Photoelectric sensors OADM 20 (Laser, connector 8 pins, < 300 mm) Distance sensors sample drawing 50 20,6 38 1,5 5 4 4,3 1,5 65 * 16 57 LED Teach-in 14 M12 x 1 * emitter axis general data sample picture adjustment Teach-in: button / external power on indication LED green soiled lens indicator LED red light source pulsed red laser diode wave length 650 nm laser class 2 measuring distance Sd = 30 ... 70 mm Teach-in range min. > 2 mm resolution 0,004 ... 0,02 mm linearity error ± 0,012 ... ± 0,06 mm temperature drift < 0,015 % Sde/K measuring distance Sd = 30 ... 130 mm Teach-in range min. > 3 mm resolution 0,005 ... 0,06 mm linearity error ± 0,015 ... ± 0,2 mm temperature drift < 0,03 % Sde/K measuring distance Sd = 50 ... 300 mm Teach-in range min. > 5 mm resolution 0,01 ... 0,33 mm linearity error ± 0,03 ... ± 1 mm temperature drift < 0,03 % Sde/K laser warning LASER RADIATION DO NOT STARE INTO BEAM Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 electrical data response time / release time < 0,9 ms voltage supply range +Vs 12 ... 28 VDC current consumption max. (no load) 100 mA output circuit analog output signal 4 ... 20 mA / 0 ... 10 VDC load resistance (analog I) < (+Vs - 6 V) / 0,02 A load resistance (analog U) > 100 kOhm output current < 100 mA alarm output PNP short circuit protection yes reverse polarity protection yes, Vs to GND 1 www.baumer.com 19/6/2015 Photoelectric sensors OADM 20 (Laser, connector 8 pins, < 300 mm) Distance sensors mechanical data width / diameter 20,6 mm height / length 65 mm depth 50 mm type rectangular housing material die-cast zinc front (optics) glass connection types connector M12 8 pin, rotatable ambient conditions operating temperature 0 ... +50 °C protection class IP 67 order reference measuring distance Sd beam type beam width beam height beam diameter ambient light immunity OADM 20I6441/S14F 30 ... 70 mm point - - 1 ... 0,2 mm < 50 kLux OADM 20I6460/S14F 30 ... 130 mm point - - 2 ... 1 mm < 40 kLux OADM 20I6472/S14F 50 ... 300 mm point - - 2 mm < 8 kLux OADM 20I6541/S14F 30 ... 70 mm line 1 ... 0,2 mm 2 mm - < 50 kLux OADM 20I6560/S14F 30 ... 130 mm line 2 ... 1 mm 3 ... 5 mm - < 40 kLux OADM 20I6572/S14F 50 ... 300 mm line 2,5 mm 4 ... 12 mm - < 8 kLux 2 www.baumer.com 19/6/2015