NOMCA www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Precision Automotive, AEC-Q200 Qualified, Networks FEATURES • Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 variation AB and AC • Rugged molded case construction • Excellent long term ratio stability (R ± 0.015 %) • Low TCR tracking ± 5 ppm/°C • AEC-Q200 ESD rated 1 kV (< 10 k) The NOMCA series features a standard 14 pin or 16 pin narrow body (0.150") small outline SMT package. The network is constructed with tantalum nitride resistor film on high purity alumina substrate for improved ESD and moisture protection. Custom schematics are available consult factory. • AEC-Q200 ESD rated 2 kV (>10 k) • Compliant to RoHS Directive 2011/65/EU • Halogen-free according to IEC 61249-2-21 definition Note * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TCR TOL. TRACKING 25 5 ABSOLUTE RATIO 0.10 0.05 SCHEMATICS 1403 1603 The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC 1 k 2 k 5 k 10 k 20 k 50 k Note • Consult factory for additional values Revision: 24-Feb-12 Document Number: 60117 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NOMCA www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Tantalum nitride (Ta2N) - Pin/Lead Number 14, 16 - Resistance Range 1 k to 50 k each resistor - TCR: Absolute ± 25 ppm/°C (standard) - 55 °C to + 125 °C TCR: Tracking ± 5 ppm/°C (typical) - 55 °C to + 125 °C ± 0.10 % to ± 1 % + 25 °C ± 0.05 % to ± 0.1 % + 25 °C Power Rating: Resistor 100 mW ((typical) (03) schematic) Maximum at + 70 °C Power Rating: Package 400 mW/500 mW Maximum at + 70 °C Stability: Absolute R ± 0.05 % 1000 h at + 125 °C Stability: Ratio R ± 0.015 % 1000 h at + 125 °C < 0.1 ppm/V - Material Tolerance: Absolute Tolerance: Ratio Voltage Coefficient Working Voltage 100 V max. not to exceed - P x R Operating Temperature Range - 55 °C to + 125 °C - Storage Temperature Range - 55 °C to + 150 °C - - 30 dB - 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C Noise Thermal EMF DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION H E Index Area PIN 1 Locator h x 45° O C e A B L A1 14 16 INCHES MILLIMETERS INCHES MILLIMETERS H 0.235 5.969 0.235 5.969 E 0.154 3.911 0.154 3.910 O 0.340 8.363 0.390 9.906 A 0.063 1.600 0.063 1.600 e 0.050 1.270 0.050 1.270 B 0.015 0.381 0.015 0.381 C 0.008 0.203 0.008 0.203 L 0.025 0.635 0.025 0.635 A1 0.006 0.152 0.006 0.152 h 0.015 0.381 0.015 0.381 MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Revision: 24-Feb-12 Tantalum nitride (Ta2N) Ceramic Molded epoxy Copper alloy 100 % matte tin plate or Ni/Pd/Au solder free option Document Number: 60117 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NOMCA www.vishay.com Vishay Dale Thin Film ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to whichreference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST CONDITONS LIMITS PER AQEC-Q200 TYPICAL VISHAY PERFORMANCE < 10K TYPICAL VISHAY PERFORMANCE > 10K Resistance Temperature Characteristic - 55 °C to + 125 °C ± 25 ppm/°C 15 ppm/°C 15 ppm/°C Max. Ambient Temperature at Rated Wattage + 70 °C + 70 °C + 70 °C Max. Ambient Temperature at Power Derating + 150 °C + 150 °C + 150 °C R MIL-STD-202, 108, 1000 h at 125 °C ± 0.20 % 0.005 % 0.012 % Temperature Cycling R JESD22, A104, 1000 cycles, - 55 °C to + 125 °C ± 0.25 % 0.004 % 0.004 % Moisture Resistance R MIL-STD-202 method 106 ± 0.20 % 0.007 % 0.007 % R MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.25 % 0.021 % 0.033 % High Temperature Exposure Biased Humidity Life R MIL-STD-202, 108, 1000 h at 125 °C ± 0.10 % 0.012 % 0.029 % Mechanical Shock R MIL-STD-202 method 213, condition C ± 0.25 % 0.001 % 0.001 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.25 % 0.001 % 0.001 % Resistance to Soldering Heat R MIL-STD-202, 204, condition B ± 0.10 % - 0.002 % 0.001 % R AEC-Q200-002 at 1 kV, human body ± 0.50 % 0.065 % AEC-Q200-002 at 2 kV, human body ± 0.50 % J-STD-002 method B and B1 95 % Electrostatic Discharg Solderability Terminal Strenght R 0.170 % Acceptable Acceptable AEC-Q200-006 at 1 kg for 60 s Acceptable Acceptable AEC-Q200-001 Para 4.0 Acceptable Acceptable Flame Retardance DERATING CURVE Precent of Rated Power 100 100 % = 400 mW (14p) 500 mW (16p) 80 60 40 20 0 0 70 125 150 Ambient Temperature °C Revision: 24-Feb-12 Document Number: 60117 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NOMCA www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMCA14031002BUF N O GLOBAL MODEL (4 or 5 digits) NOMCA (Lead (Pb)-free) (e3) M C A 1 4 0 3 PINS SCHEMATIC RESISTANCE 14 16 03 = 7 or 8 isolated equal value resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1002 = 10K 1 0 0 TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F=1% 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 2 A T 1 PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 24-Feb-12 Document Number: 60117 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000