HAMAMATSU L10290

HIGH POWER UV-VIS
NEW FIBER LIGHT SOURCE
L10290
OVERVIEW
The L10290 is a newly developed UV-visible fiber
light source that outputs 200 nm to 1100 nm light
through a light guide (sold separately).
Using a "high brightness lamp", the L10290 provides
twice radiant intensity that of conventional models.
Besides a compact size and light weight that make it
simple to carry, the L10290 is specifically designed
for easy use. These features make the L10290 ideal
for all types of portable devices.
∗ Light guide is sold separately.
FEATURES
SPECTRAL DISTRIBUTION
(TYPICAL DATA)
●High Output: Twice Intensity
TLSOB0099EB
10
L10290
WHEN TUNGSTEN-HALOGEN
LAMP WITH MAX. VOLTAGE
L10290
WHEN TUNGSTEN-HALOGEN
LAMP WITH MIN. VOLTAGE
CONVENTIONAL MODEL
(Compared to Conventional Model)
Twice intensity
RELATIVE INTENSITY
●High Stability: Fluctuation 0.004 %p-p Typ.
(Equivalent to 2 × 10-5 A.U.)
●Long Life Lamp: 2000 Hours
●External Control
●Shutter Function
●Filter Holder (Sold Separately)
(compared to conventional model)
1
LIGHT GUIDE
A7969-08AS
CORE DIA.= 0.8 mm
0.1
200
300
400
500
600
700
800
900
1000
1100
WAVELENGTH (nm)
■HAMAMATSU
ABSORBANCE (10-5 A.U.)
●Spectrophotometry
●Environmental Measurement
●Absorption Spectrum Measurement
●Micro Titer Plate Reader
●Pharmaceutical Testing
●Film Thickness Measurement
●Semiconductor Inspection
●Optical Component Inspection
LIGHT OUTPUT STABILITY (at 230 nm)
20
15
0.012 %
10
5
0
-5
-10
-15
-20
■Other manufacturer
ABSORBANCE (10-5 A.U.)
APPLICATIONS
TIME (60 s/div.)
20
15
0.012 %
10
5
0
-5
-10
-15
-20
TIME (60 s/div.)
TLSOB0059EB
SPECIFICATIONS
LIGHT GUIDE
Type No.
A7969-06AS 6
A7969-08AS 6
Specifications
200 nm to 1100 nm 1
High Brightness Deuterium Lamp
Built-in Lamp
9 W Tungsten Halogen Lamp 2
Output Fluctuation (Typ.) 0.004 % p-p (Equivalent to 2 × 10-5 A.U.)
Stability Drift (Max.)
±0.3 %/h
100 V to 240 V (100 V/200 V Auto Switching)
Input Voltage (AC)
Single Phase 50 Hz/60 Hz
Power Consumption (Max.)
140 VA
Weight
Approx. 4 kg
Light Guide Connector
SMA905D
Shutter
Included
Lamp ON/OFF 3
Shutter open/close
External Control
Status Signal for Lamp ON/OFF
and Main Power ON/OFF
Main Power ON/OFF
Main Unit Switch
Lamp ON/OFF 3
Shutter open/close
Parameter
Spectral Distribution
(SOLD SEPARATELY)
Core Diameter
0.6 mm
0.8 mm
Length
1.0 m
NOTE: 5Other shapes and combinations are available upon request.
6AS type is a UV resistant light guide.
UV RESISTANT CHARACTERISTICS (at 215 nm)
120
TLSOB0094EC
TRANSMITTANCE (%)
100
A7969-06AS, A7969-08AS
80
60
40
STANDARD TYPE
20
0
NOTE: 1The deuterium lamp (200 nm to 400 nm) and tungsten halogen
lamp (400 nm to 1100 nm) can each radiate light separately.
2Tungsten halogen lamp intensity is adjustable within a range of ±20 %.
3The deuterium lamp and tungsten halogen lamp can each be
turned on or off separately.
0
50
100
150
200
250
300
350
400
450
OPERATION TIME (h)
FILTER HOLDER (SOLD SEPARATELY)
REPLACEMENT LAMP
Lamp
Lamp Life 4
High Brightness Deuterium Lamp
2000 h
9 W Tungsten Halogen Lamp
2000 h
Type No.
L10295
L10296
5
NOTE: 4Guaranteed life. Defined as the time when the radiant intensity
falls to 50 % of its initial value.
Type No.
A10394
Applicable Filter
3 mm thick, 1 inch dia. or 1 × 1 inch
Filters should be prepared by the user.
When attaching a filter holder, remove the cover and insert the filter holder into the lamp house.
DIMENSIONAL OUTLINES (Unit: mm)
LIGHT GUIDE CONNECTOR
(SMA905D)
TRIMMER VOLUME
FOR TUNGSTEN HALOGEN LAMP
MAIN POWER INDICATOR
LAMP INDICATOR
UPPER: DEUTERIUM LAMP
LOWER: TUNGSTEN HALOGEN LAMP
SHUTTER INDICATOR
TOP VIEW
LAMP SWITCH
UPPER: DEUTERIUM LAMP
LOWER: TUNGSTEN HALOGEN LAMP
EXTERNAL CONTROL TERMINALS
(D-SUB CONNECTOR 9-PIN)
D-sub CONNECTOR PINOUT
COOLING FAN
HIGH POWER UV-VIS
FIBER LIGHT SOURCE
157
1
6
2
7
3
8
4
9
5
LIGHT GUIDE
CONNECTOR
(SMA905D)
178
FRONT VIEW
250
SHUTTER SWITCH SIDE VIEW
MAIN POWER
SWITCH
REAR VIEW
PIN No.
Signal Name
High brightness deuterium lamp ON/OFF
1
Tungsten halogen lamp ON/OFF
2
Shutter open/close
3
4
High brightness deuterium lamp status signal
5
Tungsten halogen lamp status signal
6
Main power ON/OFF status signal
7
No connection
8
No connection
9
GND
TLSOA0092EB
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
WEB SITE www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TLSO1059E02
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
OCT. 2006 IP