Photoelectric sensors FPE 200C4Y00 Through beam fiber optics 30 L 2,8 dimension drawing ø 2,2 4 3,8 general data photo particular characteristics parallel beam type through beam sensor actual range Sb 4500 mm response time / release time 0,05 ... 5 ms type of head (fiber optic cable) cylindrical smooth (radial) width / diameter (head) 4 mm height / length (head) 30 mm material (head) stainless steel bending radius 30 mm cable jacket diameter 2,2 mm material cable jacket PE material (fiber optic cable) plastic length (fiber optic cable) 2000 mm operating temperature -30 ... +70 °C exit angle ± 2° Sensing distance/response time: For the definitive sensing distance/response time please see table below “fitting fiber optic sensors”. The small beam angle makes a precise, virtually parallel light beam. fitting fiber optic sensors actual range Sb (0,05 ms) actual range Sb (0,25 ms) actual range Sb (1 ms) actual range Sb (5 ms) FVDK 67 (standard version) 750 mm (HS) - 3000 mm (nL) 4500 mm (HP) FVDK 67 (2 adjustable outputs) 750 mm (HS) - 3000 mm (nL) 4500 mm (HP) FVDK 67 (master/slave) 750 mm (HS) - 3000 mm (nL) 4500 mm (HP) FVDK 66 (standard version) - 920 mm (FT) 1500 mm (nL) - FVDK 66 (master/slave) - 920 mm (FT) 1500 mm (nL) - FVDK 22 - - 1000 mm (nL) - FVDK 12 - - 1000 mm (nL) - FVDK 12 (fast version) 945 mm (HS) - - - FVDK 10 - - 400 mm (nL) - FWDK 84 (analog output) - - 200 mm (nL) - operating modes HS High Speed FT fast nL Standard HP High Sensitivity www.baumer.com 11/6/2015