End of Life. Last Available Purchase Date is 29-Apr-2016 CL www.vishay.com Vishay Dale Wirewound Resistors, Commercial Power, Tab Type Terminals FEATURES • • • • Variety of core diameters and length Numerous mounting hole sizes and shapes High performance for low cost Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Appliance applications include food mixers, coffee makers, electric and electronic ranges, electric blankets, actuating heaters for bi-metal switches, toasters and deep fryers. Other applications include toys, entertainment devices such as television, radio and amplifiers. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P25 °C W 3.8 4 5 6 8 9 12 5.7 6 8 10 12 14 18 HISTORICAL MODEL (1) GLOBAL MODEL (1) TOLERANCE ±% RESISTANCE RANGE Ω WEIGHT (typical) g CL4095 CL-4095 0.10 to 685 5, 10 1.08 CL4100 CL-4100 0.11 to 740 5, 10 1.09 CL4125 CL-4125 0.15 to 1.02K 5, 10 1.16 CL4150 CL-4150 0.19 to 1.35K 5, 10 1.23 CL4200 CL-4200 0.27 to 1.86K 5, 10 1.37 CL4225 CL-4225 0.31 to 2.14K 5, 10 1.44 CL4300 CL-4300 0.43 to 2.99K 5, 10 1.65 CL6095 CL-6095 0.10 to 175 5, 10 2.30 CL6100 CL-6100 0.10 to 190 5, 10 2.35 CL6133 CL-6133 0.13 to 285 5, 10 2.68 CL6167 CL-6167 0.18 to 380 5, 10 2.97 CL6200 CL-6200 0.22 to 475 5, 10 3.35 CL6233 CL-6233 0.27 to 570 5, 10 3.68 CL6300 CL-6300 0.35 to 765 5, 10 4.35 Note (1) CL4000 and CL6000 model numbers are calculated from the CL4000 power rating of 4 W per inch and CL6000 power rating of 6 W per inch. The last three digits of the model number represent the mounting center spacing of the resistor in inches (decimal is between the first and second digit, mounting center spacing is available between 0.95" [24.13 mm] and 3.00" [76.20 mm]). Example: CL6133 = 1.33 inches x 6 W per inch = 8 W. TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient Short Time Overload Maximum Working Voltage Operating Temperature Range Terminal Strength UNIT ppm/°C V °C lb CL RESISTOR CHARACTERISTICS ± 300 for 1.0 Ω and above; ± 600 below 1.0 Ω 5 x rated power for 5 s (P x R)1/2 -65 to +375 10 minimum GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CL4100XX100RJB1410 C L 4 1 0 0 X X 1 0 0 R J B 1 4 1 0 GLOBAL MODEL LEFT TERMINAL RIGHT TERMINAL VALUE TOLERANCE PACKAGING SPECIAL (see Standard Electrical Specifications Global Model column for options) A B C D F X = custom A B D E F X = custom R = decimal K = thousand R150 = 0.15 Ω 1K00 = 1000 Ω J = ± 5.0 % K = ± 10.0 % B14 = lead (Pb)-free bulk B31 = lead (Pb)-free four layer bulk (dash number) (up to 2 digits) from 1 to 99 as applicable Historical Part Numbering example: CL-4100XX-10 100 Ω 5 % B14 CL-4100XX-10 HISTORICAL MODEL Revision: 22-Dec-15 100 Ω RESISTANCE VALUE 5% TOLERANCE CODE B14 PACKAGING Document Number: 30222 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life. Last Available Purchase Date is 29-Apr-2016 CL www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] B C D F 0.140 [3.56] 0.140 [3.56] A Left terminal E Right terminal G DIMENSIONS in inches [millimeters] GLOBAL MODEL A ± 0.020 [0.508] 0.95 [24.13] 1.00 [25.40] 1.25 [31.75] 1.50 [38.10] 2.00 [50.80] 2.25 [57.15] 3.00 [76.20] 0.95 [24.13] 1.00 [25.40] 1.33 [33.78] 1.67 [42.42] 2.00 [50.80] 2.33 [59.18] 3.00 [76.20] CL4095 CL4100 CL4125 CL4150 CL4200 CL4225 CL4300 CL6095 CL6100 CL6133 CL6167 CL6200 CL6233 CL6300 B TYPICAL 0.105 [2.67] 0.105 [2.67] 0.105 [2.67] 0.105 [2.67] 0.105 [2.67] 0.105 [2.67] 0.105 [2.67] 0.170 [4.32] 0.170 [4.32] 0.170 [4.32] 0.170 [4.32] 0.170 [4.32] 0.170 [4.32] 0.170 [4.32] C ± 0.010 [0.254] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] 0.344 [8.73] D ± 0.010 [0.254] 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.475 [12.07] 0.575 [14.61] 0.575 [14.61] 0.575 [14.61] 0.575 [14.61] 0.575 [14.61] 0.575 [14.61] 0.575 [14.61] E ± 0.005 [0.127] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.018 [0.46] 0.018 [0.46] 0.018 [0.46] 0.018 [0.46] 0.018 [0.46] 0.018 [0.46] 0.018 [0.46] TERMINAL HOLE OPTIONS AND DIMENSIONS in inches [millimeters] GLOBAL MODEL CL4000 F ± 0.010 [0.254] 0.130 [3.30] 0.172 [4.37] 0.200 [5.08] 0.128 [3.25] 0.130 [3.30] 0.172 [4.37] 0.200 [5.08] 0.180 [4.57] G ± 0.010 [0.254] 0.160 [4.06] 0.210 [5.33] 0.220 [5.59] 0.128 [3.25] 0.160 [4.06] 0.210 [5.33] 0.220 [5.59] 0.180 [4.57] RIGHT OPTION A B D E A B E F MATERIAL SPECIFICATIONS DERATING Element: nickel-chrome alloy or copper-nickel alloy, depending on resistance value RATED POWER IN % CL6000 LEFT OPTION A B C D A B C F Core: woven fiberglass Terminals: electro tin plated steel Part Marking: resistance is stamped on terminal in two places, maximum of three characters F ± 0.010 [0.254] 0.130 [3.30] 0.172 [4.37] 0.128 [3.25] 0.200 [5.08] 0.130 [3.30] 0.172 [4.37] 0.200 [5.08] 0.180 [4.57] G ± 0.010 [0.254] 0.160 [4.06] 0.210 [5.33] 0.128 [3.25] 0.210 [5.33] 0.160 [4.06] 0.210 [5.33] 0.210 [5.33] 0.180 [4.57] 120 100 80 60 40 20 0 - 65 - 50 0 25 75 150 225 300 375 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST Thermal Shock Short Time Overload Low Temperature Operation Humidity Load Life Resistance to Solder Heat Revision: 22-Dec-15 CONDITIONS OF TEST -55 °C to +275 °C, 5 cycles, 30 min dwell time 5 x rated power for 5 s -65 °C, full rated working voltage for 45 min 75 °C, 90 % to 100 % RH, 240 h 1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body TEST LIMITS (EIA RS-344) ± (5.0 % + 0.05 Ω) ΔR ± (4.0 % + 0.05 Ω) ΔR ± (3.0 % + 0.05 Ω) ΔR ± (5.0 % + 0.05 Ω) ΔR ± (10.0 % + 0.05 Ω) ΔR ± (4.0 % + 0.05 Ω) ΔR Document Number: 30222 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000