MTL Datasheet

Product is End of Life Apr-2016 and Replaced by LVR
MTL
www.vishay.com
Vishay Huntington
Wirewound Resistors, Commercial Power, Axial Lead, Low Value
FEATURES
• Ideal for all types of current sensing
applications including switching and linear
power supplies, instruments and power
amplifiers
• Low inductance - less than 10 nH
• Cooler operation for high power to size ratio
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Please reference the Vishay Dale closest equivalent:
LVR (www.vishay.com/doc?30206).
Notes
• There may be slight differences between the MTL product and
the LVR product.
• See the cross-reference file for a complete list of differences and
part number crosses:
www.vishay.net/files/Cross-Reference%20Data%20-%20PTNDR-019-2015%20Rev%200.pdf.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
POWER RATING
P25 °C
W
HISTORICAL
MODEL
RESISTANCE
RANGE

TOLERANCE
±%
MTL1A
MTL-1A
1
0.003 to 0.1
1, 5
MTL2B
MTL-2B
2
0.003 to 0.1
1, 5
MTL03
MTL-3
3
0.003 to 0.1
1, 5
MTL05
MTL-5
5
0.003 to 0.1
1, 5
MTL06
MTL-6
6
0.003 to 0.1
1, 5
MTL10
MTL-10
10
0.003 to 0.1
1, 5
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Temperature Coefficient
MTL RESISTOR CHARACTERISTICS
ppm/°C
See TCR vs. Resistance Value chart
Ib
5 min (MTL1A) and 10 min (MTL2B and larger)
Terminal Strength
VAC
500 for MTL1A; 1000 for MTL2B and larger
Maximum Working Voltage
Dielectric Withstanding Voltage
V
(P x R)1/2
Operating Temperature Range
°C
-55 to +275
Insulation Resistance

1000 M min.
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: MTL1A5L000FE66 (Visit www.vishay.net SAP Parts Manual for all options)
M
T
L
1
A
5
L
0
0
0
F
E
6
6
GLOBAL MODEL
(5 digits)
VALUE
(5 digits)
TOLERANCE
(1 digit)
PACKAGING CODE
(3 digits)
SPECIAL
(up to 3 digits)
MTL1A
MTL2B
MTL03
MTL05
MTL06
MTL10
R = Decimal
L = m
(below 0.01 )
5L000 = 0.005 
R1000 = 0.1 
F=±1%
J=±5%
E66 = Bulk pack
(Dash Number)
From 1 to 999
as applicable
Historical Part Number example: MTL-1A-0.005-1 %
MTL-1A
0.005 
1%
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE
Revision: 21-Mar-16
Document Number: 31828
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Product is End of Life Apr-2016 and Replaced by LVR
MTL
www.vishay.com
Vishay Huntington
DIMENSIONS in inches [millimeters]
1.50 [38.10]
min.
L
LD
D
DIMENSIONS in inches [millimeters]
GLOBAL MODEL
L
± 0.020 [0.508]
D
± 0.020 [0.508]
LD
± 0.002 [0.051]
MTL1A
0.430 [10.92]
0.120 [3.05]
0.025 [0.635]
MTL2B
0.580 [14.73]
0.200 [5.08]
0.032 [0.813]
MTL03
0.600 [15.24]
0.250 [6.35]
0.032 [0.813]
MTL05
0.890 [22.61]
0.335 [8.51]
0.040 [1.02]
MTL06
1.055 [26.80]
0.395 [10.03]
0.040 [1.02]
MTL10
1.755 [44.58]
0.355 [9.02]
0.040 [1.02]
TCR VS. RESISTANCE VALUE
MATERIAL SPECIFICATIONS
Encapsulation: Molded epoxy
Terminal: Matte Tin
Part Marking: HEI, model, value, tolerance, date code
Note
• Due to resistor size limitations some resistors will have minimal
information marked on parts.
TCR IN ppm/°C
Element: Nickel-chrome alloy
500
400
300
200
100
0
0
0.01
0.03
0.05
0.07
0.09
0.11
RESISTANCE VALUE IN Ω
RATED POWER IN %
DERATING
120
100
80
60
40
20
0
- 55
0
50
25
100
150
200
250
300
350
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
Temperature Cycling
-40 °C for 30 min/+125 °C for 30 min/1000 h
± 1 % R
Short Time Overload
5 x rated power for 5 s
± 1 % R
Moisture Resistance
+40 °C 90 % to 95 % RH, 0.1 WDC , 1000 h
± 1 % R
Load Life
1000 h at rated power, +70 °C, 1.5 h “ON”, 0.5 h “OFF”
± 1 % R
Revision: 21-Mar-16
Document Number: 31828
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000