Global Part Numbering Information www.vishay.com Vishay BCcomponents NTC Assemblies 2 GENERAL ORDER INFORMATION Part Number: NTC A SCW E3 103 J N T C A PRODUCT EXECUTION FAMILY NTC A= assemblies S C TYPE W E 3 1 RoHS COMPLIANCE TERMINATION TYPE IMM = immersion type CAP = plastic cap LUG = lug, ring tongue (refer to page 2) SCW = screw PIP = pipe EPX = epoxy KIT = kit, grouping of sensors SRF = surface sensors SLV = sleeve SPE = special E2 = Sn alloy E3 = pure Sn E4 = silver CL = not RoHS 0 3 J R25 VALUE TOLERANCE ON R25 OPTIONAL LEAD LENGTH AND B VALUE 103 = 10 x 103 102 = 10 x 102 101 = 10 x 101 109 = 10 x 100 108 = 10 x 10-1 See spec. for values. F=1% G=2% H=3% J=5% K = 10 % ‘abc’ = blank: standard length and standard B ‘abc’ = L: low B value ‘abc’ = ab: bare length, c: length multiplier and B value c = 0: x 100 and standard B c = 1: x 101 and standard B c = 2: x 102 and standard B c = 4: x 100 and low B c = 5: x 101 and low B c = 6: x 102 and low B Cxxxxx = customized Examples: 520 = 52 x 100 = 52 mm and 3984K 251 = 25 x 101 = 250 mm and 3984K 155 = 15 x 101 = 150 mm and 3435K 106 = 10 x 102 = 1000 mm and 3435K Product Description: 2381 640 7 3 103 2381 640 7 3 103 RoHS COMPLIANCE EXECUTION TYPE TOLERANCE ON R25 R25 VALUE 2381 = yes 2322 = no 640 = standard NTC assemblies 7 = screw type 5=1% 4=2% 6=3% 3=5% 2 = 10 % 103 = 10 x 103 102 = 10 x 102 101 = 10 x 101 109 = 10 x 100 108 = 10 x 10-1 See spec. for values. 641 = NTC insulated leads, customized PVC series 645 = NTC assemblies, sensors 9..... = customized EXAMPLES: • NTC A SCW E3 103 J NTC assemblies screw type e3 termination 10 k 5 %. • NTC A CAP E3 C90066 NTC assemblies plastic cap type e3 customized. Revision: 04-May-16 Document Number: 33036 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Global Part Numbering Information www.vishay.com Vishay BCcomponents GENERAL ORDER INFORMATION Part Number: NTC A LUG E3 C90169 N T C A L U G E 3 C 9 0 1 6 9 PRODUCT FAMILY EXECUTION TYPE TERMINATION CUSTOMIZED NTC A = assemblies LUG = lug ring tongue terminal e2 = Sn alloy e3 = Sn e4 = pure metal other than Sn Cxxxxx Part Number: NTC A LUG03A 103 H 151 N PRODUCT FAMILY NTC T C A L EXECUTION LUG SIZE AND CABLE TYPE A= assemblies See table below U G 0 3 A 1 0 3 H 1 5 1 R25 VALUE TOLERANCE ON R25 OPTIONAL LEAD LENGTH AND B VALUE 103 = 10 x 103 102 = 10 x 102 101 = 10 x 101 109 = 10 x 100 See spec. for values. F=±1% G=±2% H=±3% J=±5% ‘abc’ = blank: standard length and standard B ‘abc’ = L: low B value ‘abc’ = ab: bare length, c: length multiplier and B value c = 0: x 100 and standard B c = 1: x 101 and standard B c = 2: x 102 and standard B c = 4: x 100 and low B c = 5: x 101 and low B c = 6: x 102 and low B Cxxxxx = customized Examples: 520 = 52 x 100 = 52 mm and 3984K 251 = 25 x 101 = 250 mm and 3984K 155 = 15 x 101 = 150 mm and 3435K 106 = 10 x 102 = 1000 mm and 3435K LUG SIZE AND CABLE TYPE STUD SCREW SIZE (METRIC) STUD SCREW SIZE (INCH) HOLE Ø (mm) WIDTH (mm) LENGTH (mm) LUG01A 3.5 5 to 6 3.70 7.20 15.70 LUG01B 3.5 5 to 6 3.70 7.20 15.70 LUG91A M4 8 4.30 7.20 15.70 LUG02A 3.5 5 to 6 3.70 8.50 16.80 M2 1 to 2 2.20 5.50 11.50 awg#32 M3 3 to 4 3.20 5.50 11.50 awg#32 3.5 5 to 6 3.70 7.20 15.70 n/a TYPE LUG03A MINI LUG LUG39A MINI LUG LUG04A APPLICABLE WIRE SIZE CONDUCTOR SIZE (1) awg#30 to awg#24 awg#30 to awg#24 awg#30 to awg#24 awg#30 to awg#26 awgt#24 SPC awgt#30 TPC awgt#24 SPC awgt#30 SPNi awgt#32 SPNi awgt#32 SPNi Ø 0.50 TPNi INSULATION TYOE CABLE INSULATION Ø (mm) PTFE 1.12 UL2651 PVC 1.00 PTFE 1.12 PEEK 0.56 PEI 0.35 PEI 0.35 N/A N/A Note (1) AWG = American wire gage, TPC = tin plated copper, SPNi = silver plated nickel. EXAMPLES: • NTC A LUG03A 103 H • NTC A LUG03A 103 H 201 • NTC A LUG03A 103 H 205 • NTC A LUG E2 C90169 Revision: 04-May-16 NTC Mini LUG 10K 3 % 70 mm (standard length). NTC Mini LUG 10K 3 % 200 mm and standard B25/85 = 3984K. NTC Mini LUG 10K 3 % 200 mm and low B25/85 = 3435K. NTC LUG customized. Document Number: 33036 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000