AVT www.vishay.com Vishay Huntington Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Tubular FEATURES • High temperature vitreous coating • Complete welded construction • Tight tolerance of 5 % for values above 1 • Excellent stability in operation (< 3 % change in resistance) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W RESISTANCE RANGE RESISTANCE RANGE ±5% ± 10 % WEIGHT (typical) g AVT010 AVT-10 12 0.1 to 10.2K 0.1 to 10.2K 6.69 AVT020 AVT-20 20 1.0 to 18K 1.0 to 18K 12.57 AVT20A - 15 1.0 to 60K 0.10 to 60K 8.64 AVT025 AVT-25 25 0.1 to 23K 0.1 to 23K 20.72 AVT25A AVT-25A 30 0.1 to 30K 0.1 to 30K 20.72 AVT25B AVT-25B 30 0.1 to 24K 0.1 to 24K 14.25 AVT050 AVT-50 50 0.1 to 57K 0.1 to 57K 42.08 AVT50A AVT-50A 60 0.1 to 75K 0.1 to 75K 65.64 AVT50B AVT-50B 70 0.1 to 84.3K 0.1 to 84.3K 64.82 AVT075 AVT-75 75 0.1 to 85.5K 0.1 to 85.5K 106.37 AVT75A AVT-75A 90 0.1 to 114K 0.1 to 114K 183.82 AVT080 - 90 1.0 to 190K 0.10 to 190K 121.58 AVT100 AVT-100 100 0.1 to 132K 0.1 to 132K 91.37 AVT130 AVT-130 130 0.1 to 192K 0.1 to 192K 192.36 AVT160 AVT-160 175 0.1 to 398K 0.1 to 398K 250.8 AVT175 - 175 1.0 to 500K 0.10 to 500K 250.8 AVT200 AVT-200 225 0.1 to 337K 0.1 to 337K 309.97 AVT225 AVT-225 225 0.1 to 337K 0.1 to 337K 309.97 Revision: 03-Jun-16 Document Number: 31841 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVT www.vishay.com Vishay Huntington GLOBAL PART NUMBER INFORMATION Global Part Numbering example: AVT02506E25R00JE (visit www.vishay.net SAP parts manual for all options) A V T GLOBAL MODEL (6 digits) (see Standard Electrical Specifications Global Model column for options) 0 2 5 0 TERMINAL DESIGNATION (2 digits) TERMINAL FINISH (1 digit) 05 06 14 15 20 FC = ferrule cap E = lead (Pb)-free 6 E 2 5 R 0 0 J E VALUE (5 digits) TOLERANCE (1 digit) PACKAGING CODE (1 digit) SPECIAL (up to 2 digits) R = decimal K = thousand 1R500 = 1.5 1K500 = 1.5 k J=±5% K = ± 10 % E = lead (Pb)-free cell and bulk pack (dash number) from 1 to 99 as applicable 91 = 100 style horizontal high bracket 92 = 200 style push-in bracket 93 = 300 style thru-bolt bracket NI = non-inductive NP = non-inductive + 92 style push-in bracket NH = non-inductive + 91 style horizontal bracket NV = non-inductive + style vertical bracket Historical Part Number example: AVT-25-25-5 % AVT-25 25 5% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE Revision: 03-Jun-16 SPECIAL Document Number: 31841 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVT www.vishay.com Vishay Huntington DIMENSIONS in inches (millimeters) TERMINAL SETBACK DISTANCE CENTER TO CENTER A O.D. I.D. LENGTH CORE DIMENSIONS O.D. I.D. LENGTH ± 0.031 ± 0.031 (0.79) (0.79) 1.750 0.313 0.188 (44.45) (7.95) (4.78) 2.000 0.438 0.260 (50.8) (11.13) (6.60) 1.500 0.438 0.313 (38.10) (11.11) (7.94) 2.000 0.563 0.313 (50.8) (14.30) (7.95) 2.000 0.750 0.500 (50.8) (19.05) (12.7) 2.000 0.625 0.453 (50.8) (15.88) (11.51) 4.000 0.563 0.313 (101.6) (14.30) (7.95) 4.000 0.750 0.500 (101.6) (19.05) (12.70) 4.500 0.750 0.547 (114.3) (19.05) (13.89) 6.000 0.563 0.313 (152.4) (14.30) (7.95) 6.000 0.750 0.500 (152.4) (19.05) (12.70) 4.000 1.125 0.750 (101.6) (28.58) (19.05) 6.500 0.750 0.500 (165.1) (19.05) (12.70) 6.500 1.125 0.750 (165.1) (28.58) (19.05) 8.500 1.125 0.750 (215.9) (28.58) (19.05) 8.500 1.125 0.750 (215.9) (28.58) (19.05) 10.500 1.125 0.750 (266.7) (28.58) (19.05) A (MAX.) MODEL 0.406 (10.31) 0.563 (14.30) 0.563 (14.30) 0.668 (17.48) 0.906 (23.01) 0.770 (19.56) 0.688 (17.48) 0.906 (23.01) 0.906 (23.01) 0.688 (17.48) 0.906 (23.01) 1.313 (33.34) 0.906 (23.01) 1.313 (33.35) 1.313 (33.35) 1.313 (33.34) 1.313 (33.35) AVT010 AVT020 AVT20A AVT025 AVT25A AVT25B AVT050 AVT50A AVT50B AVT075 AVT75A AVT080 AVT100 AVT130 AVT160 AVT175 AVT200 AVT225 TERMINAL SETBACK ± 0.031 (0.79) 0.094 (2.39) 0.094 (2.39) 0.094 (2.38) 0.094 (2.39) 0.094 (2.39) 0.094 (2.39) 0.094 (2.39) 0.062 (1.57) 0.125 (3.18) 0.094 (2.39) 0.094 (2.39) 0.219 (5.56) 0.125 (3.18) 0.282 (7.16) 0.267 (6.78) 0.219 (5.56) 0.266 (6.76) TERMINAL DESIGNATION OPTIONAL STANDARD (QUICK CONNECT) DISTANCE CENTER TO CENTER (REF.) 1.375 (34.93) 1.625 (41.28) 0.937 (23.80) 1.562 (39.67) 1.562 (39.67) 1.562 (39.67) 3.562 (90.47) 3.626 (92.10) 4.000 (101.60) 5.562 (141.27) 5.562 (141.27) 2.812 (71.42) 6.000 (152.40) 5.374 (136.50) 7.404 (188.06) 7.312 (185.72) 9.406 (238.91) SLIDER MODEL NUMBER 05 14 70 02 14 70 02 14 - 06 15 71 06 15 72 06 15 71 06 15 71 06 15 71 06 15 72 06 15 71 06 15 72 20 15 - 06 15 72 20 15 73 20 15 73 20 15 - 20 15 73 TERMINAL DIMENSIONS in inches (millimeters) DIMENSIONS D A C Style 05, 06, and 20 Revision: 03-Jun-16 A D 02 05 06 14 15 A 0.375 (9.53) 0.188 (4.76) 0.188 (4.76) 0.250 (6.35) 0.188 (4.76) 0.250 (6.35) B 0.562 (14.27) 0.393 (9.98) 0.393 (9.98) 0.500 0.563 0.594 (12.70) (14.29) (15.08) C (HOLE DIAMETER) 0.204 (5.18) 0.133 (3.38) 0.133 (3.38) 0.172 (4.36) 0.050 (1.27) 0.065 (1.65) D 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.031 (0.79) C B Styles 14 and 15 B TERMINAL STYLE 20 Document Number: 31841 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVT www.vishay.com Vishay Huntington AVT SLIDERS-DIMENSIONS in inches (millimeters) GLOBAL GLOBAL PART NUMBER (1) PART NUMBER (RoHS COMPLIANT) FOR EXTRA SLIDERS 75008602E29 AVT010, AVT020 Width Hole dia. DIMENSIONS SLIDER MODEL TYPE WIDTH HEIGHT HOLE DIAMETER 70 0.187 (4.75) 0.516 (13.11) 0.125 (3.18) 75008603E29 AVT025, AVT25B, AVT050, AVT50A, AVT075 71 0.250 (6.35) 0.719 (18.26) 0.141 (3.58) 75008604E29 AVT25A, AVT50B, AVT75A, AVT100 72 0.250 (6.35) 0.844 (21.44) 0.141 (3.58) 75008605E29 AVT130, AVT160, AVT200, AVT225 73 0.312 (7.92) 0.797 (20.24) 0.170 (4.32) Height Note (1) Order HEI slider with global part number. MOUNTING HARDWARE FOR AVT PRODUCTS - Dimensions in inches (millimeters) 91 = 100 Style Horizontal 1 High Bracket 93 = 300 Style Thru-Bolt Bracket B H 0.046 (1.17) C Core length plus “X” BRACKET TYPE 101 MOUNTING C B SLOT 1.063 0.500 0.950 1.000 0.219 x 0.438 0.750 1.375 (26.99) (12.70) (24.13) (25.40) (5.56 x 11.11) (19.05) (34.93) X Y Z H 102 1.063 0.750 0.859 1.250 0.219 x 0.438 0.750 1.750 (26.99) (19.05) (21.83) (31.75) (5.56 x 11.11) (19.05) (44.75) 103 1.063 1.250 1.000 1.500 0.281 x 0.563 0.927 2.125 (26.99) (31.75) (25.40) (38.10) (7.14 x 14.29) (23.55) (53.98) 92 = 200 Style Push-In Bracket BRACKET TYPE 301 302 303 X (APPROXIMATE) 0.373 (9.47) 0.271 (6.88) 0.463 (11.76) THREAD 8 to 32 8 to 32 1/4 to 20 MOUNTING HARDWARE AVAILABLE BRACKET TYPES BY MODEL GLOBAL MODEL Z Y BRACKET TYPE H Core length plus “X” X H Y Z 202 0.478 (12.14) 0.250 (6.35) 0.125 (3.175) 0.375 (9.53) HOLE (DIA.) 0.170 (4.32) 203 0.583 (14.80) 0.580 (14.73) 0.188 (4.78) 0.460 (11.68) 0.115 (2.92) 204 0.700 (17.78) 0.578 (14.68) 0.250 (6.35) 0.500 (12.70) 0.156 (3.96) 205 0.846 (21.49) 0.800 (20.32) 0.375 (9.53) 0.600 (15.24) 0.343 x 0.213 (8.71 x 5.46) 206 0.846 (21.49) 0.800 (20.62) 0.375 (9.53) 0.600 (15.24) 0.343 x 0.213 (8.71 x 5.46) 207 0.700 (17.78) 1.125 (28.58) 0.500 (12.70) 0.687 (17.45) 0.250 x 0.188 (6.35 x 4.78) Revision: 03-Jun-16 AVT010 AVT020 AVT20A AVT025 AVT25A AVT25B AVT050 AVT50A AVT50B AVT075 AVT75A AVT100 AVT130 AVT175 AVT200 AVT225 91 = 100 STYLE HORIZONTAL 1 HIGH BRACKET 92 = 200 STYLE PUSH-IN BRACKET 93 = 300 STYLE THRU-BOLT BRACKET 101 101 101 102 102 102 102 102 102 102 102 102 103 103 103 103 202 203 203 204 206 205 204 206 208 204 206 206 207 207 207 207 301 301 301 301 302 301 302 302 302 301 302 302 302 303 303 303 Document Number: 31841 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVT www.vishay.com Vishay Huntington TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Power Rating W 12 to 225 Resistance Range 1 to 398K Resistance Tolerance % 5, 10 Temperature Coefficient ppm/°C ± 260 for 20 and above, ± 400 for 1 to 19.99 Operating Temperature °C -55 °C to 350 °C Temperature Rise °C 325 °C above an ambient of 25 °C Maximum Altitude f.a.s.l. 10 000 - 10x rated power for 5 s Short-Term Overload Surge Windings Available Maximum Working Voltage (P x R)0.5 1M VRMS 1000 VAC Insultation Resistance Dielectric Voltage Creepage Varies by wattage, see “Terminal Setback” in Dimensions table Terminal Sleeves n/a Inductance μH Varies by wattage and resistance Non-Inductive Winding Available Terminal Strength lb 10 lbs Electrical or Mechanical Customization Contact factory: [email protected] MATERIAL SPECIFICATIONS Element Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core Cordierite, steatite Coating Special high temperature vitreous enamel Standard Terminals Tinned alloy 42 Optional Terminals Alloy 42 Terminal Bands Alloy 42 Part Marking HEI, model, wattage, value, tolerance, date code RATED POWER IN % DERATING 120 100 80 60 40 20 0 0 50 100 150 200 250 300 350 25 AMBIENT TEMPERATURE IN °C Revision: 03-Jun-16 Document Number: 31841 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000