TVS PROTECTION PRODUCT BRIEF RClamp® 0506T KEY FEATURES • Low profile (0.4mm high, 0.5mm pitch) • Low capacitance (0.3pF line-to-line, typical) • Flow-through design • Ultra low clamping voltage FEATURE BENEFITS • Meets low profile requirements • Maintains signal integrity • Reduces trace discontinuities for easy PCB layout • Protects latest sensitive IC’s RClamp® 0506T APPLICATIONS LOW CAPACITANCE TVS ARRAY • USB 3.0 • HDMI 1.4 • µSD card interfaces • MMC card interfaces • MDDI/MIPI interfaces PACKAGING • 8-pin SLP3313P6T The RClamp®0506T has a maximum capacitance of only 0.80pF. This allows it to be used on circuits operating in excess of 2.0GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). Each device is designed to protect six lines operating up to 5 volts. RClamp0506T measures 3.3 x 1.3 x 0.4mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free NiPdAu. They are designed for easy PCB layout by allowing the traces to run straight through the device. The combination of small size, low capacitance, and high level of ESD protection makes them a flexible solution for applications such as HDMI, USB 3.0, MDDI, and multimed a card interfaces. RClamp0506T flow-through design www.semtech.com 1 TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 0506T - Absolute Maximum Rating Maximum Rating Symbol Value Unit Peak Pulse Power (tp = 8/20us) Ppk 75 Watts Peak Pulse Power (tp = 8/20us) Ipp 5 A ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact) VESD ±18 ±12 kV Operating Temperature Tj -55 to +125 °C Storage Temperature TSTG -55 to +150 °C Parameter Symbol Condition Reverse Stand-Off Voltage VRWM Reverse Breakdown Voltage VBR Reverse Leakage Current IR VRWM = 5V, T = 25°C Clamping Voltage VC Ipp = 5A, tp = 8/20µs Electrical Characteristics (T=25°C) Junction Capacitance Min Typ Max Units 5 V 8 11 V 0.005 0.100 µA 15 V 0.8 pF 6.5 Any I/O to Gnd VR = 0, f = 1MHz Cj 0.7 I/O to I/O VR = 0, f = 1MHz CIRCUIT DIAGRAM 0.4 PACKAGE DIMENSIONS 3.30 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 0.5 BSC Pin 6 1 6 1.30 Pin 7, 8 8 7 1.25 ORDERING INFORMATION RClamp0506T.TCT 0.40 Working Voltage Qty Per Reel Reel Size 5V 3,000 7 inches visit www.semtech.com for more 200 Flynn Road, Camarillo, California 93012 • phone: (805) 498-2111 • fax: (805) 498-3804 Semtech and the Semtech logo are registered marks of Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. ©2015 Semtech Corporation. All rights reserved. RC0506T-PB15