EN

Photoelectric sensors
OPDM 12P5101
Retro-reflective sensors
dimension drawing
* 6,8
2,9
LED
35
3,2
25
2
3,2
9,2
20
2,9
35
12,4
* emitter and receiver axis
general data
photo
type
retro-reflective laser sensor
version
single lens optics
light source
pulsed red laser diode
actual range Sb
7 m
nominal range Sn
8 m
repeat accuracy
< 0,1 mm at laser focus
polarization filter
yes
alignment / soiled lens indicator
flashing light indicator
light indicator
LED yellow
power on indication
LED green
sensitivity adjustment
no
laser class
2
distance to focus
400 mm
wave length
650 nm
connection diagram
electrical data
response time / release time
< 0,1 ms
voltage supply range +Vs
10 ... 30 VDC
current consumption max. (no load)
50 mA
current consumption typ.
40 mA
voltage drop Vd
< 1,8 VDC
output function
light / dark operate
output circuit
PNP
output current
< 100 mA
short circuit protection
yes
reverse polarity protection
yes
PNP
BU (3)
+VS
dark operate
light operate
Z
Z
0V
laser warning
LASER RADIATION
DO NOT STARE INTO BEAM
Wavelength: 620...680nm
Max. av. Output: < 1mW
IEC 60825-1, Ed. 2, 2007
CLASS 2 LASER PRODUCT
mechanical data
width / diameter
12,4 mm
height / length
35 mm
depth
35 mm
type
rectangular
housing material
die-cast zinc
front (optics)
glass
connection types
cable 4 pin, 2 m
OPDM 12P5101
BN (1)
WH (2)
BK (4)
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to laser notice No. 50, dated June 24, 2007
www.baumer.com
24/4/2015
Photoelectric sensors
OPDM 12P5101
Retro-reflective sensors
ambient conditions
operating temperature
-10 ... +50 °C
protection class
IP 67
OPDM 12P5101
www.baumer.com
24/4/2015