temperature Ta (temp. class T5) -20 ... +60 °C circuit board mountable www.baumer.com 12/6/2015 Inductive sensors IFR 10.82E05 Inductive sensors NAMUR Safe maximum values Marking Operating temperature Ta (Temp. T5) II 3G Ex ic IIC T5 Gc X -20 ... +60 °C Special conditions “X” • Device and connection cable must be installed so that they are protected from UV light www.baumer.com 12/6/2015