Data Sheet - LM362A High Flux

Rev: 003
Product Family Data Sheet
LM362A
- 3623 LED PKG
Introduction
Features
 Beam Angle: 120˚
 Precondition : JEDEC Level 2a
 Dimension : 3.6 x 2.3 x 0.6 mm
 ESD withstand Voltage : up to ±5KV [HBM]
 Reliability Test : Refer to page 25
SAMSUNG ELECTRONICS
95, Samsung2-Ro, Giheung-Gu,
Yongin-City, Gyeonggi-Do 446-711, KOREA
Copyright © 2009-2011 SAMSUNG ELECTRONICS Co.,Ltd. All rights reserved. The information in this document is subject to
change without notice. SAMSUNG,
http://www.samsungled.com
is a registered trademark of SAMSUNG ELECTRONICS.
1 / 54
Contents
1. Product Code Information
-----------------------
3
2. Luminous Flux Characteristics
-----------------------
9
3. Characteristics
----------------------- 13
4. Typical Characteristics Graph
----------------------- 15
5. Outline Drawing & Dimension
----------------------- 23
6. Reliability Test Items & Conditions
----------------------- 24
7. Solder Conditions
----------------------- 25
8. Tape & Reel
----------------------- 26
9. Label Structure
----------------------- 27
10. Packing Structure
----------------------- 28
11. Precaution For Use
----------------------- 30
12. Hazard Substance Analysis Report
----------------------- 32
13. Revision History
----------------------- 54
http://www.samsungled.com
2 / 54
1. Product Code Information
1) Luminous Flux Bins (Ts = 25℃)
Nominal
Product Code
Flux Rank
2700K
SPMWHT325AD5YBW0SC
SC
3000K
SPMWHT325AD5YBV0SC
3500K
SPMWHT325AD5YBU0SC
CCT
4000K
5000K
5700K
6500K
SPMWHT325AD5YBT0SC
SPMWHT325AD5Y6T0SC
SPMWHT325AD5YBR0SC
SPMWHT325AD5Y6R0SC
SPMWHT325AD5YBQ0SC
SPMWHT325AD5YBP0SC
SC
SC
SC
SC
SC
SC
Sorting Condition lm@100mA
Flux Bin
Flux Range (lm)
S3
68 ~ 78
S4
78 ~ 88
S3
70 ~ 80
S4
80 ~ 90
S3
73 ~ 83
S4
83 ~ 93
S3
75 ~ 85
S4
85 ~ 95
S3
76 ~ 86
S4
86 ~ 96
S3
75 ~ 85
S4
85 ~ 95
S3
75 ~ 85
S4
85 ~ 95
Notes: SAMSUNG ELECTRONICS maintains a tolerance of ±5% on Luminous Flux measurements
http://www.samsungled.com
3 / 54
2) Color Bins (Ts = 25℃)
1) Color Binning
Nominal
CCT
Product Code
Color Rank
SPMWHT325AD5YBW0SC
W0 (Whole Bin)
SPMWHT325AD5YBWMSC
WM (Quater Bin)
SPMWHT325AD5YBV0SC
V0 (Whole Bin)
SPMWHT325AD5YBVMSC
VM (Quater Bin)
SPMWHT325AD5YBU0SC
U0 (Whole Bin)
SPMWHT325AD5YBUMSC
UM (Quater Bin)
2700K
3000K
3500K
SPMWHT325AD5YBT0SC
4000K
SPMWHT325AD5Y6T0SC
SPMWHT325AD5YBTMSC
W1,W2,W3,W4,W5,W6,W7,W8,
W9,WA,WB,WC,WD,WE,WF,WG
W6,W7,WA,WB
V1,V2,V3,V4,V5,V6,V7,V8,
V9,VA,VB,VC,VD,VE,VF,VG
V6,V7,VA,VB
U1,U2,U3,U4,U5,U6,U7,U8,
U9,UA,UB,UC,UD,UE,UF,UG
U6,U7,UA,UB
T1,T2,T3,T4,T5,T6,T7,T8,
T9,TA,TB,TC,TD,TE,TF,TG
TM (Quater Bin)
T6,T7,TA,TB
R0 (Whole Bin)
R1,R2,R3,R4,R5,R6,R7,R8,
SPMWHT325AD5YBRMSC
RM (Quater Bin)
R1,R2,R3,R4
SPMWHT325AD5YBQ0SC
Q0 (Whole Bin)
Q1,Q2,Q3,Q4,Q5,Q6,Q7,Q8,
SPMWHT325AD5YBQMSC
QM (Quater Bin)
Q1,Q2,Q3,Q4
SPMWHT325AD5YBP0SC
P0 (Whole Bin)
P1,P2,P3,P4,P5,P6,P7,P8,
SPMWHT325AD5YBPMSC
PM (Quater Bin)
P1,P2,P3,P4
SPMWHT325AD5YBR0SC
5000K
T0 (Whole Bin)
Chromaticity Bins
SPMWHT325AD5Y6R0SC
5700K
6500K
http://www.samsungled.com
4 / 54
2) Chromaticity Region & Coordinates
http://www.samsungled.com
5 / 54
2) Chromaticity Region & Coordinates (Continued)
Region CIE X CIE Y Region CIE X CIE Y
Region CIE X CIE Y Region CIE X CIE Y
W rank (2700K)
V rank (3000K)
0.4373 0.3893
W1
W2
W3
W4
W5
W6
W7
W8
0.4418 0.3981
0.4475 0.3994
0.4465 0.4071
W9
0.4513 0.4164
0.4573 0.4178
0.4147 0.3814
V1
0.4183 0.3898
0.4242 0.3919
0.4221 0.3984
V9
0.4259 0.4073
0.4322 0.4096
0.4428 0.3906
0.4523 0.4085
0.4203 0.3833
0.4281 0.4006
0.4428 0.3906
0.4523 0.4085
0.4203 0.3833
0.4281 0.4006
0.4475 0.3994
0.4532 0.4008
WA
0.4573 0.4178
0.4634 0.4193
V2
0.4242 0.3919
0.4300 0.3939
VA
0.4322 0.4096
0.4385 0.4119
0.4483 0.3919
0.4582 0.4099
0.4259 0.3853
0.4342 0.4028
0.4483 0.3919
0.4582 0.4099
0.4259 0.3853
0.4342 0.4028
0.4532 0.4008
0.4589 0.4021
WB
0.4634 0.4193
0.4695 0.4207
V3
0.4300 0.3939
0.4359 0.3960
VB
0.4385 0.4119
0.4449 0.4141
0.4538 0.3931
0.4641 0.4112
0.4316 0.3873
0.4403 0.4049
0.4538 0.3931
0.4641 0.4112
0.4316 0.3873
0.4403 0.4049
0.4589 0.4021
0.4646 0.4034
WC
0.4695 0.4207
0.4756 0.4221
V4
0.4359 0.3960
0.4418 0.3981
VC
0.4449 0.4141
0.4513 0.4164
0.4593 0.3944
0.4700 0.4126
0.4373 0.3893
0.4465 0.4071
0.4418 0.3981
0.4513 0.4164
0.4183 0.3898
0.4259 0.4073
0.4465 0.4071
0.4523 0.4085
WD
0.4562 0.4260
0.4624 0.4274
V5
0.4221 0.3984
0.4281 0.4006
VD
0.4299 0.4165
0.4364 0.4188
0.4475 0.3994
0.4573 0.4178
0.4242 0.3919
0.4322 0.4096
0.4475 0.3994
0.4573 0.4178
0.4242 0.3919
0.4322 0.4096
0.4523 0.4085
0.4582 0.4099
WE
0.4624 0.4274
0.4687 0.4289
V6
0.4281 0.4006
0.4342 0.4028
VE
0.4364 0.4188
0.4430 0.4212
0.4532 0.4008
0.4634 0.4193
0.4300 0.3939
0.4385 0.4119
0.4532 0.4008
0.4634 0.4193
0.4300 0.3939
0.4385 0.4119
0.4582 0.4099
0.4641 0.4112
WF
0.4687 0.4289
0.4750 0.4304
V7
0.4342 0.4028
0.4403 0.4049
VF
0.4430 0.4212
0.4496 0.4236
0.4589 0.4021
0.4695 0.4207
0.4359 0.3960
0.4449 0.4141
0.4589 0.4021
0.4695 0.4207
0.4359 0.3960
0.4449 0.4141
0.4641 0.4112
0.4700 0.4126
0.4646 0.4034
http://www.samsungled.com
WG
0.4750 0.4304
0.4813 0.4319
0.4756 0.4221
V8
0.4403 0.4049
0.4465 0.4071
0.4418 0.3981
VG
0.4496 0.4236
0.4562 0.4260
0.4513 0.4164
6 / 54
2) Chromaticity Region & Coordinates (Continued)
Region CIE X CIE Y Region CIE X CIE Y
Region CIE X CIE Y Region CIE X CIE Y
U rank (3500K)
T rank (4000K)
0.3889 0.3690
U1
U2
U3
U4
U5
U6
U7
U8
0.3915 0.3768
0.367 0.3578
0.3941 0.3848
U9
0.3968 0.3930
T1
0.3726 0.3612
0.3702 0.3722
T9
0.3763 0.376
0.4040 0.3966
0.3744 0.3685
0.3953 0.3720
0.4010 0.3882
0.3686 0.3649
0.3719 0.3797
0.3953 0.3720
0.4010 0.3882
0.3726 0.3612
0.3763 0.376
0.3981 0.3800
0.3981 0.3800
UA
0.4040 0.3966
T2
0.3783 0.3646
TA
0.3782 0.3837
0.3825 0.3798
0.4113 0.4001
0.3804 0.3721
0.4017 0.3751
0.4080 0.3916
0.3744 0.3685
0.3782 0.3837
0.4017 0.3751
0.4080 0.3916
0.3783 0.3646
0.3825 0.3798
0.4048 0.3832
0.4048 0.3832
UB
0.4113 0.4001
T3
0.384 0.3681
TB
0.3847 0.3877
0.3887 0.3836
0.4186 0.4037
0.3863 0.3758
0.4082 0.3782
0.4150 0.3950
0.3804 0.3721
0.3847 0.3877
0.4082 0.3782
0.4150 0.3950
0.384 0.3681
0.3887 0.3837
0.4116 0.3865
0.4116 0.3865
UC
0.4186 0.4037
T4
0.3898 0.3716
TC
0.3912 0.3917
0.395 0.3875
0.4259 0.4073
0.3924 0.3794
0.4147 0.3814
0.4221 0.3984
0.3863 0.3758
0.3912 0.3917
0.3915 0.3768
0.3968 0.3930
0.3686 0.3649
0.3719 0.3797
0.4183 0.3898
0.3941 0.3848
UD
0.3996 0.4015
T5
0.3744 0.3685
TD
0.3978 0.3958
0.3782 0.3837
0.4071 0.4052
0.3763 0.376
0.3981 0.3800
0.4040 0.3966
0.3702 0.3722
0.3736 0.3874
0.3981 0.3800
0.4040 0.3966
0.3744 0.3685
0.3782 0.3837
0.4010 0.3882
0.4010 0.3882
UE
0.4071 0.4052
T6
0.3804 0.3721
TE
0.3802 0.3916
0.3847 0.3877
0.4146 0.4089
0.3825 0.3798
0.4048 0.3832
0.4113 0.4001
0.3763 0.376
0.3802 0.3916
0.4048 0.3832
0.4113 0.4001
0.3804 0.3721
0.3847 0.3877
0.4080 0.3916
0.4080 0.3916
UF
0.4146 0.4089
T7
0.3863 0.3758
TF
0.3869 0.3958
0.3912 0.3917
0.4222 0.4127
0.3887 0.3836
0.4116 0.3865
0.4186 0.4037
0.3825 0.3798
0.3869 0.3958
0.4116 0.3865
0.4186 0.4037
0.3863 0.3758
0.3912 0.3917
0.4150 0.3950
0.4150 0.3950
0.4221 0.3984
0.4183 0.3898
http://www.samsungled.com
UG
0.4222 0.4127
T8
0.3924 0.3794
0.4299 0.4165
0.395 0.3875
0.4259 0.4073
0.3887 0.3836
TG
0.3937 0.4001
0.3978 0.3958
0.4006 0.4044
0.3937 0.4001
7 / 54
2) Chromaticity Region & Coordinates (Continued)
Region CIE X CIE Y Region CIE X CIE Y
Region CIE X CIE Y Region CIE X CIE Y
R rank (5000K)
P rank (6500K)
0.3371 0.3490
R1
R2
R3
R4
0.3451 0.3554
0.3440 0.3427
0.3366 0.3369
R5
Q2
Q3
Q4
0.3144 0.3186
0.3130 0.3290
P5
0.3161 0.3059
0.3144 0.3186
0.3361 0.3245
0.3048 0.3207
0.3068 0.3113
0.3451 0.3554
0.3440 0.3428
0.3144 0.3186
0.3161 0.3059
0.3533 0.3620
0.3515 0.3487
R6
0.3515 0.3487
0.3495 0.3339
P2
0.3221 0.3261
0.3213 0.3373
P6
0.3231 0.3120
0.3221 0.3261
0.3440 0.3427
0.3429 0.3307
0.3130 0.3290
0.3144 0.3186
0.3376 0.3616
0.3381 0.3762
0.3048 0.3207
0.3028 0.3304
0.3463 0.3687
0.3451 0.3554
R7
0.3480 0.3840
0.3463 0.3687
P3
0.3130 0.3290
0.3115 0.3391
P7
0.3115 0.3391
0.3099 0.3509
0.3371 0.3490
0.3376 0.3616
0.3028 0.3304
0.3005 0.3415
0.3463 0.3687
0.3480 0.3840
0.3130 0.3290
0.3115 0.3391
0.3551 0.3760
0.3533 0.3620
R8
0.3571 0.3907
0.3551 0.3760
0.3463 0.3687
P4
0.3213 0.3373
0.3205 0.3481
0.3115 0.3391
P8
0.3205 0.3481
0.3196 0.3602
0.3099 0.3509
Q rank (5700K)
0.3215 0.3350
Q1
0.3429 0.3307
P1
0.3093 0.2993
0.3366 0.3369
0.3451 0.3554
Notes:
0.3440 0.3428
0.3068 0.3113
0.3290 0.3417
0.3290 0.3300
0.3222 0.3243
Q5
0.3290 0.3300
0.3290 0.3180
0.3222 0.3243
0.3231 0.3120
0.3290 0.3417
0.3290 0.3300
0.3371 0.3490
0.3366 0.3369
Q6
0.3366 0.3369
0.3361 0.3245
0.3290 0.3300
0.3290 0.3180
0.3207 0.3462
0.3196 0.3602
0.3290 0.3538
0.3290 0.3417
Q7
0.3290 0.3690
0.3290 0.3538
0.3215 0.3350
0.3207 0.3462
0.3290 0.3538
0.3290 0.3690
0.3376 0.3616
0.3371 0.3490
0.3290 0.3417
Q8
0.3381 0.3762
0.3376 0.3616
0.3290 0.3538
SAMSUNG ELECTRONICS maintains ±0.005 tolerance of Cx, Cy
http://www.samsungled.com
8 / 54
2. Luminous Flux Characteristics (Ts = 25℃)
Nominal
Minimum
CCT
CRI1)
2700K
3000K
If(mA)
Vf(V)
Power(W)
Flux(lm)
lm/W
50
5.71
0.29
39
138
100
5.96
0.60
72
121
110
5.99
0.66
78
117
120
6.03
0.72
84
115
130
6.06
0.79
89
113
140
6.09
0.85
94
110
150
6.11
0.92
100
108
160
6.14
0.98
104
106
170
6.17
1.05
108
103
180
6.20
1.12
113
101
190
6.23
1.18
118
99
200
6.27
1.25
122
97
50
5.71
0.29
41
144
100
5.96
0.60
75
126
110
5.99
0.66
81
122
120
6.03
0.72
87
120
130
6.06
0.79
93
118
140
6.09
0.85
98
115
150
6.11
0.92
104
113
160
6.14
0.98
109
110
170
6.17
1.05
113
108
180
6.20
1.12
118
106
190
6.23
1.18
122
103
200
6.27
1.25
127
101
80
80
http://www.samsungled.com
9 / 54
Nominal
Minimum
CCT
CRI1)
3500K
4000K
If(mA)
Vf(V)
Power(W)
Flux(lm)
lm/W
50
5.71
0.29
42
148
100
5.96
0.60
77
129
110
5.99
0.66
83
126
120
6.03
0.72
89
123
130
6.06
0.79
95
121
140
6.09
0.85
101
118
150
6.11
0.92
106
116
160
6.14
0.98
112
113
170
6.17
1.05
116
111
180
6.20
1.12
121
108
190
6.23
1.18
126
106
200
6.27
1.25
130
104
50
5.71
0.29
44
154
100
5.96
0.60
80
134
110
5.99
0.66
86
131
120
6.03
0.72
93
128
130
6.06
0.79
99
125
140
6.09
0.85
105
123
150
6.11
0.92
111
120
160
6.14
0.98
116
118
170
6.17
1.05
121
115
180
6.20
1.12
126
113
190
6.23
1.18
131
110
200
6.27
1.25
135
108
80
80
http://www.samsungled.com
10 / 54
Nominal
Minimum
CCT
CRI1)
5000K
If(mA)
Vf(V)
Power(W)
Flux(lm)
lm/W
50
5.71
0.29
44
155
100
5.96
0.60
81
136
110
5.99
0.66
87
132
120
6.03
0.72
94
129
130
6.06
0.79
100
127
140
6.09
0.85
106
124
150
6.11
0.92
112
122
160
6.14
0.98
118
119
170
6.17
1.05
122
116
180
6.20
1.12
127
114
190
6.23
1.18
132
112
200
6.27
1.25
137
109
80
http://www.samsungled.com
11 / 54
Nominal
Minimum
CCT
CRI1)
5700K
6500K
If(mA)
Vf(V)
Power(W)
Flux(lm)
lm/W
50
5.71
0.29
44
154
100
5.96
0.60
80
134
110
5.99
0.66
86
131
120
6.03
0.72
93
128
130
6.06
0.79
99
125
140
6.09
0.85
105
123
150
6.11
0.92
111
120
160
6.14
0.98
116
118
170
6.17
1.05
121
115
180
6.20
1.12
126
113
190
6.23
1.18
131
110
200
6.27
1.25
135
108
50
5.71
0.29
43
152
100
5.96
0.60
79
133
110
5.99
0.66
85
129
120
6.03
0.72
92
126
130
6.06
0.79
98
124
140
6.09
0.85
104
121
150
6.11
0.92
109
119
160
6.14
0.98
115
116
170
6.17
1.05
119
113
180
6.20
1.12
124
111
190
6.23
1.18
129
109
200
6.27
1.25
134
106
80
80
http://www.samsungled.com
12 / 54
3. Characteristics
1) Absolute Maximum Rating
Item
Symbol
Rating
Condition
Operating temperature range
Top
-40℃ ~ +85℃
-
Storage temperature range
Tstg
-40℃ ~ +100℃
-
LED junction temperature
TJ
125℃
-
Forward Current
IF
200 mA
-
Peak Pulsed Forward Current
IFP
400 mA
Duty 1/10 pulse width 10ms
Thermal resistance
Rth, j-s
15℃/W
Junction to solder point
Assembly Process Temperature
-
260℃, < 10sec
-
ESD
-
5kV
HBM
2) Electro-optical Characteristics - Voltage and CRI
Item
Unit
Rank
Min
Typ
Max
A1
5.6
-
5.8
A2
5.8
-
6.0
A3
6.0
-
6.2
A4
6.2
-
6.4
A5
6.4
-
6.6
Y6
Forward Voltage (@100 mA, Ts = 25℃)
V
YB
Reverse Voltage (@5 mA, Ts = 25℃)
V
-
0.7
-
1.2
Color Rendering Index
Ra
5
80
-
-
Notes:
1)~2) SAMSUNG ELECTRONICS maintains a tolerance of VF:±0.1 V, Φv:±5 %, Ra :±3.0 on
measurements
http://www.samsungled.com
13 / 54
3) Electro-optical Characteristics
Item
Luminous Flux
(@100 mA, Ts = 25℃)
Unit
lm
CCT
2700K
SC
3000K
SC
3500K
SC
4000K
SC
5000K
http://www.samsungled.com
Rank
SC
5700K
SC
6500K
SC
Min
Typ
Max
S3
68
78
S4
78
S3
70
S4
80
S3
73
S4
83
-
S3
75
85
S4
85
95
S3
76
86
S4
86
96
S3
75
85
S4
85
95
S3
75
85
S4
85
95
88
80
90
83
93
14 / 54
4. Typical Characteristics Graph (@100mA)
1) Spectrum Distribution
2700K
Ts = 25℃
3000K
Ts = 25℃
http://www.samsungled.com
15 / 54
3500K
Ts = 25℃
4000K
Ts = 25℃
http://www.samsungled.com
16 / 54
5000K
http://www.samsungled.com
Ts = 25℃
17 / 54
5700K
Ts = 25℃
6500K
Ts = 25℃
http://www.samsungled.com
18 / 54
2) Forward Current Characteristics
Relative Luminous Flux vs. Forward Current
Ts = 25℃
Forward Current vs. Forward Voltage
Ts = 25℃
http://www.samsungled.com
19 / 54
3) Temperature Characteristics
(@100mA)
Relative Luminous Flux vs. Ts(solder temp.)
Forward Voltage vs. Ts(solder temp.)
http://www.samsungled.com
20 / 54
Color △x, △y vs. Ts(solder temp.) @100mA
CCT : 5000K
4) Color shift Characteristics
Color △x, △y vs. Forward Current
http://www.samsungled.com
Ts = 25℃
21 / 54
5) Derating Curve
Ta = 25℃
Rj-a = 30℃/W
Rj-a = 21℃/W
Rj-a = 12℃/W
6) Viewing Angle Characteristics
http://www.samsungled.com
(@100mA)
Ts = 25℃
22 / 54
5. Outline Drawing and Dimension
Anode
Cathode
1. Tolerance is ±0.1 mm
2. The maximum compressing force is 15N on the silicone body ⓐ
3. Do not place pressure on the encapsulation resin ⓑ
Recommended Land Pattern
Thermal pad
Ts
Notes:
1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s).
2) Ts point & measurement method
① Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts
point.
② Thermal pad must be soldered to the PCB to dissipate heat properly. Otherwise, LED can be
damaged.
3) The thermal pad is electrically connected to the cathode contact pads.
4) Precautions
① The pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be
taken to avoid the strong pressure on the LEDs. Do not put stress on the LEDs during heating.
② Re-soldering should not be done after the LEDs have been soldered. If re-soldering is
unavoidable, LED`s characteristics should be carefully checked before and after such repair.
③ Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two
PCB assembled with LED might cause catastrophic failure of the LEDs.
http://www.samsungled.com
23 / 54
6. Reliability Test Items and Conditions
1) Test Items and Results
Test Item
Test Conditions
Test
Hours/Cycles
Sample No
MSL Test
125 ℃ 24hrs drying → 60 ℃, 60 %RH 120hrs
→ 260 ℃ 10sec 3 cycles
1 cycle
11
Room Temperature
life test
25 ℃±3 ℃, DC200㎃
1,000 hrs
22
High Temperature
life test
85 ℃±3 ℃, DC200 ㎃
1,000 hrs
22
High Temperature
humidity life test
85℃±3 ℃, 85 %±2 %RH, DC200 ㎃
1,000 hrs
22
Low Temperature
life test
-40 ℃±3 ℃, DC200 ㎃
1,000 hrs
22
Power Temperature
Cycle
-40 ℃/20 min ↔ 85 ℃/20 min,
Temp. change within 100min, on/off 5 min
100 cycles
50
Thermal Shock
-45 ℃/15 min ↔ 125 ℃/15 min,
Temp. change within 5min
→ Hot plate 180 ℃
200 cycles
100
High Temperature
Storage
Ta=120 ℃±3 ℃
1000 hrs
11
Low Temperature
Storage
Ta=-40 ℃±3 ℃
1000 hrs
11
ESD(HBM)
R1:10 ㏁, R2:1.5 ㏀,
C:100 ㎊, V = ±5 kV
5 times
10
ESD(MM)
R1:10 ㏁, R2:0,
C:200 ㎊, V = ±0.5 kV
5 times
10
Vibration Test
100~2000~100 Hz, 200 m/s2,
Sweep 4 min,
X, Y, Z 3 direction, each 1 cycle
4 cycles
11
Mechanical Shock Test
1500G, 0.5 ms
5 cycles
11
2) Criteria for Judging the Damage
Item
Symbol
Limit
Test Condition
Min
Max
Forward Voltage
VF
IF = 100 ㎃
Init. Value*0.9
Init. Value*1.1
Luminous Flux
Im
IF = 100 ㎃
Init. Value*0.8
Init. Value*1.2
http://www.samsungled.com
24 / 54
7. Solder Conditions
1) Reflow Conditions ( Pb Free )
Reflow Frequency : 2 times max.
2) For Manual Soldering
Not more than 5 seconds @Max. 300℃, under soldering iron.
http://www.samsungled.com
25 / 54
8. Tape And Reel
Start
End
More than 40 ㎜
Mounted with
More than (100~200)㎜
Leading part more than
Unloaded tape
LED Package
Unloaded tape
(200~400)㎜
(1) Quantity : The quantity/reel to be 4,000 pcs.
(2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 ㎜
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the
cover tape is turned off from the carrier tape at 10° angle to be the carrier tape.
(4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a
damp proof package.
http://www.samsungled.com
26 / 54
9. Label Structure
1) Label Structure
ⓐⓑⓒⓓⓔⓕ
A1W1S3
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / I001 / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Rank Code
Rank Code
ⓐⓑ
: Forward Voltage Rank
ⓒⓓ
: Chromaticity Coordinate Rank
ⓔⓕ
: Luminous Intensity Rank
2) LOT Number
The Lot number is composed of the following characters
A1W1S3
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
①②③④⑤⑥⑦⑧⑨ / Iⓐⓑⓒ / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
①②③④⑤⑥⑦⑧⑨ / Iⓐⓑⓒ / 4,000 PCS
①
: Production Site (S:SAMSUNG LED, G:GOSIN CHINA)
②
: L (LED)
③
: Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample)
④
: Year (V:2011, W:2012, X:2013...)
⑤
: Month (1 ~ 9, A, B, C)
⑥
: Day (1 ~ 9, A, B ~ V)
⑦⑧⑨
: SAMSUNG LED Product number (1 ~ 999)
ⓐⓑⓒ
: Reel Number (1 ~ 999)
http://www.samsungled.com
27 / 54
10. Packing Structure
1) Packing Process
Reel
A1W1S3
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 4,000 pcs
LEVEL
2a
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Aluminum Vinyl Bag
A1W1S3
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Material : Paper(SW3B(B))
TYPE
7inch
SIZE(mm)
Reels/ box
ⓐ
ⓑ
ⓒ
245±5
220±5
182±5
Up to 10 Reels
245±5
220±5
86±5
Up to 5 Reels
① SIDE
A1W1S3
①
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAV94001 / 1001 / 40,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
H
CHIP LED
[Box Label]
W
L
http://www.samsungled.com
28 / 54
2) Aluminum Packing Bag
A1W1S3
SPMWHT325AD5Y▲W0SC A1W1S3 01
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
GLAW94001 / I001 / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag
http://www.samsungled.com
29 / 54
11. Precaution for use
1) For over-current-proof function, customers are recommended to apply resistors to prevent
sudden change of the current caused by slight shift of the voltage.
2) This device should not be used in any type of fluid such as water, oil, organic solvent,
etc. When washing is required, IPA is recommended to use.
3) When the LEDs illuminate, operating current should be decided after considering the
ambient maximum temperature.
4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3
months or more after being shipped from Samsung Electronics, they should be packed
by a sealed container with nitrogen gas injected.(Shelf life of sealed bags: 12 months,
temp. ~40℃, ~90%RH)
5) After storage bag is open, device subjected to soldering, solder reflow, or other high
temperature processes must be:
a. Mounted within 672 hours(28 days) at an assembly line with a condition of no
more than 30℃/60%RH,
b. Stored at <10%RH.
6) Repack unused Products with anti-moisture packing, fold to close any opening and then
store in a dry place.
7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃..
8) Devices must be baked for 1 hour at 65±5℃, if baking is required.
9) The LEDs are sensitive to the static electricity and surge.
It is recommended to use a
wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the
absolute maximum rating is applied to LEDs, it may cause damage or even destruction
to LED devices. Damaged LEDs may show some unusual characteristics such as
increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low
current.
10) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener
or organic additives used in luminaires(fixtures). Transparent LED silicone encapsulant
is permeable to those chemicals and they may lead a discoloration of encapsulant
when they exposed to light and heat. This phenomenon can cause a significant loss of
light emitted(output) from the luminaires(fixture). In order to prevent these problems, we
recommend you to know the physical properties of materials used in luminaires, They
must be selected carefully.
http://www.samsungled.com
30 / 54
11) Risk of Sulfurization(or Tarnishing)
The LED from Samsung Electronics uses a silver-plated lead frame and its surface
color may change to black(or dark colored) when it is exposed to sulfur (S), chlorine
(Cl) or other halogen compound.
Sulfurization of lead frame may cause intensity degradation, change of chromaticity
coordinates and, in extreme cases, open circuit. It requires caution.
Due to possible sulfurization of lead frame, LED should not be used and stored
together with oxidizing substances made of materials in a following list,
: Rubber, plain paper, lead solder cream and so on.
http://www.samsungled.com
31 / 54
12. Hazard Substance Analysis Report
http://www.samsungled.com
32 / 54
http://www.samsungled.com
33 / 54
http://www.samsungled.com
34 / 54
http://www.samsungled.com
35 / 54
http://www.samsungled.com
36 / 54
http://www.samsungled.com
37 / 54
http://www.samsungled.com
38 / 54
http://www.samsungled.com
39 / 54
http://www.samsungled.com
40 / 54
http://www.samsungled.com
41 / 54
http://www.samsungled.com
42 / 54
http://www.samsungled.com
43 / 54
http://www.samsungled.com
44 / 54
http://www.samsungled.com
45 / 54
http://www.samsungled.com
46 / 54
http://www.samsungled.com
47 / 54
http://www.samsungled.com
48 / 54
http://www.samsungled.com
49 / 54
http://www.samsungled.com
50 / 54
http://www.samsungled.com
51 / 54
http://www.samsungled.com
52 / 54
http://www.samsungled.com
53 / 54
Revision History
Date
No.
Revision History
2014.03.03
001
2014.03.19
2014.05.07
Writer
Drawn
Approved
New version
N.R.KIM
S.B.YUN
002
Addition of R, U model code
N.R.KIM
S.B.YUN
003
Addition of Y6 model code
N.R.KIM
S.B.YUN
http://www.samsungled.com
54 / 54