MPMA (Divider) www.vishay.com Vishay Dale Thin Film Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor, Surface Mount Network, AEC-Q200 Qualified FEATURES Vishay Thin Film MPMA Series dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as ± 0.05 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. MPMA is AEC-Q200 qualified and ideal for high precision automotive applications. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC 3 R1 1 R2 2 • AEC-Q200 qualified • Resistance range 250 Ω to 50 kΩ • Excellent long term ratio stability ± 0.03 % over 1000 h, 125 °C • Ratio tolerances to ± 0.05 % • Tracking as low as ± 2 ppm/°C • Very low noise and voltage coefficient (< -30 dB, 0.1 ppm/V) • Standard JEDEC TO-236 package variation AB • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD DIVIDER RATIO (R2/R1) RATIO 50:1 25:1 20:1 10:1 9:1 6:1 5:1 5:1 4:1 4:1 2:1 2:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 R2 (Ω) 50K 25K 20K 10K 9K 6K 10K 5K 8K 4K 10K 2K 50K 25K 10K 5K 2.5K 1K 500 250 R1 (Ω) 1K 1K 1K 1K 1K 1K 2K 1K 2K 1K 5K 1K 50K 25K 10K 5K 2.5K 1K 500 250 TCR TRACKING 10 ppm/°C 5 ppm/°C 3 ppm/°C 2 ppm/°C STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 03-Nov-15 SPECIFICATIONS Ta2N 3 250 Ω to 50 kΩ per resistor ± 25 ppm/°C Down to ± 2 ppm/°C ± 0.1 % to ± 1.0 % ± 0.05 % to 0.5 % 100 mW 200 mW < 1 kΩ: ± 0.35 %; > 1 kΩ: ± 0.04 % < 1 kΩ: ± 0.35 %; > 1 kΩ: ± 0.03 % 0.1 ppm/V 100 V max. not to exceed P x R -55 °C to +155 °C -55 °C to +155 °C < - 30 dB 0.2 μV/°C ΔR/R ± 0.01 % ΔR/R ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 1000 h at +125 °C 1000 h at +125 °C 1 year at +25 °C 1 year at +25 °C Document Number: 60113 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MPMA (Divider) www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters INCHES DIMENSION 3 W B T H L S A1 J K 1 Pin # 2 Ø MECHANICAL SPECIFICATIONS Tantalum nitride Substrate Material Ceramic Terminals Lead (Pb)-free Option MIN. MAX. A 0.031 0.040 0.79 1.02 0.001 0.004 0.02 0.10 B 0.105 0.120 2.67 3.05 S 0.071 0.079 1.80 2.00 W 0.015 0.021 0.38 0.54 L 0.083 0.098 2.10 2.50 H 0.047 0.055 1.20 1.40 T 0.005 0.010 0.13 0.25 J 0.0035 0.0059 0.089 0.15 K 0.017 0.022 0.44 0.55 Ø 0 8° 0 8° DERATING CURVE Resistive Element Body MAX. A1 Molded epoxy Copper alloy Solder free leads, Ni/Pd/Au plated 100 Percent of Rated Power A MILLIMETERS MIN. 100 % = 0.2 W 80 60 40 20 0 0 70 125 155 Ambient Temperature °C ENVIRONMENTAL TESTS ENVIRONMENTAL TEST High Temperature Exposure Temperature Cycling Moisture Resistance Biased Humidity Life Mechanical Shock Vibration Resistance to Soldering Heat CONDITIONS SUGGESTED PRODUCT LIMITS ABS/RATIO MAX. VALUES ABS/RATIO < 1 kΩ: MIL-STD-202, 108, 1000 h at 125 °C ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 % > 1 kΩ: MIL-STD-202, 108, 1000 h at 125 °C ± 0.25 %/± 0.1 % ± 0.02 %/± 0.008 % JESD22, JA-104, 1000 cycles at -55 °C to +125 °C ± 0.25 %/± 0.1 % ± 0.1%/± 0.027 % MIL-STD-202, 106 ± 0.25 %/± 0.1 % ± 0.03%/± 0.012 % MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 1.0 %/± 0.5 % ± 0.4 %/± 0.34 % < 1 kΩ: MIL-STD-202, 108 at 125 °C, 1000 h ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 % > 1 kΩ: MIL-STD-202, 108 at 125 °C, 1000 h ± 0.5 %/± 0.1 % ± 0.04 %/± 0.03 % MIL-STD-202, 213, condition C ± 0.25 %/± 0.1 % ± 0.03 %/± 0.018 % MIL-STD-204, 10 Hz to 2 kHz ± 0.25 %/± 0.1 % ± 0.02 %/± 0.047 % MIL-STD-202, 210, condition B ± 0.25 %/± 0.1 % ± 0.13 %/± 0.24 % < 1 kΩ: AEC-Q200-002 at 500 V human body ± 0.5 % ± 0.50 % > 1 kΩ: AEC-Q200-002 at 1000 V human body ± 0.5 % ± 0.25 % J-STD-002 method B and B1 Visual Visual Terminal Strength AEC-Q200-006 at 1 kg for 60 s ± 0.25 %/± 0.1 % ± 0.02 %/± 0.018 % Flame Retardance AEC-Q200-001 para 4.0 Visual Visual Electrostatic Discharge Solderability Revision: 03-Nov-15 Document Number: 60113 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MPMA (Divider) www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPMA1003AWS M P M A M P M A 1 1 0 0 3 0 0 1 5 GLOBAL MODEL (3 or 4 digits) RESISTANCE (4 or 8 digits) MPMA Ni/Pd/Au = e4 termination First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. When dual values are required list both values. Example: (List R1 first in part number with dual values) 1002 = 10K (5K/5K) 1003 = 100K (50K/50K) 10011002 = 1K/10K divider 0 TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0 1 A T 1 A T 1 PACKAGING TAPE AND REEL T1 = 1000 min., 1000 mult (1) T5 = 500 min., 500 mult TF = Full reel 4000 TP = 100 min., 1 mult (package unit single lot date code) TS = 100 min., 1 mult Note (1) Preferred packaging code Revision: 03-Nov-15 Document Number: 60113 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000