SPECIFICATION NOTICE LT1302/LT1302-5 February 1998 The specifications have been modified on the LT ®1302/LT1302-5 data sheet as indicated in bold. All other specifications remain unchanged. For complete specifications, typical performance curves and applications information, please see the LT1302/LT1302-5 data sheet. , LTC and LT are registered trademarks of Linear Technology Corporation. ELECTRICAL CHARACTERISTICS PARAMETER Switch Current Limit Error Amplifier Voltage Gain TA = 25°C, VIN = 2.5V unless otherwise noted. CONDITIONS VC = 0.1V (Burst ModeTM Operation) VC = 1.25V (Full Power) (Note 3) 0.9V ≤ VC ≤ 1.2V, ∆VC/∆VFB ● MIN 0.6 2.0 40 TYP 1 2.8 60 MAX 3.9 UNITS A A V/V The ● denotes specifications which apply over the full operating temperature range. Burst Mode is a trademark of Linear Technology Corporation. Note 3: Minimum switch current 100% tested. Maximum switch current guaranteed by design. For further information regarding this specification notice contact: Linear Technology Corporation 1630 McCarthy Blvd. Milpitas, California 95035-7417 Attn: Product Marketing Manager Phone: (408) 432-1900 sn1302a ©1997 LT/HP 0298 REV A • PRINTED IN USA