UV-VIS HIGH POWER UV-VIS LIGHT FIBER LIGHT SOURCE SOURCE L10290 OVERVIEW The L10290 is a newly developed UV-visible fiber light source that outputs 200 nm to 1600 nm light through a light guide (sold separately). Using a "high brightness lamp", the L10290 provides twice radiant intensity that of conventional models. Besides a compact size and light weight that make it simple to carry, the L10290 is specifically designed for easy use. These features make the L10290 ideal for all types of portable devices. ∗ Light guide is sold separately. FEATURES SPECTRAL DISTRIBUTION (TYPICAL DATA) ●High Output: Twice Intensity TLSOB0099EB 10 L10290 WHEN TUNGSTEN-HALOGEN LAMP WITH MAX. VOLTAGE L10290 WHEN TUNGSTEN-HALOGEN LAMP WITH MIN. VOLTAGE CONVENTIONAL MODEL (Compared to Conventional Model) Twice intensity RELATIVE IRRADIANCE ●High Stability: Fluctuation 0.004 %p-p Typ. (Equivalent to 2 × 10-5 A.U.) ●Long Life Lamp: 2000 Hours ●External Control ●Shutter Function ●Filter Holder (Sold Separately) (compared to conventional model) 1 LIGHT GUIDE A7969-08AS CORE DIA.= 0.8 mm 0.1 200 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (nm) ■HAMAMATSU ABSORBANCE (10-5 A.U.) ●Spectrophotometry ●Environmental Measurement ●Absorption Spectrum Measurement ●Microtiter Plate Reader ●Pharmaceutical Testing ●Film Thickness Measurement ●Semiconductor Inspection ●Optical Component Inspection LIGHT OUTPUT STABILITY (at 230 nm) 20 15 0.012 % 10 5 0 -5 -10 -15 -20 ■Other manufacturer ABSORBANCE (10-5 A.U.) APPLICATIONS TIME (60 s/div.) 20 15 0.012 % 10 5 0 -5 -10 -15 -20 TIME (60 s/div.) TLSOB0059EB SPECIFICATIONS LIGHT GUIDE Type No. A7969-02AS 6 A7969-06AS 6 A7969-08AS 6 Core Diameter 0.2 mm 0.6 mm 0.8 mm Length 1.0 m UV RESISTANT CHARACTERISTICS (at 215 nm) 120 TLSOB0094ED 100 A7969-02AS A7969-06AS A7969-08AS 80 60 40 STANDARD TYPE 20 0 0 50 100 NOTE: 1The deuterium lamp (200 nm to 400 nm) and tungsten halogen lamp (400 nm to 1600 nm) can each radiate light separately. 2Tungsten halogen lamp intensity is adjustable within a range of ±20 %. 3The deuterium lamp and tungsten halogen lamp can each be turned on or off separately. 150 200 250 300 350 400 450 OPERATION TIME (h) FILTER HOLDER (SOLD SEPARATELY) REPLACEMENT LAMP Type No. L10295 L10296 (SOLD SEPARATELY) NOTE: 5Other shapes and combinations are available upon request. 6UV resistant light guide. TRANSMITTANCE (%) Specifications 200 nm to 1600 nm 1 High Brightness Deuterium Lamp Built-in Lamp 9 W Tungsten Halogen Lamp 2 Output Fluctuation (Typ.) 0.004 % p-p (Equivalent to 2 × 10-5 A.U.) Stability Drift (Max.) ±0.3 %/h 100 V to 240 V (100 V/200 V Auto Switching) Input Voltage (AC) Single Phase 50 Hz/60 Hz Power Consumption (Max.) 140 VA Approx. 4 kg Weight SMA905D Light Guide Connector Included Shutter Lamp ON/OFF 3 Shutter open/close External Control Status Signal for Lamp ON/OFF and Main Power ON/OFF Main Power ON/OFF Main Unit Switch Lamp ON/OFF 3 Shutter open/close Applicable Standard CE Marking Parameter Spectral Distribution 5 Lamp Lamp Life 4 High Brightness Deuterium Lamp 2000 h 9 W Tungsten Halogen Lamp 2000 h NOTE: 4Guaranteed life. Defined as the time when the radiant intensity falls to 50 % of its initial value. Type No. A10394 Applicable Filter 3 mm thick, 1 inch dia. or 1 × 1 inch Filters should be prepared by the user. When attaching a filter holder, remove the cover and insert the filter holder into the lamp house. DIMENSIONAL OUTLINES (Unit: mm) LIGHT GUIDE CONNECTOR (SMA905D) TRIMMER VOLUME FOR TUNGSTEN HALOGEN LAMP MAIN POWER INDICATOR LAMP INDICATOR UPPER: DEUTERIUM LAMP LOWER: TUNGSTEN HALOGEN LAMP SHUTTER INDICATOR TOP VIEW LAMP SWITCH UPPER: DEUTERIUM LAMP LOWER: TUNGSTEN HALOGEN LAMP EXTERNAL CONTROL TERMINALS (D-SUB CONNECTOR 9-PIN) D-sub CONNECTOR PINOUT COOLING FAN HIGH POWER UV-VIS FIBER LIGHT SOURCE 157 1 6 2 7 3 8 4 9 5 LIGHT GUIDE CONNECTOR (SMA905D) 178 FRONT VIEW 250 SHUTTER SWITCH SIDE VIEW MAIN POWER SWITCH REAR VIEW PIN No. Signal Name 1 High brightness deuterium lamp ON/OFF 2 Tungsten halogen lamp ON/OFF 3 Shutter open/close High brightness deuterium lamp status signal 4 Tungsten halogen lamp status signal 5 Main power ON/OFF status signal 6 No connection 7 No connection 8 GND 9 TLSOA0092EB This product complies with safety standard EN61010-1, EMC standard EN61326-01. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2011 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSZ1010E01 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] JUL. 2011 IP