DATE OF ISSUE : June 03, 2015
Document No.
LED Module
P7V2F32MBKI-0.1
REV.NO.
PAGE
0.1
SPECIFICATION
LED Module for Modular Platform Series
Model Name
LED Platform Module without Fin
CRI min. 7 0, 3000K, Flux Rank 3 ,
Type
Type Ⅱ-M, 351B PKG
Parts No.
SL-P7V2F32MBKI
SAMSUNG
DEVELOP.
PRODUCT
PLANNING
CUSTOMER
QA(DQA)
SALES
SAMSUNG ELECTRONICS CO., LTD.
1/11
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
PAGE
0.1
2/11
REVISION HISTORY OF SPECIFICATION
REV.
NUM
REVISION
PAGE
DATE
TRACED
APPROVED
0.0
The Preliminary specification established.
1~9
2015.05.12
-
S.A. Joo
0.1
The First Specification Established
1~9
2015.06.03
-
S.A. Joo
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
PAGE
3/11
0.1
CONTENTS OF SPECIFICATION
1. APPLICATION
................................................................................................
2. FUNDAMENTAL SPECIFICATIONS OF MODULE
4
....................................
6
............................................................................
7
4. APPEARANCE AND STRUCTURE ..................................................................
8
5. PACKING SPECIFICATION
9
3. PARTS SPECIFICATIONS
6. Label Structure
............................................................................
.................................................................................................. 10
This is a product specification of SL-P7V2F32MBKI, one of SL-Puv2vwaabcc.
Please refer to relevant General and Special Application Notes for thermal, optical, electrical,
mechanical design and reliability information.
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
PAGE
0.1
4/11
1. APPLICATION
25W Platform LED Module is designed as a core component in Modular Platform Engine
Series for street light and flood light application. This document especially specifies 25W
Platform LED Module with Fin, generally recommended for luminaires with insufficient
thermal management by the fixture itself.
1-1 Modular Platform Modules.
There are three different types of heat sink designs for 25W Platform LED Module,
intended for thermal management either by engine or by fixture.
This document especially specifies 25W Platform LED Module without Fin for thermal
management by Fixtures.
(a) Module with Fin
(b) Module without Fin
[Thermal management by Module/Engine]
[Thermal management by Fixture]
1-2 Modular Platform Engine Series
Typical operating current for one module is set at 700mA, which allows lumen output
increment by 2000lm(nominal value) depending on the number of LED modules.
1-2-1 Lumen Packages with LED Driver
Power
Consumption
(Engine, Nominal)
Modules
(ea)
Driver
Output
Channels
(ea)
Operating
Current
(mA)
Lumen
Output
(lm)
25W
1
1
700
2000
50W
2
1
700
4000
75W
3
1
700
6000
100W
4
2
700
8000
150W
6
2
700
12000
※ This Module is recommended using a Isolated PSU.
1-2-2 Current Distribution across Modules
Current per module can vary depending on the Vf distribution of modules in parallel,
deviating from the nominal operating current(700mA). The Vf distribution of modules is
tightly controlled to achieve uniform driving currents.
DATE OF ISSUE : June 03, 2015
Document No.
LED Module
P7V2F32MBKI-0.1
REV.NO.
PAGE
5/11
0.1
1-2-3 Optic Solutions
Application
Street Light
Flood Light
Light
Distribution
Solutions
Material
IESNA Type I
Medium(1)
PC
IESNA Type II
Short(1), Medium(1), Medium(2)
PC
IESNA Type III
Medium(1)
PC
IESNA Type IV
Medium(1)
PC
IESNA Type V
Short(1)
PC
Medium
Batwing (BA85)
PC
※ BA : Beam Angle, PC : Polycarbonate
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
PAGE
0.1
6/11
2. FUNDAMENTAL SPECIFICATIONS OF MODULE
No.
ARTICLE
SPECIFICATIONS
Photometric Specification of Platform LED Module @700mA(stabilized at Tc~65℃)
CCT
Article
3000K
Symbol MIN
TYP
MAX
Unit
lm
Goniometer
K
Integrating Sphere
Luminous Flux
LF
1950
2100
Color Temperature
CCT
2900
3000
3200
Color Consistency
Step
-
3
-
Color Rendering
Index
CRI
70
-
-
Equipments
MacAdam Integrating Sphere
Step
Ra
Integrating Sphere
※ Typical values are not necessarily the same as the nominal values.
※ Measurement tolerance of luminous flux becomes ± 7% in the value,
and the measurement tolerance of the color coordinates is ± 0.005.
2-1
Light Distribution Profile : Type II Medium(1) with Optimized Illuminance Uniformity
※ The isolux diagram is drawn at the luminaire height of 5m.
※ IES files(in IESNA or CIE format) are available with Optical Application Notes.
2-2
Dimension
2-3
Weight
ㆍLED Module without Fin : 150(L)×50(W)×11.6(H) ㎜
ㆍLED Lighting Module : {0.17kg ± 0.02kg} * 24ea
ㆍTotal Weight (including packing box) : 5.4kg ± 0.6kg/1box
ㆍCase Temperature Tc : +10℃ ~ +90℃
2-4
Operating
Temperature
※ Recommended Tc points as a function of number of modules are
described in Thermal Application Notes.
※ Tc should be measured with recommended Heatshik.
2-5
Storage
Temperature
ㆍ-30℃ ~ +70℃ (Tc)
2-6
Dust-proof
Water-proof
ㆍIP66 for CE Marking
※ Ambient temperature without operation
ㆍDamp Location for UL Marking
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
No.
ARTICLE
PAGE
0.1
7/11
SPECIFICATIONS
Electrical Specification of Platform LED Module (stabilized at Tc~65℃)
Article
Symbol
MIN
TYP
MAX
Unit
Remarks
Power Consumption
P
-
21
25
W
30V x 0.7A, module only
Operating Current
Iop
-
700
700
㎃
per 1 Module
[700mA /PKG 1EA,TYP.]
Operating Voltage
Vdc
26.0
30
33.0
V
per 1 Module
[3.0V/PKG 1EA, TYP.]
10 LEDs in Series
Type Classification
2-7
Eye Protection
ㆍBuilt-in module
ㆍRisk Group 2
Working Voltage for
ㆍ50V
Insulation
※ The power consumption for a specific module is dependent on the operating voltage
distribution across the modules in parallel connection. The maximum operating current
means the highest limit in any operating condition.
※ Typical and Maximum Operating Current may have ±5%, and
Tolerance and measurement tolerance of Vf becomes ± 0.3V in the value
※ Voltage difference between modules are tightly controlled to be less than 1.0V so that
the maximum current of any module can be limited to 700mA. Voltage bins of modules
will be designated on the module label and box label.
※ Safety and wiring information will be described in Electrical Application Notes.
※ We recommend users to attach the surge protector to a PSU or to use a PSU that
equipped surge protect circuit suitable for the user's atmosphere condition.
3. PARTS SPECIFICATIONS
No.
ARTICLE
3-1
Lens Cover
Screw
3-2
SPECIFICATIONS
ㆍMaterial : Stainless Steel with Teflon Washer
ㆍLocation : between the array lens and heat sink
ㆍMaterial : Polycarbonate
ㆍThickness : 2.0 ㎜
Array Lens Cover ㆍLens Type : Type Ⅱ-M(1)
ㆍUL-94 Flammability : V-2
※ Protective Equipment in Luminaries needs to prevent flaming drips.
3-3
Seal Rubber
3-4
LED Board
3-5
Side Inlet
Harness
3-6
Heat Sink
(without Fin)
ㆍMaterial : Molded Silicone
ㆍLED : Ceramic PKG, CCT 3000K, CRI min. 70
ㆍMaterial : MCPCB, Aluminum
ㆍThickness : 1.6 ㎜
ㆍStainless Steel Screws : 3ea
ㆍMaterial : Molded PVC coated with Sealant Silicone, 105℃ rating
ㆍWires : 24 AWG, 105℃ rating
ㆍLength(wires) : 550 ㎜
ㆍMaterial : Die-cast Aluminium
ㆍThermal Pad between the PCB and Heat Sink
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
0.1
PAGE
8/11
4. APPEARANCE AND STRUCTURE
No.
ARTICLE
4-1
Appearance
and
Dimension
(Type Ⅱ-M(1))
SPECIFICATIONS
※ Appearance is different for various optical solutions depending on
the combination of the 10 core lenses. Critical dimensions are all the
same for the optical solutions except for the thickness difference at
the core lens cross-section. Detailed information on the lenses are
described in Optical and Mechanical Application Notes.
4-2
Structure
(Type Ⅱ-M(1))
Labelling for
4-3
Vf Binning
SL-P7V2
F32MBKI
NC13
E00019
NP
3000K-S
SL-P7V2
F32MBKI
NC13
000004 30
Vf bin
SL-P7V2F32MBKI
30
(General)
Vf bin
[LED Board Label]
[Module Label]
[Box Label]
DATE OF ISSUE : June 03, 2015
Document No.
LED Module
P7V2F32MBKI-0.1
REV.NO.
0.1
5. PACKING SPECIFICATION
5-1 Packing Method
5-1-1 Inner Box : 12 modules of the same Vf bin in one inner box
12 PCs/Inner Box
5-1-2 Outer Box : 24 modules on 2 stacks of inner boxes in one outer box
2 Stacks of Inner Boxes
(419 x 240 x 189)
5-2 Pallet : 32 boxes(768 modules) on one pallet
※ Two stacks of pallets are allowed.
PAGE
9/11
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
0.1
6. LABEL Structure
6-1 LED Board Label
Number
Item
Description
①
Model Number (Product Code)
year: A:00, B:01,……H:07, I:08,……
②
SMT Date Code
month: 1,2,3,45,6,7,8,9,A,B,C
day:01,02,03,04,05,……31
③
SMT Line
-
④
Serial Number
00001 ~ 99999
⑤
LED Binning Code
-
⑥
CCT
3000K / 4000 K / 5000 K
⑦
LED Maker
S: Samsung
6-2 Module Label
Number
Item
Description
①
Model Number (Product Code)
year: A:00, B:01,……H:07, I:08,……
②
Production Date Code
month: 1,2,3,45,6,7,8,9,A,B,C
day:01,02,03,04,05,……31
③
Serial Number
00001 ~ 99999-
④
CCT
3000K / 4000K / 5000K
⑤
Manufacturing Location
KO (Country / Korea) + SIL (Factory)
⑥
Vf Binning Code
-
PAGE
10/11
DATE OF ISSUE : June 03, 2015
Document No.
P7V2F32MBKI-0.1
REV.NO.
LED Module
0.1
6-3 Outer Box Label
SL-P7V2F32MBKI
Number
Item
Description
①
Model Number (Product Code)
-
②
Lot No.
Factory Code (2) + Production Date (4) + Serial No. (4)
③
Country of Origin
KOREA
④
Packing Quantity
24 pc
⑤
Production Date (year/week#)
yyww
⑥
Label Printing Date (year/month/date)
yy/mm/dd
PAGE
11/11