Data Sheet AM321A_AE Part Number : SPMAMT3215A0 SPMAMT3215A0 Introduction Part Number : SPMAMT3215A0 Compact Power Lighting Source Features Package: Ag plated 2 pad design package with silicone resin View Angle : 120˚ Typical wavelength : 590nm Optical efficiency : 60 lm/W Precondition : JEDEC Level 2a ESD Withstanding Voltage : up to ±2kV [HBM] Reliability Test : AEC Q-101 qualified Applications traffic lights back lighting (LCD, switches, keys, displays, illuminated advertising) interior and exterior automotive lighting (e.g. dashboard back lighting and brake lights) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire Environmental Compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the LED product: Cd,Pb,Hg,PBBs,PBDEs and Cr6+ 2015/08/03/Rev.06 - 1 - SPMAMT3215A0 Table of Contents Part Number Description ------------------------ 3 Characteristic ------------------------ 4 Typical Characteristic ------------------------ 4 Luminous intensity Bin ------------------------ 4 Forward Voltage Bin ------------------------ 5 Dominant Wavelength Bin ------------------------ 5 Absolute Maximum Rating ------------------------ 6 Typical Characteristic Graph ------------------------ 7 Mechanical Dimension ------------------------ 11 Soldering Information ------------------------ 12 Packing Information ------------------------ 13 Product Labeling Information ------------------------ 15 Reliability Test Condition ------------------------ 16 Precaution for Use ------------------------ 17 Revision History ------------------------ 19 Company Information ------------------------ 19 2015/08/03/Rev.06 - 2 - SPMAMT3215A0 Part Number Description The Part number designation is explained as follows : SP M AM T 321 5 A 0 AB CD EF AB C DE F GHI J K L MN OP QR Where: AB - designates company name and Samsung LED PKG (SP for Samsung LED PKG) C - designates power variant (M or automotive Middle Power) DE - designates color variant (AM for automotive AMBER and single color) F - designates LED PKG version (value T for initial version) GHI - designates product configuration and type J - designates operating condition (value 5 for 50mA) K - designates specific property L - designates CRI variant (value 0 for discrete color) MN - designates forward voltage property OP - designates CIE coordination property QR - designates luminous intensity property 2015/08/03/Rev.06 - 3 - SPMAMT3215A0 Characteristics Typical Characteristics [Tj =25℃] Parameter [1] Symbol Value Unit Forward voltage (I F = 50mA) VF 2.20 V Reverse current (V R = 5V) IR 10 ㎂ Peak Wavelength (I F = 50mA) λ Peak 590.0 ㎚ Dominant Wavelength (I F = 50mA) λ Dom 590.5 ㎚ Spectral bandwidth at half maximum △λ 15 ㎚ TCλ Peak 0.13 ㎚/K TCλ Dom 0.07 ㎚/K TCV -2.14 ㎷/K Temperature coefficient of peak wavelength (I F = 50mA, Temperature coefficient of dominant wavelength (I F = 50mA, Temperature coefficient of forward voltage (I F = 50mA, -30℃≤ T≤ 80℃) [1] Luminous Intensity Bin[2] Symbol I V, Φ V Condition I F = 50mA [Tj =25℃] Luminous Intensity Luminous Flux[3] I V [cd] Φ V [lm] Bin Code Min. Max. Min. Max. AB 1.40 1.80 4.20 5.40 BA 1.80 2.24 5.40 6.72 BB 2.24 2.80 6.72 8.40 * Note [1] Measurement condition : LED(T J ) = Ambient temperature(T A ), by applying pulse current for under 25 ms. [2] Luminous intensity measuring equipment : CAS140CT I V and V F tolerances are ±10% and ±0.1 V, respectively. [3] Luminous flux value is just reference purposes. LED are sorted by the value of luminous intensity. 2015/08/03/Rev.06 - 4 - SPMAMT3215A0 Forward Voltage Bin[2] Symbol VF Condition [1] [Tj =25℃] Bin Code Min. Typ. Max. E1 1.75 - 1.90 E2 1.90 - 2.05 E3 2.05 - 2.20 I F = 50mA V E4 2.20 - 2.35 E5 2.25 - 2.50 E6 2.50 - 2.65 [1] • Dominant Wavelength Bin[4] Symbol λD Condition I F = 50mA [Tj =25℃] Bin Code Min. Typ. Max. B1 586 - 589 B2 589 - 592 B3 592 - 595 * Note [4] Wavelength measuring equipment : CAS140CT tolerance ±2 nm 2015/08/03/Rev.06 Unit - 5 - Unit nm SPMAMT3215A0 Absolute Maximum Ratings Parameter Symbol Value Unit Operating temperature range T opr -40 ~ 100 ℃ Storage temperature range T stg -40 ~ 100 ℃ Junction temperature T jmax 125 ℃ IF 70 mA I FM 100 mA VR 5 V R thJ-S 70 K/W P tot 180 ㎽ - ±2 kV Maximum forward current[5] (T J : 25℃)[6] Maximum peaked current (T J : 25℃)[6] Reverse voltage (T J : 25℃)[6] Thermal resistance (Junction to soldering point) Power consumption (T J : 25℃)[6] ESD sensitivity(HBM) * Notes [5] Unpredictable performance may be resulted by driving the product at below Min. I F or above Max. IF. [6] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms.. 2015/08/03/Rev.06 - 6 - SPMAMT3215A0 Typical Characteristics Graph Typical Spectrum : I F = 50 mA, T J = 25°C[6] Relative Wavelength vs Angle : I F = 50mA, T J = 25°C[6] 2015/08/03/Rev.06 - 7 - SPMAMT3215A0 Relative Luminous Intensity & Forward Voltage vs Forward Current : T J = 25°C[6] Relative Wavelength vs Forward Current : T J = 25°C[6] 2015/08/03/Rev.06 - 8 - SPMAMT3215A0 Relative Luminous Intensity & Forward Voltage vs Temperature : Reference point_25℃, I F = 50mA Relative Wavelength vs Temperature : Reference point_25℃, I F = 50mA 2015/08/03/Rev.06 - 9 - SPMAMT3215A0 Typical Radiant Pattern : I F = 50mA, T j 25°C Max. Permissible Forward Current : I F = f (T c ) 2015/08/03/Rev.06 - 10 - SPMAMT3215A0 Mechanical Dimension[7] ② Anode mark ① [Side View] [Top View] [Bottom View] * Note [7] Unit : mm, Tolerance : ±0.10mm Do not place pressure on the encapsulating resin (hatch area) The maximum compressing force is 15N on the polymer • Electric Schematic Diagram ② ① 2015/08/03/Rev.06 - 11 - SPMAMT3215A0 Soldering Conditions Pad Configuration & Solder Pad Layout[8] * Note [8] Unit : mm, Tolerance : ±0.10mm Reflow Soldering Condition (Pb Free) Reflow Frequency : 2 times max. Manual Soldering Condition Not more than 5 seconds @MAX300℃, under soldering iron.(one time only) 2015/08/03/Rev.06 - 12 - SPMAMT3215A0 Packing Information Taping[9] A B 4.0 ±0.10 4.0 ±1.0 C 2.0 ± D 0.05 1.75 ± E 0.10 5.5 ± F 12.0 ± 0.05 G 0.10 3.2 ± H 3.83 ± 0.10 I 0.10 0.23 ± J 2.17 ± 0.02 * Note [9] Unit : mm, Cumulative tolerance/10 pitches to be ±0.2mm LED taping quantity : 2,000EA / Reel. Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10˚ angle to be the carrier tape. Reel[10] A 180.0 B -3.0 60 ±1.0 C 13.0 W1 ± 0.3 [10] Unit : mm 2015/08/03/Rev.06 - 13 - 13.0 ± 0.5 W2 15.4 ± 1.0 0.10 SPMAMT3215A0 • Packing Box information Dimension of Transportation Box in mm Width Length Height Reels/box 245 220 182 Up to 10 Reels 245 220 86 Up to 5 Reels 2015/08/03/Rev.06 - 14 - SPMAMT3215A0 Product Labeling Information Label Information ABCDEF Bin Code Part Number Lot Number SPMAMT3215A0CEKBSB XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 1,000 PCS IIIIIIIIIIIIIIIIIIIIIIIII 현재 이 이미지를 표시할 수 없습니다. 1. Bin Code AB : Forward Voltage(V F ) Bin CD : Chromaticity Coordinate Bin EF : Luminous Intensity(I V ) Bin 2. Lot No. ①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 2,000 PCS ① : Production Site (S:SAMSUNG KOREA, G:TIANJIN CHINA) ② ④ : L (LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (X:2013, Y:2014, Z:2015 ...) ⑤ : Month (1 ~ 9, A, B, C) ⑥ : Day (1 ~ 9, A, B ~ V) ③ ⑦⑧⑨ : SAMSUNG ELECTRONICS Product number (1 ~ 999) ⓐⓑⓒ : Reel Number (1 ~ 999) 2015/08/03/Rev.06 - 15 - SPMAMT3215A0 Reliability Test Conditions For detailed Information please contact your SAMSUNG Sales partner 2015/08/03/Rev.06 - 16 - SPMAMT3215A0 Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung Electronics, they should be packed by a sealed container with nitrogen gas injected.(Shelf life of sealed bags: 12 months, temp. ~40 ℃, ~90 % RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than 30 ℃/60 %RH, b. Stored at <10 %RH. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60 % at 23±5 ℃. 8) Devices must be baked for 1 day at 65±5 ℃, if baking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 2015/08/03/Rev.06 - 17 - SPMAMT3215A0 10) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. 2015/08/03/Rev.06 - 18 - SPMAMT3215A0 Revision History Date Revision History 2010.05.20 Author Drawn Approved Initial Edition - Preliminary W.H Jung Y.C Kim 2010.06.08 Wavelength change W.H Jung Y.C Kim 2012.10.08 Specification format change J.C. Kang S.H. Lee 2012.11.07 Electric Schematic incorrect change J.C. Kang S.H. Lee 2013.02.15 Precaution Revision J.C. Kang S.H. Lee 2014.01.28 Addition of box size J.C. Kang S.H. Lee 2015.08.03 Modify of Packing Information G.W. Park S.B. Kwak Company Information US - Samsung US, Inc. 10F, 6 Concourse Parkway, Atlanta,GA 30328, U.S.A TEL. +1-770-390-0325 FAX. +1-770-390-0326 Europe - Samsung Europe GmbH D-65824, Arcus Center 3F, Am Kronberger Hang 5, Schwalbach/TS, Germany TEL. +49-6196-66-6400, 6440 FAX. +49-6196-66-6429 Japan Roppongi T-Cube Building, 3-1-1, Roppongi, Minato-Ku, Tokyo 106-8532, Japan TEL. +81-3-6234-2190, FAX. +81-3-6234-2568 China (Shenzhen) Rm 4501, 45/F, New World Center, Yitian Road, Futian District, Shenzhen 518026, China TEL. +86-755-8608-5550 FAX. +86-755-8608-5566 Copyright @1995-2012 Samsung Electronics Co.Ltd China (Shanghai) All rights reserved San #24 Nongseo-Dong, Giheung-Gu, 25F, Shanghai International Trade Center, 2201 Yan-An Road(West), Shanghai 200336,China TEL. +86-21-3356-1177 FAX. +86-21-3356-1177 Yongin-City, Gyeonggi-Do 446-711 Korea www.samsung.com/sec Sales Contact : [email protected] 2015/08/03/Rev.06 Stheast Asia Samsung Hub #23-02, 3 Church Street, Singapore 049483, Singapore TEL. +65-6833-3217 FAX. +65-6833-3243~4 - 19 -